Panasonic MDF-DU300H Ultra-Low Temperature Freezer Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Lot of 5 x Thorlabs TC200 Temperature Controllers This job lot of items comes from a variety of uni (more)versity laboratories. The items were no longer required, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all.

Raith Elphy Plus Pattern Generator System, LaserInterferometer, Elphy Plus, 6514 This system was rem (more)oved from a university lab where it was surplus to requirement. All included units are in good cosmetic condition and power on, we are unable to conduct further testing at our facility. The previous client has stated the system was in working order when last used, however when removing the stage from the SEM chamber they has found the fibre optic cable had become brittle and cracked. This system comprises the following; - PC Set-Up  Software Installed: ELPHY Plus Raith protocol - Elphy Plus Advanced SEM/FIB Nanolithography system - Precision Stage Controller - LaserInterferometer Source - Raith Motor control unit - Keithley 6514 System Electrometer

New Brunswick Scientific U535 -86 Ultra Low Temperature Freezer This item was removed from a univers (more)ity where it was surplus to requirement. It is in good cosmetic condition. The item powers on but does not drop in temperature, therefore it is sold as Spares or Repairs.

JEOL JEM-100CX II Electron Microscope Vacuum Pump This was removed from a university lab where it w (more)as surplus to requirements. The unit is untested but in reasonable cosmetic condition. It requires a connection to the main system, which we do not have.

This Jouan VXS 570 Laboratory Deep Freezer was removed from a university lab where it was surplus to (more) requirements. The unit powers up and was tested with a digital thermometer. It did reach -84˚C but after opening the door for the probe our thermometer measured -76˚C. The unit is in very good condition but would benefit frmo new door seal due to splits in the top. There is no key for the lock but it is unlocked.

Heating thermostat from 40°C to 250°C for professional thermostats LAUDA PRO is a cutting-edge produ (more)ct line, designed to be the laboratory tools of the future. A significant innovation was the division between thermostats dedicated to internal applications and those dedicated to external applications. Then, the choice of offering products with tanks of a few liters allows the operator to quickly reach the desired temperature. New criteria have also been adopted for the design of the control panels. Two operational approaches are available, Basic, with OLED screen and essential but professional features, and Command Touch (named 'C'), the ultimate in the LAUDA experience, with touch display, graphic displays and numerous functions. In either case, the control panel can be removed from the thermostat for maximum operational flexibility and a noticeable decrease in instrument height. All thermostats are equipped with an Ethernet, USB interface and a Pt100 connection as standard. Cooling thermostats are also available with natural refrigerants. In addition, as standard, they are equipped with a cooling system that allows a lowering of the thermostat temperature with water. Notable features - Removable control panel for remote control - Stainless steel bathtubs (insulated with handles and drain tap) - 8-stage LAUDA Vario internal pump - Ethernet interface, USB and Pt100 connection as standard - Drain cock on the front of the device Accessories included Tank covers, pipe fittings with screw caps for the cooling coil Graph of heating performance of PRO P LAUDA thermostats.

This listing is for a Labcold RVPF0734 Plasma Freezer. The unit is in full working condition and is (more) ready for immediate release. Ensure the highest standards of blood plasma storage with the Labcold RVPF0734 Plasma Freezer, a state-of-the-art laboratory-grade solution designed for optimal performance and safety. This floor-standing freezer combines advanced technology with a space-saving design, making it an ideal choice for healthcare facilities and research laboratories. Key Features: Optimal Temperature Control: Achieve a consistent temperature range of -34°C, essential for preserving plasma quality and integrity. Faster Thawing Times: Designed to minimize thawing duration's, reducing the risk of bag cracking and ensuring safe handling of sensitive materials. Convenient Storage: Equipped with front-opening doors and multiple storage drawers, allowing for easy access and organization of plasma bags. Digital Alarm and Display: Stay informed with real-time monitoring through a digital display and alarm system, ensuring immediate alerts for any temperature fluctuations. Chart Recorder: Track temperature changes over time for compliance and quality assurance. Benefits: The Labcold RVPF0734 is registered as a medical device in accordance with EU Directive 93/42/EEC and compliant with BS4376: Part 2:1996, ensuring reliability and safety in plasma storage. Its spark-free interior and lockable doors provide secure access and protection against flammable materials. Technical Specifications: Temperature Range: -34°C (tested to reach -36/-37°C) Safety Features: Spark-free interior, lockable doors Monitoring: Digital thermometer included for precise temperature tracking

This Hewlett Packard HP 6890 Series Injector Autosampler G153A was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in reasonably good cosmetic condition with marks from use.

Compact and powerful, ideal for a broad range of applications Precise measurement and control techno (more)logy, non-ageing UV sensors Choice for irradiation parameter energy or time Easy operation: Programme memory, storage of the last parameters, programme resumes after opening of the door, auto-restart after power failure Secure and stable construction, very easy to use Dimensions (WxDxH): 350 x 360 x 305mm Interior dimensions (WxDxH): 260 x 330 x 145mm Wavelength: 254 nm

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Hermle 4 x 250ml Swing Out Rotor The Hermle 4 x 250ml Swing Out Rotor is a centrifuge rotor compatib (more)le with Hermle Z366 series centrifuges. It has a maximum speed of 4,500 RPM and can generate a maximum RCF of 3,780 x g. This rotor can hold a capacity of up to 4 x 250ml, making it useful for processing medium-volume samples. The swing-out design of the rotor simplifies loading and unloading samples while ensuring efficient separation of particles into distinct layers. The rotor is made from high-quality materials to ensure its durability and reliability. INCLUDED: The Hermle 4 x 250ml Swing Out Rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty