Magnetic stirrer for large volumes MSL8 Velp

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Number of stirring positions: 1 Stirring quantity max. per stirring position (H2O): 15 l Maximun loa (more)d: 20 kg Speed adjustment: scale 0 – 6 Speed range: 100 – 1500 rpm Stirring bar length max: 80 mm Self-heating of the set-up plate by max. stirring (RT:22°C/duration:1h): +1 K Heating temperature range: 50 – 500°C Heat control: Turning knob Temperature setting resolution of heating plate: 5 K Connection for ext. temperature sensor: PT1000 (not included) Fixed safety circuit: 550°C Set-up plate material: ceramic Set-up plate dimensions: 260 x 260 mm Heating rate (1l H2O in H1500): 5 K/min Dimensions (WxHxD): 300 x 105 x 415 mm Weight: 8.308 kg

Yamato LT-500A Overhead Stirrer, 100-120V Speed Range 15~600rpm Max Torque 1.0N•m (10.0kgf•cm) Moto (more)r DC Brushless Motor 30W Features - Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir - Maintenance free DC brushless motor - Digital speed indicator for accurate speed setting and confirmation - Noise prevention measures for optimal work environment - More safety-oriented design Laboratory stirrer with higher torque for high viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. INCLUDED: The Yamato LT-500A Overhead Stirrer, 100-120V includes: - Clamp - Safety Cover - Chuck Handle - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato BO-500A-115V BO500 Oil Bath and MB800 Magnetic Stirrer Combination, 115V Temp. Control Range  (more) Room temp. +5 - 199°C Temp. control accuracy ±0.5°C Bath capacity ~5.2L Features - Stainless steel oil bath - Bath protection sheet to prevent operator from burning - Must be used with MB800 magnetic stirrer Stainless steel 5L oil bath and MB800 magnetic stirrer set. INCLUDED: The Yamato BO-500A-115V BO500 Oil Bath and MB800 Magnetic Stirrer Combination, 115V includes: - MB800 Magnetic Stirrer - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus Guardian 5000 e-G52HS07C Hotplate Stirrer, 120V Temperature Range Ambient + 5°C to 550°C Speed (more) Range 50 rpm to 1,800 rpm Capacity 20 L Features - Heats up to 550°C with controlled, stable temperature settings - Wide speed range from 50 to 1,800 rpm for versatile stirring - Ceramic 7 x 7 inch top plate for optimal heat distribution - High-contrast LCD display with clear heating and stirring indicators - Supports Ethernet, USB, and RS232 connections for data logging - Reliable speed stability within +/-2% accuracy - Certified safe with CE and TUV approvals - Built-in timer adjustable from 1 minute to 99 hours, 59 minutes The Ohaus Guardian 5000 e-G52HS07C Hotplate Stirrer, 120V, is engineered for high-performance heating and stirring, offering precision and safety for a wide range of laboratory applications. With a durable ceramic top plate measuring 7 x 7 inches, this unit provides even heat distribution and reaches temperatures up to 550°C, making it suitable for everything from sample preparation to solution sterilization. The stirring capability spans a versatile range of 50 to 1,800 rpm, accommodating various sample viscosities and mixing requirements. Equipped with a bright, high-contrast LCD display, the Guardian 5000 keeps heating and stirring indicators clear and easy to monitor. For enhanced connectivity, it supports Ethernet, USB, and RS232 options, streamlining data logging and remote operation. Safety-certified with CE and TUV approvals, this hotplate stirrer ensures reliability and stability, featuring built-in temperature calibration and an adjustable timer that operates from 1 minute to nearly 100 hours, making it an ideal addition to any lab setup. INCLUDED: The Ohaus Guardian 5000 e-G52HS07C Hotplate Stirrer, 120V includes: - 1.5" (3.8 cm) PTFE Coated Stir Bar - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA TWISTER, 1pc. Magnetic stirrer, 1 pc. RPM Range 100 - 3000 rpm Weight 0.6 kg Power 10W Feature (more)s - Universal & Compact: Versatile mixing device with a magnetic drive. - Multi-Position Capability: Expandable up to 30 stirring positions. - High Performance: Mix up to 5 liters at max speed of 3000 rpm. - Versatile Attachments: Transforms into a stirrer or a shaker. - Innovative Operating Concept: Intuitive 360° LED glass display. - Robust & Safe: High protection class IP 66 for harsh conditions. - Award-Winning Design: Recognized with the Reddot Award 2022. TWISTER is a universal and compact mixing device with magnetic drive. In the TWISTER SET 1, one drive is included. In the default version, TWISTER is a powerful single-position magnetic stirrer for mixing up to 5 liters at a maximum speed of 3000 rpm and a viscosity of up to 500 mPas. By connecting additional TWISTER stirring units (available as accessories, ID no. 0020112621), TWISTER can be expanded to a multi-position magnetic stirrer with up to 30 stirring positions.* The stirring positions can be controlled either separately or simultaneously (leader-follower principle). Versatile accessoriesWith the multi-position stirring attachment TW.IX, the drive is transformed into a magnetic stirrer with 9 stirring positions for efficient mixing of sample vessels with small volumes (8 - 60 ml).The TW.VX shaker attachment transforms the universal magnetic drive into a vortex or orbital shaker. Innovative operating conceptTWISTER enables a new way of interaction between user and laboratory instrument. Via the intuitive and chemically resistant 360° LED glass display, all information is intuitively conveyed without any alpha-numeric display. During operation, either the speed or the power required for stirring can be displayed. For example, viscosity changes can be observed and displayed as a percentage.Mixing can be started by pressing a button as well as (thanks to integrated beaker recognition) by placing or touching the beaker.The reverse function changes the direction of rotation at definable time intervals. This leads to a significant improvement of the mixing result, especially with samples that are difficult to mix. Robust and safeThe high protection class IP 66 allows operation under harsh conditions. TWISTER can thus be cleaned under the tap, for example, or operated in an incubator at temperatures up to 40°C. The compact and innovative design has already been awarded the reddot Award 2022. It is particularly suitable for use in laboratories with limited space. * Depending on the number of devices, a different power supply may have to be used. The included power supply is designed to power up to two devices.Click Here to View Product Video INCLUDED: The IKA TWISTER, 1pc. Magnetic stirrer, 1 pc. includes: - TWISTER S099 - Power Supply - IKAFLON® 25 Magnetic stirring bar (2 pcs.) - Two Year Manufacturer's Warranty

