Edwards T-Station 85H Dry Turbo Station - NW40 200-240V

Two-channel interface box

Principle: Airborne microorganisms are collected on microbiological agar by impaction which is achie (more)ved by aspiration. Nominal air flow rate: 100 litres of air per minute Impact speed: <20m/sec Air sample volumes: 10, 20, 30, 50, 100, 200, 500, 1000 litres are preset (standard mode), up to eight other volumes can be selected and stored in the instrument (user mode). The maximum volume of air per cycle is 1000 litre. Suitable plate diameter: 90 mm Size: 105 x 100 x 290 mm Weight: 1750 g

Ohaus 30400172 Modular Heat Block, 12 x 15 mL Conical Tubes The Ohaus 30400172 Modular Heat Block, 1 (more)2 x 15 mL Conical Tubes is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400172 Modular Heat Block, 12 x 15 mL Conical Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle 50ml Round Insert (2pk) The Hermle 50ml Inserts are for use with the 6 x 85ml Rotor for the Z (more)326 and Z326 K centrifuges. INCLUDED: The Hermle 50ml Round Insert (2pk) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris SmartDrop Accessory Plate for MR9610 The Accuris SmartDrop Accessory Plate for MR9610 is des (more)igned for use with the Accuris MR9600 SmartReader 96 Microplate Absorbance Reader. This specialized accessory plate is perfect for high-throughput laboratories that require precise and accurate absorbance measurements of exceptionally small volumes (&lt;0.5ul). The SmartDrop Accessory Plate can accommodate up to 16 samples, making it an ideal tool for checking nucleic acid concentrations and purity for Next Gen Sequencing, or protein concentrations. The SmartDrop plate is designed with a peristaltic pump that delivers accurate and precise liquid handling, minimizing the risk of sample cross-contamination. INCLUDED: The Accuris SmartDrop Accessory Plate for MR9610 includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Lec Freestanding Refrigerator This item was removed from a university lab where it was surplus to re (more)quirements. This item is in good cosmetic condition. The unit powers up and is in full working order. It was tested with a digital thermometer (not included).

748 x Laboratory Gene &amp; Cell Pool Coveralls All items are brand new in their original packaging (more). All sizes included: XS - 68S - 160M - 180L - 180XL - 120XXL - 40

This system was removed from a university lab as surplus to requirements. The lab reported: "Hasn’t  (more)been used for a few years. I am told it was working fine last time. " Genomic Solutions Cartesian Dispensing System ,Honeybee SD 8+1 Active.&nbsp;Model 6PCSDBXL-00. The system in the perspex enclosure was in good working order prior to it being disconnected. There is also included a spare unit which the university was using to provide spare parts. There are eight tube rails each holding 24 tubes. There are two Dell GX520 PC's that both have Microsoft XP pro installed and the software for the honeybee installed. There are no personal data on either of the units and all passwords and usernames have been changed on both. A HP 1702 monitor, usb keyboard and mouse are also included. It also comes with instruction books and a CD-Rom of software with Cartesian AXSYS V81.6.2. Included are the following; Model Honeybee 8+1 Active (complete)Serial No. H2755 Model Honeybee 8+1 Passive (incomplete)Serial No. HSD2756 2 x Dell Optiplex GX520 PCs running Windows XP ProfessionalSerial Nos. JQBJOB1.&nbsp;BBVD891 HP 1702 17" monitor Serial No. CNN407072Y Dell keyboard RT7D50 Serial No. CN-OW7658-37172-58O-08FI Passed a PAT test on 10.06.24The Honeybee unit powered on with power indicator lights showing on the main panel and injection head.A small vacuum pump powered on and generated suction.The first PC powered on but would not boot up properly, the second booted up and loaded windows and showed the software icons.When the icons were selected attempts were made to communicate with the Honeybee hardware but were not successful.The com cables reconnected into different ports but the data link could not be made. Software:Genomic Solutions AxSys Ver 81.6.2&nbsp;November 2005 Manuals:3 x Genomic Solutions Training Guide V4 May 20061 x Genomic Systems Cartesian Honeybee Bench-top Protein Crystallisation System Operating Manual Version 1.0 January 2003 Included:8 x 24 position tube holders1 x barcode reader1 x small vacuum pump1 x Dell mouse5 x data cables

