Revco Lab Freezer ULT430V

Manufacturer: Thermo Scientific / Revco Model: UGL-2320V Laboratory Freezer -20°C P/N: UGL2320V Desc (more)ription: Simplify operation and increase accuracy with the microprocessor control of Thermo Scientific Revco High-Performance Lab Freezers. Our Revco -30°C and -20°C high-performance freezers are designed for medical and scientific applications such as storage of reagents, pharmaceuticals, biologicals or other commonly used laboratory materials. Models offer cabinet sizes to fit a variety of space needs and storage volume requirements. Key Features: - Temperature factory-preset at -20° or -30°C. - Capacities from 4.9 to 51.1 cu. ft. (139 to 1447L). - Icon-based controls and displays. - Large, easy-to-read digital display shows temperature within 1°C. - Graphic thermometer is steady green when temperature is normal, flashes top bar for overtemperature, flashes bulb for undertemperature. Microprocessor Control: - Audible/visual warnings for overtemperature, undertemperature, or power failure. - Key-operated OFF/ON/ALARM ON master switch for setpoint security. - Push-button alarm test. - Remote alarm contacts. - Alarm silence, ringback, and auto reset. - Controller battery backup system. Construction: - Scratch-resistant cold-rolled steel interior and exterior finishes. - High-density, 2? thick (5.1cm) CFC-free urethane foam insulation protects against ambient temperature fluctuations. - CFC-free, HFC-blend refrigerant. - Single-door models are hinged on right. - Full-length door handle and key lock. - Doors self-close and lock open at 90°. - Adjustable epoxy-coated wire shelves. - 1? (2.5cm) dia. access port with plug on undercounter model. -20°C Freezers Features: Suitable for applications in which slight intermittent coil warming during an automatic defrost cycle is not desired (such as enzyme storage). Gravity convection air system for maximum stability without a blower or fan. Manual defrost. Specifications: Capacity: 659 L Dimensions (LxWxH) Exterior: 94.5 x 71.1 x 201.2cm Dimensions (DxWxH) Interior: 73.7 x 61 x 147.3 cm Temperature Range: -20°C Type: High-Performance Freezer Mains: 230V 50Hz Doors: Single, Solid   Refrigerant CFC-free 4 Shipping Weight: 193kg Temperature Control: Microprocessor Cabinet Type: Upright Defrost: Manual Items delivered: - Thermo Scientific / Revco UGL-2320V Laboratory Freezer -20°C - Shelves - Instruction Manual - Power Cord The laboratory freezer is good cosmetic as well as technical condition.

'F' Series - B Medical Systems The 'F' Series Plasma Freezers offer integrated B Medical Systems mul (more)tifunction electronics, with various alarm systems, battery backup and many other control features. The system is compatible with the °B Connected solution for remote monitoring and data logging. The polypropylene frame with one-piece print is guaranteed for life against corrosion. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. This instrument complies with national and international guidelines and regulations for Medical Devices. It offers reliability, efficiency and safety at an optimal price. Congelatore al plasma F131 - Capacità di stoccaggio (sacche di plasma da 350ml): 84 - Limite degli allarmi di temperatura freddo/caldo: -37°C / -27°C - Conforme a DIN 58375 - AABB Standards. Medical Device according to MDR (EU) 2017/745, Class IIa - Elettronica multifunzione con display a 0,1°C - Struttura anticorrosione garantita a vita Control Panel - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery The design - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times Standard equipment and accessories - 2 keys for opening the door - Electronics under lock and key - Automatic shutdown of the fan when the door is opened so as not to lose cold - Backup battery with a duration of approx. 48 hours - Acoustic alarms for exceeding high and low temperatures and/or general alarm - Remote alarm - Open door alarm - Hole for sensor input - One standard drawer + two adjustable shelves Tutta la linea dedicata alla conservazione di sangue e dericati: According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B

