BINDER UF V500 477L -86°C Ultratiefkühlschrank Ultra Low Freezer -40..-90°C

Temperature range: -50°C to -86°C (at 32°C maximum ambient operating temperature) Cool down time: 3. (more)7 hours (from 25°C to -85°C, freezer empty) Alarms: High/Low temperature, power fail, battery low, filter clean, fault Capacity: 101 L Internal Dimensions (HxWxD): 640 x 480 x 330 mm Dimensions (HxWxD): 830 x 900 x 566 mm Weight: 116 kg

Thermo Scientific Revco Ultima Plus ULT Freezer Model ULT3280-10HD-V43 This was removed from a univ (more)ersity lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks from use. Capacity 906 Litres Internal dimensions W 99cm x L 69cm x H 1975cm Four stainless steel shelves 98cm x 68cm

Thermo Fisher TDE60086FV Ultra Low Temperature Freezer Lab This item was removed from a university l (more)ab where it was surplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in great cosmetic condition.

Upright ultra-low freezer Thermo Forma 907. Volume 792 L. Range of Temperature of -50 to -86 ºC. A d (more)oor external and 5 internal. Display with microprocessor. Alarm system. Trays and instruction manual. Specifications: 230 V; 50-60 Hz Internal measures AnchxFxAlt cm: 93x68,5x130,8 External measures AnchxFxAlt cm: 118,9x94x197,6 Weight: 444,5 kg

Corepoint Scientific GPF231SSS-0A -15C to -25C Solid Door Stainless Steel Laboratory Freezer Tempera (more)ture Setpoint Range -15°C to -25°C Capacity 23 Cu. Ft. Defrost Method Automatic Features - Offers 23 cubic feet of storage, allowing for ample space to meet general-purpose freezing needs with ease. - Features a microprocessor temperature controller with a digital display, enabling precise control and verification of temperatures. - Includes an auto-defrost feature that maintains a frost-free interior, enhancing convenience and reducing maintenance efforts, despite the moderate temperature rise during defrost cycles. - Incorporates audible and visual high and low temperature alarms, ensuring the safety and integrity of stored contents. - Uses R290 refrigerant, which is environmentally friendly and enhances the unit’s sustainability. - Includes two probes, one in air and one in a sample bottle, for dual monitoring of environmental and specific sample temperatures. The Corepoint Scientific GPF231SSS-0A, a General Purpose Stainless Steel Laboratory Freezer is designed for rigorous lab environments. This freezer offers a 23 cu. ft. capacity within a durable stainless steel exterior and a white-powder coated aluminum interior that includes a 304 stainless steel floor, making it robust and easy to clean. Key features include a microprocessor temperature controller with a digital display that allows for precise temperature adjustments from 5°F to -13°F (-15°C to -25°C). It's equipped with three adjustable shelves and integrated LED lighting that ensures excellent visibility. The unit's self-closing, solid swing door features a magnetic gasket for a tight seal and an integrated handle for convenience, along with a keyed door lock for added security. Enhanced with audible and visual high/low temperature alarms and a dual probe system—one in the air and one in a sample bottle—this freezer provides continuous temperature monitoring and display. The probe attached to the evaporator assists in defrost termination sensing, optimizing the auto-defrost function that maintains a frost-free interior while minimizing temperature fluctuations during the cycle. INCLUDED: The Corepoint Scientific GPF231SSS-0A -15C to -25C Solid Door Stainless Steel Laboratory Freezer includes: - 3 Adjustable Shelves - 4 Swivel Casters - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Corepoint Scientific FF171WWW-0MHC -15C to -25C Flammable Material Storage Freezer Temperature Setpo (more)int Range -15°C to -25°C Capacity 17 cu. ft. Defrost Method Manual Features - Cabinet is foamed-in-place with EPA compliant high density urethane foam - Keyed door lock - Microprocessor temperature controller with digital temperature display, °C/°F switchable - Audible and visual high and low temperature alarms The Corepoint Scientific FF171WWW-0MHC Flammable Material Storage Freezer provides robust and secure cold storage solutions, specially designed for safely handling flammable and combustible materials in unclassified laboratory settings. This freezer offers a 17 cu. ft. capacity within a solid, right-hinged door equipped with a magnetic gasket for a reliable seal and a recessed handle for a sleek look and additional safety. This unit is built with high-density urethane foam insulation and a durable powder-coated steel exterior, ensuring excellent temperature retention and stability from -15°C to -25°C. It includes six fixed shelves that facilitate organized storage, and leveling legs that allow for stable placement on uneven laboratory floors. INCLUDED: The Corepoint Scientific FF171WWW-0MHC -15C to -25C Flammable Material Storage Freezer includes: - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Accessory designed for viscosity measurements of non-flowing substances. In these materials the vis (more)co- sity cannot be measured by standard methods and spindles due to cavitation effect around the spindle. We recommend using the HELDAL unit and T-bar spindles for comparative measurements on non- flowing substances. A Fungilab viscometer is mounted on the Heldal unit, and it restricts measuring head to smoothly run up and down within pre-established limits, allowing cons- tant contact between T-bar spindle and test sample thanks to the helical line described.

Mettler Toledo KF-oven sample changer Stromboli. In combination with the Karl Fischer compact titrat (more)ors C30 and V30 the Stromboli sample changer enables up to 14 samples to be titrated in unattended operation. The samples are automatically transferred into a temperature controlled oven from where the evaporated water is transferred to the titration cell via an applied gas flow.

This was removed from a university lab where it was surplus to requirements. All units are in good u (more)sed cosmetic condition but they do have various signs of general use. The system consists of: 1 x Bio-Rad Radiance 2000 Laser Scanning System.1 x Bio-Rad Motorised Focus Unit.1 x Bio-Rad Optical Unit. All of the rubber on the wheels of the Radiance has broken off. The wheels do still roll though. The Bio-Rad Radiance 2000 powers up fine, but was not tested any further.

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Scale HY10.H for statistic control Scales HY10.PGC series is equipped with module for control of pac (more)ked goods. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after pre-defined quantity of packages (samples) has been controlled. Number of the packages is fixed by scale program depending on product batch size. Scales features 10,1" colourful, graphic touch screen display and full alphanumeric keyboard aiding scale operation and setting control parameters. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scales memory and at the same time it can be printed by printer connected to the scales. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Scilogex MicroPette Pipettor, 10-100µl The Scilogex MicroPette Pipettor, 10-100µl has a volume range (more) of 10-100µl with an accuracy of 0.80/1.00/3.00±%. INCLUDED: The Scilogex MicroPette Pipettor, 10-100µl includes: - Calibration/Opening Tool - Grease - Tip - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty