Vilber Lourmat BLX-E254 UV-Crosslinker

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This compact device is ideally suited as an external light source for fluorescence excitation in mic (more)roscopy. The coupling takes place via liquid light guide. The optimized internal airflow cools the lamp effectively and ensures quiet operation. A resetable operating hour counter enables the control of lamp life. The brightness of the light can be varied with a mechanical dimming unit in 5 steps (0 to 100%). Lamp type: HXP R 120W/45C VIS with focussed reflector (OSRAM) Light output: Light guide retainer Storz long, for light guide active Ø 3 mm Shutter: Electrical control via interface, max. frequency 40 Hz, switching time approx. 6 ms Dimming: Mechanically, 5 Steps 0 to 100% Dimensions (WxHxD): 210 x 130 x 290 mm Weight: 4,7 kg

The 663 VA Stand can be used to perform polarographic and voltammetric measurements on the following (more) electrodes: Multi-Mode Electrode pro (MME) Rotating disk electrode scTRACE Gold The scope of delivery of the 663 VA Stand comprises all electrodes that are required for a complete measurement system, that is the Multi-Mode Electrode pro (MME), Ag/AgCl reference electrode and glassy carbon auxiliary electrode.

Using the Krups foil sealing machine, weldable household foils up to 30 cm wide can be processed.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Innovative MALDI-TOF and TOF/TOF technology designed and optimized to be easy-to-use; robust systems (more) for both traditional MALDI applications (reliable and detailed protein/peptide characterization, and polymer analysis) as well as cutting edge work (high resolution MALDI Tissue Imaging, glycan analysis or high-throughput MALDI Biotyper microbial identification). The new autoflex speed incorporates a number of key features which enhance its capabilities and value including: Enhanced Speed with a 2 kHz (kiloHertz) proprietary smartbeam-II solid-state laser and electronics for high throughput applications including LC-MALDI, MALDI Imaging, and high-throughput microbiology ID Unique FAST-SRM mode provides single reaction monitoring capabilities for imaging of drugs and metabolites in tissue Expanded High-Resolution Mass Range for analysis of polymers and Top-Down, intact protein sequencing for long sequence readouts FlashDetector technology to increase resolution and prevent signal saturation for complex samples Self-cleaning Ion Source cleans the instrument source in minutes to improve system up-time and with minimal operator maintenance Optimized Software packages for numerous applications e.g. Protein-, Peptide-, Polymer-Analyses, and MALDI Imaging, clinical research methods and the MALDI Biotyper IVD-CE workflow. The most flexible autoflex instruments are available in linear only mode, high resolution reflectron mode and the latest TOF/TOF technology (LIFT) which enables the use of various MS/MS techniques (e.g. LID, high energy CID) for fast and sensitive MS/MS experiments. Including PC and several sample plates

This Waters 410 Differential Refractometer was removed from a university lab where it was surplus to (more) requirements. The unit powers up but has not been tested further. It is in reasonably good cosmetic condition but has some marks from use.

Memmert UN75plus Natural Convection Oven 74L, 115V Setting Temperature Range +20°C to +300°C Convec (more)tion Type Natural Convection Chamber Volume 74 L (2.6 cu.ft.) Features - 74L internal volume for versatile sample sizes - Precise temperature control from +5°C above ambient to +300°C for a wide range of applications - Equipped with TwinDISPLAY, featuring two high-definition TFT-color displays for advanced control - 2 Pt100 sensors in a 4-wire circuit for reliable temperature monitoring and control - Natural convection for uniform temperature distribution without forced airflow - Pre-heated fresh air admixture with electronically adjustable air flap for optimal temperature uniformity - Comprehensive safety features, including AutoSAFETY with over- and undertemperature monitoring - Easy-to-clean stainless steel interior reinforced by deep-drawn ribbing for durability and hygiene The Memmert UN75plus Natural Convection Oven 74L, 115V offers exceptional performance for temperature-sensitive applications, with a large 74L internal volume to accommodate a wide range of samples. This advanced laboratory oven features precise temperature control, with a working temperature range of +5°C above ambient up to +300°C. Its highly accurate 2 Pt100 sensors in a 4-wire circuit ensure consistent temperature readings, while the TwinDISPLAY digital PID-microprocessor controller with two high-definition TFT-color displays provides intuitive adjustments and real-time feedback. Designed for efficiency, the Memmert UN75plus includes natural convection for even heat distribution, as well as the option to adjust the airflow with an electronically adjustable air flap. The durable, easy-to-clean stainless steel interior, reinforced by deep-drawn ribbing, ensures long-lasting performance and hygiene. Safety features such as the overtemperature monitor, mechanical temperature limiter, and integrated AutoSAFETY system protect against overheating, while the AtmoCONTROL software allows remote monitoring and data logging for precise control and documentation. INCLUDED: TheMemmert UN75plus Natural Convection Oven 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Pfeiffer HiCube 80 Neo, 40 KF, MVP 030-3 Turbo Pumping Station Final Pressure 1 x 10-7 hPa / 7.5 x  (more)10-8 Torr / 1 x 10-7 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 35 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 80 Neo, 40 KF, MVP 030-3 Turbo Pumping Station is a compact and reliable solution for high vacuum applications. With a final pressure of 1 x 10⁻⁷ mbar and a pumping speed of 35 l/s for nitrogen, it delivers efficient vacuum generation. The MVP 030-3 diaphragm backing pump operates at 1.8 m³/h, with air-cooled forced convection ensuring optimal performance. Its quiet operation, with an emission sound pressure level of ≤50 dB(A), and global compatibility make it suitable for a wide range of environments. Designed for ease of use, the HiCube 80 Neo features a 7-inch touch display and offers remote control via a web server. It’s equipped with a HiPace 80 Neo turbopump and supports flexible operation through its DN 40 ISO-KF connection flange. With a robust design and versatile input voltage range (100-240 V AC), this pumping station is ideal for demanding laboratory or industrial settings, ensuring reliability across a variety of applications. INCLUDED: The Pfeiffer HiCube 80 Neo, 40 KF, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco Filter Paper, Package of 1000Fits into topof flask to prevent partial loss of product durin (more)g freeze drying. 1" diameter (28 mm). Pore size 17 microns.No complexfilter retainer neededINCLUDED: The Labconco 7544810 Filter Paper, Package of 1000 includes: - 1000 Labconco 7544810 Filter Papers - Manufacturer's Documentation - 1 Year Manufacturer's Warranty