MARSHALL Select MS-RE100A Tube Roller, 10-100 RPM Speed Range 10 to 100 RPM Number of Rollers 6 Roll (more)ers Roller Length 11.02 in. Features - Features a speed range of 10 to 100 RPM for precise mixing control - Accommodates up to 5 sample tubes simultaneously, increasing lab efficiency - Each roller measures 11.02 inches, suitable for a variety of sample sizes - Provides accurate and consistent speed adjustments - Ideal for mixing blood samples, viscous substances, and preventing coagulation - Designed to withstand the rigors of continuous laboratory use The MARSHALL Select MS-RE100A Tube Roller, 10-100 RPM is a versatile and efficient mixing solution designed for laboratories that require gentle yet thorough mixing of samples. Featuring dual rocking and rolling modes, this tube roller is ideal for a variety of applications, including mixing blood samples, handling viscous substances, and preventing blood coagulation and immune precipitation. With an adjustable speed range of 10 to 100 RPM, the MS-RE100A ensures precise control over mixing processes, accommodating a wide range of sample viscosities and mixing needs. The six-roller design, each with a length of 11.02 inches, allows for the simultaneous mixing of multiple tubes, enhancing productivity in busy lab environments. Equipped with a brushless DC motor, the MS-RE100A provides reliable, maintenance-free operation and supports a maximum loading weight of 8.8 lbs. The tube roller's compact dimensions (18.4 x 9.8 x 4.0 inches) and lightweight design (12.1 lbs) make it easy to integrate into any laboratory setup. Its simple speed display and electronic speed control ensure accurate and consistent performance. With electrical requirements of 110-220V and 25W power consumption, the MS-RE100A is an energy-efficient choice for labs seeking to optimize their mixing capabilities without sacrificing space or power. This tube roller is an indispensable tool for labs focused on achieving consistent and precise mixing results across a variety of sample types. INCLUDED: The MARSHALL Select MS-RE100A Tube Roller, 10-100 RPM includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7&rdquo; graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator&rsquo;s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Eppendorf 5920R Refrigerated Centrifuge The Eppendorf 5920R Refrigerated Centrifuge is a large bench (more)top refrigerated centrifuge with exceptional performance and high capacity, making it a superior choice for high-throughput applications. The Eppendorf 5920R combines outstanding functionality with an advanced operating system. It has a menu-driven, multilingual operation menu with a large backlit display that allows the user to save up to 99 programs. The FastTemp Pro function is also featured, providing fast, automated pre-cooling using a pre-programmable time and date. The refrigeration system also utilizes Dynamic Compressor Control (DCC) technology for precise cooling performance. The Eppendorf 5920R Refrigerated Centrifuge has a wide variety of rotors, buckets, and adapters available to spin all commonly used tubes, bottles, and plates. With high centrifugation speeds of up to 13,700 RPM (21,194 x g), the 5920R is certainly capable of suiting a large multitude of different applications. This centrifuge also features automatic rotor recognition along with imbalance detection for maximum operational safety. Please Note: This centrifuge includes the S-4x1000 Swing Bucket Rotor and Round Buckets, not the buckets and adapters depicted in the photo above. The included rotor reaches a maximum speed of 3,700 RPM (3,428 x g). Click Here to View Product Video INCLUDED: The Eppendorf 5920R Refrigerated Centrifuge includes: - S-4x1000 Rotor and Round Buckets - 1 Set of 5x50ml Adapters, Cat # 5825732006, Set of 2 - 1 Set of 14x15ml Adapters, Cat # 5825734009, Set of 2 - Operator's Guide - Power Cord - Full One Year Parts and Labor Warranty Eppendorf 5920R Centrifuge SpecificationsMaximum Speed13,700 RPM (3,700 RPM with included rotor)Maximum RCF21,194 x g (3,428 x g with included rotor)Maximum Capacity4 x 1000ml (4 x 1000ml with included rotor)Temperature Range-11°C to 40°CTimer10 seconds to 99:59 hours, continuousDimensions (W x D x H)29.2 x 27.8 x 15.9 in (74 x 71 x 40 cm)Weight306 lb.Electrical Requirements120V, 50/60HzComparison of ModelsSpecifications5424R w/ FA-45-24-115425R w/ FA-24x25427R w/ FA-45-30-115702R w/ A-4-385810R w/ A-4-625810R w/ A-4-815910 Ri w/ S-4xUniversal5920R w/ S-4x1000Max Speed (RPM)150001506016,220 (14,000 with rotor)440014,000 (4,000 with rotor)14,000 (4,000 with rotor)14,000 (4,500 with rotor)13,700 (3,700 with rotor)Max RCF (x g)211302130025,001 (20,817 with rotor)300020,800 (3,200 with rotor)20,800 (3,200 with rotor)22,132 (3,849 with rotor)21,194 (3,428 with rotor)Capacity24 x 2.0 ml24 x 1.5/2.0 ml, 10 x 5.0 ml48 x 1.5/2.0 ml (30 x 1.5/2.0 ml with rotor)4 x 100 ml4 x 400ml (4 x 250ml with rotor)4 x 400ml (4 x 250ml with rotor)4 x 1000ml4 x 1000ml (4 x 1000ml with rotor)Temperature Range-10°C to +40°C-10°C to +40°C-11°C to +40°C-9°C to +40°C-9°C to +40°C-9°C to +40°C-11°C to +40°C-11°C to +40°CTimer30s to 9:59h10s to 9:59h10s to 9:59h1 to 99 min1 to 99 min1 to 99 min10s to 99h 59m10s to 99:59hDimensions (WxDxH)9.30 x 12.60 x 8.94 in11.42 x 18.9 x 10.24 in12.6 x 21.3 x 10 in380 x 580 x 265mm24 x 28 x 13 in24 x 28 x 13 in28.3 x 25.9 x 14.5 in29.2 x 27.8 x 15.9 inWeight21 kg46.3 lb (21 kg)66.1 lb (30 kg)36 kg218 lbs218 lbs240.3 lb (109 kg)306 lbPower Requirements120V, 50-60 Hz120V, 50/60Hz, 3.2A, 360W120V, 50/60Hz, 4.6A, 550W120V, 50-60 Hz120V, 50/60Hz, 20A120V, 50/60Hz, 20A120V, 60Hz, 12A120V, 50/60Hz.comparison-table tr td:nth-child(9) { background-color: #fffacd; }