Scilogex 5L Bath for SC100-Pro Rotary Evaporator

Speed range: 30 to 240 rpm Rotary evaporator from IKA, type RV 05 Excluding glassware, tripod and wa (more)ter bath.

K.J.Lester Nano 38 Thermal Evaporator Deposition System This item was removed from a university wher (more)e it was surplus to requirement. It is in reasonably good used cosmetic condition. The system has an electrical fault. It is sold for spares/repairs. The system includes the following items: APC uninterruptible power supplySerial No. 4B1546P22886 AOC 177SA monitorSerial No. E9847HAO13107 Pfeiffer Vacuum pumpModel TPH 261 P CSerial No. 14305535 ACP-400MB-00XE PC running Windows XP Professional and Nano 38 software Edwards FL20K Foreline TrapSerial No. 085003637 Lesker Air Valve Part PFEGL915QF25 Includes: 1 x Nano 38 software manual1 x Nano 38 operation and maintenance manual1 x inner chamber solenoid valve3 x data leads1 x keyboard

Edwards Auto 306 Thermal Evaporator Coating System This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up but has not been tested further. The system boots up and the internal pump runs. Item contains:Edwards RV12 PumpSerial#: 006774738 Edwards Oil Mist Filter EMF10Code#: A223 04 198 Edwards PV25EKASerial#: 006693767 Edwards B3060424ASerial#: 006739951

Locked-Rotor Eppendorf F 45-48-11. A capacity of 48 tubes of 1,5-2 mL. Speed 1,400 rpm. Valid for us (more)e in concentrator Eppendorf Vacufuge Plus.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

IKA RV 8 Rotary Evaporator w/ Dry Ice Condenser Speed Range 5 to 300 RPM Temperature Range Ambient (more) to 180°C Maximum Flask Size 3L Features - Manual lift with integrated safety “lift-out-function“ - Water/oil heating bath with integrated ergonomic carryinghandles - Key-button with locking function for the heating bathtemperature - Adjustable immersion angle - Digital displays for rotation speed and heating bathtemperature - Single-hand operation; ambidextrous design - Speed range 5 - 300 rpm - Additional user safety through reduced 24 V powerrequirements within the unit - Compatible with the complete range of IKA RV 10 glassware - New clamp mechanism The IKA Rotary Evaporator range gets a new family member -the RV 8. This new distilling system completes the existing series by adding afunctional basic model. The manual lift, with ambidextrous design, allows forprecise positioning of the glassware. Digital displays for rotation speed andheating bath temperature allow for optimal control of all distilling processes.New clamp mechanism to simplify the changing of evaporation flasks. INCLUDED The IKA RV 8 Rotary Evaporator w/ Dry Ice Condenser includes: - RV 8 S099 - HB digital S099 Heating Bath - RV 10.4 Dry Ice Condenser - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 8 Rotary Evaporator w/ Dry Ice Condenser Specifications Type of coolingverticalCooling surface620 cm2Motor principle DCSpeed range 5 - 300 rpmSpeed tolerance set rotation speed < 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftmanualStroke120 mmHeating temperature rangeroom temp. - 180 °CHeat output1300 WSet temperature resolution1 ±KFilling volume max.3 lDimensions (W x H x D)510 x 490 x 345 mmWeight15.5 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20Voltage100 - 240 VFrequency50/60 HzPower input1400 WDC Voltage24 VComparison of ModelsSpecificationsRV 10 Digital w/ Dry Ice CondenserRV 3 w/ Dry Ice CondenserRV 8 w/ Dry Ice CondenserType of coolingVerticalVerticalVerticalCooling surface620 cm²1500 cm²620 cm²Speed range5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorManualManualStroke140 mm150 mm120 mmHeating temperature rangeRoom temp. - 180 °CRoom temp. - 99 °CRoom temp. - 180 °CFilling volume max.3 L3 L3 LTimerYesYesYesDimensions (W x H x D)500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmRS 232 interfaceYesYesYesVoltage220 - 240 / 115 / 100 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }Request a Formal Quote

The first hot plate stirrer with embedded Wi-Fi technology Wherever you are, VELP Ermes allows the r (more)eduction of routine operations thanks to the real-time control of your AREX-6 Connect PRO. Access your analyzes from PC, Pad or smartphone, to maximize the productivity and reproducibility of your reactions. Immediate notifications and alerts will allow you to always be informed and thanks to the remote interruption you will have total control of your processes. SAFETY FIRST AREX-6 Digital PRO is equipped with 2 independent temperature reading circuits that protect the instrument in the event of a malfunction of one of the two. If the probe is not inserted into the sample being analyzed, the instrument stops heating, showing a safety message on the display. AREX-6 Digital PRO is equipped with the most advanced technology and allows you to set the maximum temperature limit required for analyzes with specific temperatures. The Lock function prevents inadvertent changes to settings by locking the instrument. CerAlTop™, High Resistance The CerAlTop™ plate, made of aluminum alloy covered with a ceramic layer, guarantees a homogeneous and fast heat transfer over the entire surface. Furthermore, the thin ceramic layer protects the straightener from scratches and chemicals. CUTTING-EDGE THERMOREGULATION AREX-6 Digital PRO offers the best thermoregulation available. The PID thermoregulation system guarantees stable, fast temperature control with minimal overshoot. VTF and Pt100 probe allow accurate and precise temperature control. It is possible to choose between 2 different thermoregulation modes: - FAST: The set temperature is reached quickly. - FINE: The set temperature is reached slowly, minimizing overshoot. UNPRECEDENTED PERFORMANCE The brushless motor allows you to shake up to 20 liters at an adjustable speed from 30 to 1700 rpm. Thanks to the SpeedServo™ system, the speed is kept constant even when the viscosity varies. The Alnico magnet guarantees homogeneous agitation, even in the peripheral areas of the plate and a powerful magnetic coupling between motor and stir bar, a very important aspect when using accessories. MAXIMUM INSTRUMENT PROTECTION AREX-6 Digital PRO is an IP42 product designed to guarantee years of use and resistance in the laboratory. The structure and materials protect the internal parts of the instrument from possible damage. AREX-6 Digital PRO is guaranteed for 3 years. The silicone cover ensures further protection of the instrument from possible spills or splashes. Technical characteristics - Speed ​​regulation precision: 5 rpm. - Temperature regulation resolution: 1°C. - Connection for digital thermoregulators: VTF / VTF EVO. - Probe connection: Pt100. - Sample thermoregulation: ±0.5°C (VTF / VTF EVO) ±1°C (PT100). - Automatic reverse rotation: yes. - Probe detector: yes. - Lock function: yes. - Hot surface warning: on display. - Heating activation button: yes. NEW INTERFACE - EASY USE Bright LED display and intuitive icons. The icons will show you: probe or thermoregulator connection, heating activation, reaching the set temperature, timer activation and rotation reversal. The speed and temperature are set by the sensitive knobs, and are activated only after they are pressed. AREX-6 Digital PRO is equipped with an advanced menu that allows you to configure the instrument with the features that best suit the needs of the individual laboratory. INTEGRATED TIMER AND ROTATION REVERSE The central button allows you to set the timer from 1min to 99h59min. You can set the timer in 2 different modes: - Snap: The timer starts counting down as soon as a function is activated (stirring or heating). - SetP: The timer starts counting down as soon as the set temperature is reached. Furthermore, it is possible to set the rotation reversal at time intervals. ACCESSORIES OIL BATH AND HEATING MANTELS REPLACED WITH SPHERICAL CAPS The new Spherical Caps are the perfect solution for replacing oil baths and heating mantles. Furthermore, they adapt perfectly to both the 135 mm plate diameter and the shape of the tubes allowing a fast heat transfer from the plate to the tube. To increase protection and reduce thermal dispersion, VELP has designed the new PTFE Covers. GREATER VERSATILITY The MultiAlublock™ and the new MonoAlublock™ made of aluminium, are ideal for carrying out numerous stirring and heating analyses, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, it is possible to choose the mix that best suits your needs.

