Plasma freezer F401 by B-Medical-Systems

Manufacturer: Binder Model: UF V500 Ultra Low Freezer (-40..-90°C) P/N: 9020-0347 Description: The  (more)BINDER ultra low temperature freezer ensures the safe storage of samples at -90 °C. It combines outstanding environmental friendliness with low energy consumption, convenient operation and an individual safety concept. Benefits - Lowest energy consumption in its class- Environmentally friendly refrigerant- Multi-level safety concept Important characteristics - Range of temperature controller: -90 °C to -40 °C- Lowest energy consumption in its class- Powerful cascade compressor cooling unit- Environmentally friendly refrigerants R-290 and R-170- Efficient thermal insulation with vacuum insulation panels- Innovative door gasket concept reduces buildup of ice- Ergonomic door handle- Rust-proof interior made completely of stainless steel- Detachable inner doors made of stainless steel- 3 stainless-steel shelves providing flexible placement- Water cooling (depending on version)- Zero-voltage alarm contact for in-house alarm system- Ethernet interface- Elapsed time indicato- 2 access ports, Ø 28 mm, rear Specifications:Performance Data Temperature Cooling down time from 22 °C to -80 °C: 360 minTemperature fluctuation at -80 °C: 1.5°CTemperature range: -90…-40Temperature variation at -80 °C: 2.5 °CWarm-up time during power failure from -80 °C / -122 °F to -60 °C / -76 °F: 230 minElectrical data Nominal power: 1.6 kWPhase (Nominal voltage): 1~Power frequency: 50 Hz Rated Voltage: 230 VUnit fuse: 10 AUnit doors: 1 Housing dimensions not incl. fittings and connections Exterior dimensions: (WxHxD) 938 x 1966 x 826 mm Interior dimensions: (WxHxD) 605 x 1300 x 606 mm  Interior volume: 477LNet weight of the unit (empty): 247kgPermitted load: 200kgPermitted load of individual compartment: 50kgWall clearance back: 100 mmWall clearance sidewise: 250 mmEnvironment-specific data Energy consumption at set-point -80 °C and ambient temperature = 21 °C: 7.9kWh/dSound-pressure level: 47dB(A) Number of shelves (std./max.): 3 / 13Load-variants Cryoboxes, 50 mm: 352Freezer racks per compartment: 4 Itemds delivered: - Binder UF V500 Ultra Low Freezer  - Instruction Manual The Binder UF V500 Freezer is new and has never been used in lab environment.Ready for it's first duty.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

- Storage capacity (cryobox): 150 - Storage capacity (2ml vials): 15,000 - 350 ml plasma bags: 150 - (more) Preset temperature: -82°C - Cold/hot temperature alarm limit: -87°C / -77°C Ultra low freezers, or deep freezers, are devices intended for storing blood and plasma components, human cells, tissues and other laboratory samples at temperatures as low as -86°C. "U" models reflect the highest and most uncompromising requirements with state-of-the-art technology. The cooling system is optimally designed to allow very low consumption and little heat production. Medical device in accordance with MDR (EU) 2017/745, Class IIa directive THE CONTROL PANEL Extremely easy control of all parameters: - 7" color touchscreen display at eye level - Locking mechanism protected by card reader and password - Audio-visual alarm system with remote transmission in case of unexpected temperature changes and power failure - B Universal connected software for remote monitoring, recording and long-term archiving - USB port for easy data export - Alarm memory and history on the monitor with indication of the type - Ethernet interface for data management, via B software, to a PC - Backup battery (duration of at least 48 hours) - Optionally, the possibility of passing data to a db through the network. - Monitor indication of: time, input Volt, login status (user level) SAFETY AND TRANQUILITY Accurate temperature and 24-hour storage: The safety standards developed by B Medical Systems define unique technical features, ensuring the safe storage of preparations and setting the highest safety standards for the user. - Controlled air cooling system for a uniform and stable temperature distribution - Automatic defrost while maintaining a stable temperature - Rapid temperature recovery even after numerous door openings - Safety thermostat to prevent freezing - Long range in case of power failure - Audible and visual alarms with remote alert via SMS or email - °B Connected universal software for remote archive, report (according to FDA 21 CFR Part 1) More than certified tools - European regulation on medical devices: MDR (EU) 2017/745, Class IIa (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - EMC Directive: 2014/30 / EU (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - Low voltage directive: 2014/35 / UE (models: 220-240 V - 50/60 Hz and 230 V - 50 Hz) - FDA-Medical Device Regulations: 21CFR Part 864.9700, Class II (models: 115-127 V - 60 Hz and 220 V - 60 Hz) - CCSAus certified: Yes (models: 115-127V - 60Hz and 220V - 60Hz) - GMP - Clean room classification: ISO class 6 / EC GMP B ISO class 5 / EC GMP A The 'PREMIUM' line provides you with the most advanced tool you can find. The maximum of technology that you will be able to receive in your laboratory or research center, as well as for the pharmacy and hospital. These models will not serve you best today, but for decades they will remain advanced and modern tools. Tens of years of experience in the design, construction and use, in all conditions, have allowed B Medical Systems to be able to create some of the best instruments on the market. By purchasing this instrument manufactured in Luxembourg, you will save energy each day on the time used for your applications, without risking losing your precious samples. Optimized design for energy efficiency - Often polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum Improved structure and built for everlasting durability - Anti-corrosion structure guaranteed for life - Constructed by rotational molding, in high quality polypropylene for better insulation and strength - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times - Double internal door RTMD | DATI SEMPRE ONLINE WANT EVEN MORE CONTROL? As an option, you can connect your B-Medical-Systems devices to the °B CONNECTED online software. Through this software, via PC or smartphone, you will be able to have a complete overview and management of all your B-Medical-Systems instruments. - Real-time data: temperature, set point, component status, compressor data - All recorded data: alarms, temperatures, exceptional events that occurred during refrigeration - Display and settings of all parameters - Graphic display of temperature curves - Easy graphics to monitor all the devices you own - Incredibly interactive - Customizable data printing - Easy setting of specific alarms, via email or SMS alerts - Data export for third party software - Important advantage in terms of costs compared to a traditional circular paper recorder FEATURES OF VALUE EFFICIENCY - High efficiency natural gas compliant with US SNAP and F-GAS - High performance and low consumption compressor - One-piece printed polypropylene chassis guaranteed for life against corrosion and fully recyclable - Superior insulation - Ergonomic handle with special valve to open the instrument with minimum effort. CONVENIENCE AND COMFORT - Easy access to parameters via 7 'touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for better cleaning - Low noise - Low heat emission - Modular interior equipment - Easy access to the internal drawers-trays - Highest quality stainless steel - Minimal ice formation to allow easy defrosting MULTIFUNCTION ELECTRONICS - Maximum reliability - Audio-visual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal '° B Software' connected for remote monitoring, recording and long-term archiving - Electronic temperature recorder - USB port for easy export of recorded data - Data backup battery Versatile and modular - Full compatibility of internal modules and rails - no need to buy new racks, you can keep previously used racks in different U models - Cryo racks optional ... and much more. Download the data sheet for the data of each model, the standard and optional accessories.

'F' Series - B Medical Systems The 'F' Series Plasma Freezers offer integrated B Medical Systems mul (more)tifunction electronics, with various alarm systems, battery backup and many other control features. The system is compatible with the °B Connected solution for remote monitoring and data logging. The polypropylene frame with one-piece print is guaranteed for life against corrosion. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. This instrument complies with national and international guidelines and regulations for Medical Devices. It offers reliability, efficiency and safety at an optimal price. Congelatore al plasma F291 - Storage capacity (350ml plasma bags): 251 - Complies with DIN 58375 - AABB Standards. Medical Device according to MDR (EU) 2017/745, Class IIa - Multifunction electronics with 0.1°C display - Optimized design for greater energy efficiency - Anti-corrosion structure guaranteed for life - Extensive range of functions and accessories Control Panel - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery The design - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times Standard equipment and accessories - 2 keys for opening the door - Electronics under lock and key - Automatic shutdown of the fan when the door is opened so as not to lose cold - Backup battery with a duration of approx. 48 hours - Acoustic alarms for exceeding high and low temperatures and/or general alarm - Remote alarm - Open door alarm - Hole for sensor input - One standard drawer + two adjustable shelves Tutta la linea dedicata alla conservazione di sangue e dericati: According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B

PRECISION LABORATORY REFRIGERATOR manufactured by B Medical System PRECISION REFRIGERATOR FOR PHARMA (more)CIES (glass door) produced by B Medical System SECURITY AND PEACE OF MIND - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in compliance with FDA 21 CFR Part 11) and archiving long term in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene structure injected with polyurethane foam that provides strong thermal insulation - 4-layer PMMA organic glass door offering maximum insulation, combined with weight reduction to reduce door closing efforts - Automatic internal LED lighting for lower energy consumption - Monobloc structure made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Smooth cleanable surfaces - Silent device - Low heat emission - Modular internal equipment - Easy data export to USB - Electronics with easily accessible temperature display - Heated gasket to minimize condensation - Corrosion resistant construction with lifetime warranty The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

'F' Series - B Medical Systems The 'F' Series Plasma Freezers offer integrated B Medical Systems mul (more)tifunction electronics, with various alarm systems, battery backup and many other control features. The system is compatible with the °B Connected solution for remote monitoring and data logging. The polypropylene frame with one-piece print is guaranteed for life against corrosion. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. This instrument complies with national and international guidelines and regulations for Medical Devices. It offers reliability, efficiency and safety at an optimal price. Congelatore al plasma F381 - Capacità di stoccaggio (sacche di plasma da 350ml): 284 - Limite degli allarmi di temperatura freddo/caldo: -37°C / -27°C - Conforme a DIN 58375 - AABB Standards. Medical Device according to MDR (EU) 2017/745, Class IIa - Elettronica multifunzione con display a 0,1°C - Struttura anticorrosione garantita a vita Control Panel - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery The design - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times Standard equipment and accessories - 2 keys for opening the door - Electronics under lock and key - Automatic shutdown of the fan when the door is opened so as not to lose cold - Backup battery with a duration of approx. 48 hours - Acoustic alarms for exceeding high and low temperatures and/or general alarm - Remote alarm - Open door alarm - Hole for sensor input - One standard drawer + two adjustable shelves Tutta la linea dedicata alla conservazione di sangue e dericati: According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B

Technical features Flow rate: 0.2-1.3 l / min Suction (max.): 3 mWg Operating pressure (max.): 1 bar (more) (rel.) Permitted fluid temperature: 5-80°C Maximum permissible viscosity: 150 cSt Valve material: FFKM Membrane material: PTFE coating Pump head material: PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 8 mm internal diameter tube. Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Ultrasonic water bath VWR USC600T Model: USC600T Frequency (Hz): 45 Power supply: 220-240V Material: (more) Stainless steel Maximum capacity: 5.4 L Protection class: IP20 Tank dimension: 297 x 148 x 150 mm External dimensions L x D x H: 325 x 176 x 295 Gross weight: 5.5KG Traces of rust inside the tank Sold with basket

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

An economic laboratory oven but complete with the necessary adjustments and safety devices. Fine tem (more)perature regulation, clear and complete display, top safety class, front regulation of the rear air inlet. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel STANDARD:     PID thermoregulator with adjustable temperature up to 300°C     2 shelves     Rear 45 mm outlet with front device for adjusting opening/closing gap.     Safety class DIN 3.1 Microprocessor controlled Safety class DIN 3.1 (top DIN class) Laboratory Oven STE-N 52 FALC