Ebro EBI 20 IF Interface for Temperature Logger Temperaturdatenlogger

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Planer Kryosave Compact KS/1.7 & Temperature Gauge Model KS10-230-B-F-H Both units are in reaso (more)nably good cosmetic condition, but they both have various marks and scrapes. They both power up and communicate successfully. The system comprises; Planer Kryosave Compact KS/1.7Model: KS/1.7Serial#: 3215 Planer Kryosave Temperature Gauge Model KS10-230-B-F-HModel: KS10-230=B-F-HSerial#: 3221

JEOL JEM-100CX II Electron Microscope Vacuum Pump This was removed from a university lab where it w (more)as surplus to requirements. The unit is untested but in reasonable cosmetic condition. It requires a connection to the main system, which we do not have.

New Brunswick Scientific U570-86 Ultra Low Temp -86ºc Laboratory Freezer This was removed from a uni (more)versity lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

This Hitachi H600 Transmission Electron Microscope was removed from a university lab where it was no (more) longer needed. It has not been tested but it is in reasonably good condition. It has been completely disassembled for removal. If you would like images of it in its current state, we would be happy to provide these.

Hoefer TE77X Semi-Dry Transfer Unit Transfer Area Up to 21 x 26 cm Maximum Power Settings 30 V, 500 (more) mA, 15 W Maximum Gel Capacity 12 Mini Gels Features - Included safety circuit breaker—limits voltage and current from the user's power supply, preventing electrical damage to the transfer unit - Requires minimal current—does not generate the excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent buildup of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE77X Semi-Dry Transfer Unit is an efficient and robust system designed to transfer proteins from polyacrylamide gels in under an hour, using minimal buffer. With a spacious 21 x 26 cm transfer area, this unit can accommodate up to 12 mini gels simultaneously, allowing for high-throughput transfers in less time. Engineered to prevent excessive heat buildup, the TE77X supports up to two gel layers being transferred at once without risk of drying out or halting the transfer process. This unit features durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent protein transfer. The vented electrode design helps prevent bubble buildup, which can interfere with transfer quality, while the included safety circuit breaker protects the transfer unit from electrical surges. Equipped with platinum-coated titanium anodes and stainless steel cathodes, the TE77X is built for longevity and reliability. With minimal buffer requirements, it reduces reagent costs and preparation time, making it a cost-effective choice for any lab focused on efficiency and precision. INCLUDED: The Hoefer TE77X Semi-Dry Transfer Unit includes: - Molded Base with Platinum-Coated Titanium Anode and High Voltage Leads - Hinged Lid with Stainless Steel Cathode - Blotting Paper (21 x 26 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (23 x 27.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Carl Zeiss Axioskop El Einsatz Fluorescence Microscope w/ 5 Objectives This was removed from a unive (more)rsity lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. It is made up of the following modules; Carl Zeiss Axioskop El Einsatz Fluorescence MicroscopeModel: AxioskopSerial# : 23 7412 Carl Zeiss Microscope Power Supply VHW 50f-2bModel: VHW 50f-2bSerial#: 39 26 42Lamp hours: 254.24 Carl Zeiss NAG 2, 12V 100W Stab Power SupplyModel: NAG 2 12V 100WSerial#: 39 25 85 Carl Zeiss HBO 50 Lamp housingModel: HBO 50Serial#: 44 72 20 Carl Zeiss 12V 100W Halogen HAL LamphouseModel: 12V 100W Halogen HALSerial#: 44 72 18 Pl 10x/20 Eyepiece x 2 Serial#: 44 40 32 The following Objectives: Zeiss Plan-NEOFLUAR2,5x/0,075 ∞/-Serial#: 44 03 10 Zeiss ACHROPLAN40x/0,65 ∞/0,17Serial#: 44 00 50 Olympus SPlan20PL0,46 160/0,17Serial#: 80 63 58 Zeiss ACHROPLAN10x/0,25 Ph1 ∞/-Serial#: 44 00 31 Zeiss ACHROSTIGMAT5x/0,12 ∞/-Serial#: 44 01 20

GE Healthcare Asymptote VIA Thaw CB1000 Cryo Cell Therapy Bags Dry Thawing LabSerial No. TBA0620110S (more)oftware Version 1.5.1-ed925b This item was removed from a university where it was surplus to requirement. It is in very good cosmetic condition and working order. (Thermometer not included.) Thaw loading temperatures -196˚C to 0˚CThaw temperatures 34˚C to 0˚C Last calibrated 19.01.23 The size of the cryo bags to be thawed is selectable from 25ml to 275ml.

Orbital shaker Selecta Rotaterm with heating platform. Temperature range on room plate +5 ° C to 330 (more) ° C. Temperature stability ± 1 ° c. Speed from 20 to 230 oscillations per minute. Oscillation adjustable to 15 or 20 mm. Overtemperature alarm.

Samples and applications - Preparation of foamy mixtures (ice cream, butter, margarine, icing) and s (more)preadable creams - Preparation of tablets coatings - Preparation of pharmaceutical ointments and creams - Preparation of cosmetic products (lip balm, soap, shampoo, conditioner, creams, lipstick, mascara) - Preparation of pigments, inks, paints - Preparation of biodiesel and dispersion of petroleum derivatives (e.g., asphalt) TECHNICAL DATA - Rotor diameter: 15 mm - Stator diameter: 20 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 50 - 2,000 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 19.6 m/s - Ultimate fineness, emulsions: 1-7 µm - Ultimate fineness, suspensions: 5-40 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

Gilson MINIPULS 3 Pump (Drive Unit) with Four Channel, Standard Flow Head (R4)Features - Utilizes po (more)sitive displacement pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds, makes the Minipuls 3 exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateMINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible.INCLUDED: The MINIPULS 3 Pump (Drive Unit) with Four Channel, Standard Flow Head (R4) includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty