D20-S5S-P-R5S Velp dispersion tool

Labconco 9000621 WaterPro PS/HPLC Pistol Polishing Station, 115V, 60HzFeatures - Timed dispense for (more) unattended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000621 WaterPro PS/HPLC Pistol Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: Ambient +5°C to 99.9°C Content: 14 liters Dimensions (WxDxH): 450 x 485 x 240 mm  (more)Internal dimensions (WxDxH): 400 x 250 x 140 mm Weight: 12 kg

Door cabinet wheels White 600x600x720

Waldner Plinth cabinet White 600×530

Fiberlite F18-8x50cy Fixed Angle Rotor THERMO SCIENTIFIC New equipment in its original packaging The (more)rmo reference: 75003663 Capacity: 8 x 50ml Max Speed : 14,500 rpm RCF Max: 24,446 ×g Compatible with models: Thermo Scientific Sorvall Legend XT/XF, Sorvall Legend X1, Multifuge X3/X3F, Multifuge X1 and SL 40F Centrifuges

LABORATORY INCUBATORS CLN SMART POL-EKO CLN - NATURAL AIR CONVECTION CLN Series incubators maintain  (more)a constant temperature from 5°C above room temperature to a maximum of 100°C. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLN SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLN SMART SERIES The six models of the CLN series cover most of your needs: from mini stoves to the 245 liter internal volume model. For larger volumes, look at the SLW series stoves. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - Door with viewing window - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20 / 60 / 100 mm access door - Additional 30 mm access door - Castors - Table with castors

Edwards T-Station 85H Wet Turbo Station - NW40 200-240V Ultimate Pressure <5 x 10-8 mbar Inlet Co (more)nnection NW40 Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application nEXT T-StationThe Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All our nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85Our T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Dry Turbo Station - NW40 200-240V includes: - Power Cord - One Year Manufacturer's Warranty

Corepoint Scientific EF301WWW-0M -15C to -25C Hazardous Location Freezer Temperature Setpoint Range  (more)-15°C to -25°C Capacity 30 Cu. Ft. Defrost Method Manual Features - Offers a combined storage capacity of 30 cubic feet, with 25 cubic feet as a refrigerator and 5 cubic feet as a freezer. - Meets NFPA and OSHA guidelines for Hazardous Location, Class 1, Division II, Groups C & D. - Utilizes R404a refrigerant with dual defrost modes—cycle defrost for the refrigerator and manual defrost for the freezer. - Built with high-density urethane foam insulation and a powder coat steel exterior, enhancing durability and thermal efficiency. - Features leveling legs that allow for stable placement and easy installation in various operational environments. The Corepoint Scientific ERF302WWW-0 Hazardous Location Refrigerator/Freezer offers a comprehensive solution for the safe storage of sensitive materials in environments with stringent safety requirements. This unit provides a total storage capacity of 30 cu. ft., with 25 cu. ft. allocated to refrigeration and 5 cu. ft. to freezing, making it highly suitable for diverse laboratory needs where both cooling and freezing are required under controlled conditions.Designed to meet NFPA and OSHA guidelines for Class 1, Division II, Groups C & D hazardous locations, the ERF302WWW-0 ensures all electrical components, including the compressor and thermostat, are isolated and sealed within vapor-proof enclosures. This precaution significantly reduces the risk of spark generation in volatile environments. The unit features a solid, right-hinged door with a magnetic gasket for a positive seal, heavy-duty handles, and three adjustable shelves in the refrigerator for flexible storage solutions. Power cord is not included - final power connections at site must be hardwired to meet local codes. INCLUDED: The Corepoint Scientific EF301WWW-0M -15C to -25C Hazardous Location Freezer includes: - 3 Adjustable Shelves (Refrigerator) - Leveling Legs - Key for Door Lock - Operator's Manual - 1 Year Manufacturer's Warranty

Maximum temperature: 150°C Temperature stability (at 37°C): ±0.005°C Temperature uniformity (at 37°C (more)): ±0.02°C Heater power: 2 kW Heat up time from 25°C to 70°C: 25 min Maximum pressure pump performance (at zero flow): 310 mbar Maximum flow pump performance (at zero pressure): 17 L/min Tank capacity: 12 L Tank dimensons (DxWxH): 325 x 300 x 150 mm Liquid depth (min/max): 80/140 mm