The Envirco MAC 10 fan filter unit, was the first (FFU) to combine low sound, low watts and a low pr (more)ofile. Measuring only 51 dBA, the MAC 10 Original Standard (600 mm x 1210 mm) provides one of the lowest sound levels of any FFU in the industry. Running at only 310 watts at 90 fpm, the unit uses less energy than traditional FFUs, lowering operating costs. The MAC 10 Original maintains a low profile, measuring less than 330 mm. MAC 10 Original comes standard with the filter integral with the unit housing, requiring the unit to be removed from the ceiling grid to replace the filter. The RSR unit has the filter sealed to the unit using the knife edge/gel seal construction, allowing the filter to be replaced from the roomside. The RSRE unit has the added feature of allowing the motor blower and filter to be replaced from the roomside. Low sound, low watts, low profile, and low operating costs. Three speed switch features low, medium, and high settings; standard on all 2 ft x 4 ft units Solid state speed controller standard on 2 ft x 2 ft, 2 ft x 3 ft, and all RSR units. Forward-curved centrifugal fan. High Efficiency Particulate Air (HEPA) UL900 Filter: 99.99% efficient at 0.3 Micron. Snap-in prefilter allows for easy replacement and maintenance. Walkable Plenum (excluding prefilter), rated at 250 lbs. Mill finished aluminum exterior. Tested to IEST recommended standards. Caution this is a 110 Volt instrument.

This listing is for a Kern EMB 220-1 Balance. The unit is in full working condition and is ready fo (more)r immediate release. The Kern EMB 220-1 is a precision balance tailored for laboratory and educational settings. Its compact design and user-friendly features make it an excellent choice for accurate measurements in various environments. Key Features: Capacity and Resolution: Maximum Capacity: 220g Resolution: 0.1g This capacity and resolution make it ideal for weighing small samples, chemicals, and powders with precision. Compact Dimensions: Size: 170 x 240 x 38 mm Weight: 600g Its lightweight and compact form factor allow for easy handling and storage, perfect for classroom or lab benches with limited space. User-Friendly Display: The balance features a large LCD display with a digit height of 15 mm, ensuring readability from a distance. This is particularly useful in crowded work spaces. Simple Operation: Designed for ease of use, it operates with a two-button interface, making it accessible for users of all experience levels, including students in educational settings. Tare Function: The tare function facilitates easy adjustments when weighing items in containers, allowing users to exclude the weight of bowls, plates, or cups for accurate net weight readings. Power Supply: The balance runs on batteries (included), enhancing portability. The automatic shut-off function helps conserve battery life during periods of inactivity. Additional Features: It includes a ring-shaped draft shield (available on certain models) to minimize the impact of air currents on measurements, ensuring greater accuracy. A hook for underfloor weighing expands its functional versatility, allowing for weighing larger or bulkier items. Applications: The Kern EMB 220-1 Balance is versatile and suitable for various applications, including: Laboratories: Ideal for weighing chemicals and samples in research and testing environments. Educational Use: Perfect for classrooms where students learn about measurements and experiments. Field Experiments: Lightweight and battery-operated, making it a practical choice for outdoor scientific work. Technical Specifications: Weighing Capacity: 220g Resolution: 0.1g Dimensions: 170 x 240 x 38 mm Weight: 600g Display: Large LCD display with 15 mm digit height Operation: Simple two-button operation Tare Function: Yes Power Supply: Batteries (included) with automatic shut-off function

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Solartron Schlumberger 7060 Systems Voltmeter was removed from a university lab where it was su (more)rplus to requirements. The unit powers up but we were unable to test it further. It is in good cosmetic condition with marks from use.

HEIDOLPH Hei-VAP rotary evaporator bath. (517-61000-00-0).  Capacity 4.5 L. Temperature range: water (more) bath from 20°C to - 100°C, oil bath from 20°C to - 210°C The HEIDOLPH Hei-VAP rotary evaporator bath is an essential accessory for laboratory equipment. Designed specifically for the Hei-VAP rotary evaporator, this bath provides precise temperature control during the evaporation process. With a capacity of up to 4.5 liters, this bath is spacious enough to accommodate a variety of samples. In addition, it has an efficient heating system that allows you to quickly reach the desired temperature and maintain it constantly. Its robust and durable design ensures long life and reliable performance. In summary, the HEIDOLPH Hei-VAP rotary evaporator bath is an ideal choice for any laboratory requiring precise temperature control during evaporation.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform in mild steel powder coated version. The HY10 series scales features mild steel powder coated construction with stainless steel weighing platform. The terminal PUE HY10 series features a 10,1” colourful touch screen display, keyboard with numeric and function keys. The scales enable cooperating with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series are offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.