'F' Series - B Medical Systems The 'F' PREMIUM series plasma freezers are instruments of the highest (more) quality and with state-of-the-art functionality. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. ACCURATE TEMPERATURE AND GUARDED 24 HOURS - Controlled air cooling system for uniform and stable temperature distribution - Automatic defrost with stable temperature maintenance - Rapid recovery of the temperature even after numerous door openings - Safety thermostat to prevent freezing - Long autonomy in case of power failure - Acoustic and visual alarms with remote notification via SMS or email - °B Connected universal software for remote archive, report (FDA 21 CFR Part 1 compliant EFFICIENCY - US SNAP and F-GAS compliant high efficiency natural gas - High performance and low consumption compressor - Polypropylene chassis with one-piece print guaranteed for life against corrosion and fully recyclable CONVENIENCE - Easy access to parameters via 7' touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for the best cleaning - Low noise - Low heat emission - Modular internal equipment - Easy access to internal drawers-trays - Highest quality stainless steel - Set Point -41°C F401 plasma freezer - Storage capacity (350ml plasma bags): 345 - Cold/hot temperature alarm limit: -46°C / -32°C - Medical Device according to MDR (EU) 2017/745, Class IIa - Multifunction electronics with 0.1°C touchscreen display and monitoring software - Wide range of functions and accessories MULTIFUNCTION ELECTRONICS FOR MAXIMUM RELIABILITY - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery OPTIMIZED DESIGN FOR ENERGY EFFICIENCY - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum STRUCTURE IMPROVED AND BUILT FOR EVERLASTING DURABILITY - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times The whole line dedicated to the preservation of blood and derivatives: According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B Class ISO 5 / EC GMP A

'F' Series - B Medical Systems The 'F' PREMIUM series plasma freezers are instruments of the highest (more) quality and with state-of-the-art functionality. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. ACCURATE TEMPERATURE AND GUARDED 24 HOURS - Controlled air cooling system for uniform and stable temperature distribution - Automatic defrost with stable temperature maintenance - Rapid recovery of the temperature even after numerous door openings - Safety thermostat to prevent freezing - Long autonomy in case of power failure - Acoustic and visual alarms with remote notification via SMS or email - °B Connected universal software for remote archive, report (FDA 21 CFR Part 1 compliant EFFICIENCY - US SNAP and F-GAS compliant high efficiency natural gas - High performance and low consumption compressor - Polypropylene chassis with one-piece print guaranteed for life against corrosion and fully recyclable CONVENIENCE - Easy access to parameters via 7' touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for the best cleaning - Low noise - Low heat emission - Modular internal equipment - Easy access to internal drawers-trays - Highest quality stainless steel - Set Point -41°C F901 plasma freezer - Storage capacity (350ml plasma bags): 690 - Cold/hot temperature alarm limit: -46°C / -32°C - Medical Device according to MDR (EU) 2017/745, Class IIa - Multifunction electronics with 0.1°C touchscreen display and monitoring software - Wide range of functions and accessories MULTIFUNCTION ELECTRONICS FOR MAXIMUM RELIABILITY - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery OPTIMIZED DESIGN FOR ENERGY EFFICIENCY - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum STRUCTURE IMPROVED AND BUILT FOR EVERLASTING DURABILITY - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times The whole line dedicated to the preservation of blood and derivatives: According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B Class ISO 5 / EC GMP A

PRECISION LABORATORY REFRIGERATOR manufactured by B Medical System PRECISION REFRIGERATOR FOR PHARMA (more)CIES (glass door) produced by B Medical System SECURITY AND PEACE OF MIND - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in compliance with FDA 21 CFR Part 11) and archiving long term in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene structure injected with polyurethane foam that provides strong thermal insulation - 4-layer PMMA organic glass door offering maximum insulation, combined with weight reduction to reduce door closing efforts - Automatic internal LED lighting for lower energy consumption - Monobloc structure made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Smooth cleanable surfaces - Silent device - Low heat emission - Modular internal equipment - Easy data export to USB - Electronics with easily accessible temperature display - Heated gasket to minimize condensation - Corrosion resistant construction with lifetime warranty The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

AREX 6 by Velp Scientifica The central button activates the heating of the plate only after pressing (more) it, avoiding involuntary switching on. The safety icon informs the operator that the plate is at temperature, preventing possible burns. It will remain illuminated until the temperature is below 50°C. The knobs allow precise speed and temperature regulation with new ergonomics and greater sensitivity. CerAlTop™, High Resistance The CerAlTop™ plate, made of aluminum alloy covered with a ceramic layer, guarantees a homogeneous and fast heat transfer over the entire surface. Furthermore, the thin ceramic layer protects the straightener from scratches and chemicals. UNPRECEDENTED PERFORMANCE The brushless motor allows you to shake up to 20 liters at an adjustable speed from 30 to 1700 rpm. Thanks to the SpeedServo™ system, the speed is kept constant even when the viscosity varies. The Alnico magnet guarantees homogeneous agitation, even in the peripheral areas of the plate and a powerful magnetic coupling between motor and stir bar, a very important aspect when using accessories. MAXIMUM INSTRUMENT PROTECTION AREX 6 is an IP42 product designed to guarantee years of use and resistance in the laboratory. The structure and materials protect the internal parts of the instrument from possible damage. AREX 6 is guaranteed for 3 years. The silicone cover ensures further protection of the instrument from possible spills or splashes. ACCESSORIES OIL BATH AND HEATING MANTELS REPLACED WITH SPHERICAL CAPS The new Spherical Caps are the perfect solution for replacing oil baths and heating mantles. Furthermore, they adapt perfectly to both the 135 mm plate diameter and the shape of the tubes allowing a fast heat transfer from the plate to the tube. To increase protection and reduce thermal dispersion, VELP has designed the new PTFE Covers. GREATER VERSATILITY The MultiAlublock™ and the new MonoAlublock™ made of aluminium, are ideal for carrying out numerous stirring and heating analyses, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, it is possible to choose the mix that best suits your needs

The MSL 8 is the magnetic stirrer for large volumes and low viscosity. Ideal for: - Buffer preparati (more)on and WFI (Water for Injection) - Vaccine production - Cell cultures and tissue cultures Velp power and quality: - Brushless motor to ensure continuous high volume operation at any speed - Mixes up to 8 liters of volume (H2O) - Speed ​​range from 40 to 1500 rpm - SpeedServoTM technology maintains constant speed - Gentle start, to protect your champion - The control panel is protected against liquid spills - Durable stainless steel surface - Designed for maximum durability and guaranteed for 3 years

This listing is for a Qiagen QIAsymphony SP Sample Preparation Fully-Automated DNA RNA PurificationV (more)ery good working and cosmetic conditionThe QIAsymphony SP is a versatile nucleic acid purification instrument providing high-quality nucleic acids compatible with with most common downstream assay technologies, such as real-time PCR, digital PCR, and next generation sequencing (NGS). The large range of a dedicated QIAsymphony kits enables optimized purification of genomic DNA, cell-free circulating DNA, RNA, bacterial and viral nucleic acids from a wide range of starting materialsFeatures:Purification of high-quality genomic DNA, pathogen DNA/RNA, cell-free circulating DNA and cellular RNA1-96 samples in 4 batches, from smallest forensic samples to 10 ml sample volumesStandardized protocols for diagnostic, routine, research and forensic applicationsFlexible loading of new samples during a runProtocols customizable (protocol steps, labware, etc.) on demandTraceability and LIMS compatibilityCompatible with most commonly used sample tubes and elution tubes and platesCompatibile with QIAsymphony DSP kits for diagnostic workflows.Specification:Minimum input volume: 200µlElution volume: 30-500µlDimensions: 128 x 103 x 73cm (w x d x h)Weight: 175kgElectric supply: 100 - 230VAC 50/60Hz