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

A&D Weighing Gemini GR-300 Analytical Balance, 310 g, 0.1 mg Capacity 310 g Readability 0.1 mg  (more)Repeatability 0.1 mg Features - Splash/Dust Proof Membrane Keypad - Easy to clean antistatic breeze break, ABS housing, and SS pan, spill ring, dust plate & base floor - Stable die cast aluminum base with built-in internal weight that performs automatic self-calibration - Easy to see large .7in (17.8mm) LCD display with simple 6 button keypad interface - Super visible front mounted spirit level bubble helps reduce leveling time and increase accuracy - One touch Full Digital Calibration (internal & external) ensures balance is calibrated onsite for the best performance - Space saving footprint and collapsible doors maximize valuable bench space and reduce breeze break mishaps - Handy step card and door control lever opens either side of the weighing chamber for quick and efficient access - Easy-click door lock joints enable user to quickly configure doors to fit weighing work flows The A&D Weighing Gemini GR-300 Analytical Balance, 310 g, 0.1 mg, is crafted for precision and ease of use, equipped with advanced features tailored to meet the demands of diverse laboratory environments. Its splash and dust-proof membrane keypad, along with a robust die-cast aluminum base, provides durability and stability. The built-in internal calibration weight enables automatic self-calibration, ensuring consistent accuracy. A large 0.7-inch LCD display and straightforward six-button keypad interface make the balance easy to read and operate, while the front-mounted spirit level bubble helps users quickly achieve accurate leveling. With an anti-static breeze break and ABS housing, along with stainless steel components such as the pan, spill ring, and base floor, the Gemini GR-300 is designed for easy maintenance and long-lasting performance. The compact footprint and collapsible doors save valuable bench space and reduce accidental mishaps, while easy-click door lock joints allow users to adjust the chamber for convenient access and workflow efficiency. The Full Digital Calibration function supports both internal and external calibration, allowing quick, reliable calibration on site for peak performance. For data management, this model includes a memory function to store up to 200 weighing data records and complies with GLP/GMP/GCP/ISO output standards. Connectivity options include bi-directional RS-232C, and with the underhook for below-weighing applications, the Gemini GR-300 adapts to various tasks with precision. Supported by a 5-year warranty, this balance ensures reliable performance for your lab’s most critical measurements. INCLUDED: The A&D Weighing Gemini GR-300 Analytical Balance, 310 g, 0.1 mg includes: - Weighing Pan - Breeze Break Ring - Dust Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Gilson Microman M1000E Pipette, 100-1000ul The ergonomically designed MICROMAN® E positive displacem (more)ent pipettes, along with disposable capillary piston (CP) tips, provide the highest precision when pipetting viscous, non-aqueous liquids such as oils, blood, glycerol, and more, while protecting the pipette from contamination. MICROMAN E is available in six models covering a volume range of 1 to 1000 µL. MICROMAN E relies on positive-displacement technology to improve the precision of transferring viscous and volatile liquids. The capillary piston (CP) tips eliminate the air cushion between the sample and piston so volume accuracy is not affected by the sample’s properties. Tackle these issues with MICROMAN E: Viscous solutions—difficult to aspirate and stick to pipette tips. Volatile solutions—leakages are created from differences between solvent vapor pressure and the air pressure within the pipette. Cold liquids—delivered in excess amounts. Hot liquids—under-delivered amounts. Designed with Comfort and Performance in Mind The Red Dot Award winning design of the MICROMAN E features an improved handle shape that rests comfortably in your hand, with a large push button for easy aspiration and dispensing. The volume-locking switch allows for easy volume adjustment and minimizes the risk of accidentally changing the volume during pipetting tasks. Overall Protection The positive-displacement technology of the MICROMAN E is ideal when dealing with infectious solutions and radiolabeled components. Since the disposable piston makes direct contact with the sample, the user and the pipette are protected. Within molecular biology and forensic sciences, any trace of a previous sample can lead to erroneous results and the disposable CP tips provide absolute protection against cross-contamination. INCLUDED: The Gilson Microman M1000 Pipette includes: - Operator's Guide - One Year Manufacturer's Warranty

Labconco 7814800 Acid Trap Insert The Labconco 7814800 Acid Trap Insert Traps is connected between a (more)n evaporator and vacuum pump to provide additional protection to the pump. The insert contains acid neutralizing desiccant that changes from off white to purple when exhausted. Please Note: This includes the insert ONLY and requires a Clear Polypropylene Canister with mounting bracket or Clear Polypropylene Canister with stand for proper use. INCLUDED: The Labconco 7814800 Acid Trap Insert includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty