Micro-evaporator, glass oven, BUCHI B-585 Kugelrohr

The Buchi R-205 rotavapor is designed for applications associated with solvent evaporation. This rot (more)avapor is extremely suitable for, among other things, the distillation of solvents, for the evaporation of solvents and suspensions and for the (re)crystallization of liquids in the rotating evaporation flask. The distillations can be carried out under vacuum and atmospheric pressure. This increases performance and helps protect products. Speed: 0-250 rpm External dimensions (WxDxH): 450 x 360 x 1000 mm Pressure: 0 – 1400 mbar Temperature range: 20ºC to 180ºC

Savant Speed Vac Model SPD121P Centrifugal Concentrator Evaporator This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up and is in good working order, though it has not been tested under a vacuum

41 x Pcs Rotary Evaporator Condenser Glassware These were removed from a university lab where they  (more)were surplus to requirements. All units are used but are in good, clean cosmetic condition. Included are; 15 x 30cm x 7cm two inlets, two outlets4 x 33cm x 7cm two inlets, two outlets12 x 28cm x 3cm two inlets, two outlets5 x 18cm x 6cm Linton 10ml separator traps six nozzles, three with taps, two without4 x 15cm x 3.5cm through flasks with three nozzles1 x 20cm x 6.5cm Quickfit MF29/3/250 wash bottle 250ml

Yamato RE-202-A Rotary Evaporator (Main Unit Only), 115V Speed Range 5~315 rpm Evaporation Capacity (more) Up to 23 ml/min Operating Ambient Temp. Range 5~35°C Features - Rotate faster & slower (315 rpms – 5 rpms) than any other rotary evaporator on the market, so you can test new SOPs and develop better methods. - Easily manage your expensive samples with small flask sizes (from 100ml to 2L). - Program rotation direction changes, ramps, and other automations to get more done in the lab at once. - Easily analyze the residue left over after distillation. - Orient for left or right-handed operation based on your limited bench space. Standard rotary evaporator with slide jack mechanism for convenient height adjustment. Market leader in rotation speed range at 5~315 rpm. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato RE-202-A Rotary Evaporator (Main Unit Only), 115V includes: - AC adapter - Bath Guide - Rear Cover - Single-Sided Tape Fastener Roll - Double-Sided Tape Fastener Roll - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex 5L Bath for SC100-Pro Rotary Evaporator The Scilogex 5L Bath is for use with the SC100-Pro  (more)Rotary Evaporator. INCLUDED: The Scilogex 5L Bath for SC100-Pro Rotary Evaporator includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Wild Heerbrugg LNA 2l Rotating Laser Level Lab This item was removed from a university where it (more) was surplus to requirement. It is in very good cosmetic condition, it has not been powered on or tested further. Additionally, includes a Handheld LPD2 control and the original carry case.

This system was removed from a lab as it was no longer required. It was in full working order prior  (more)to removal from the lab. An engineer from Pacific Biosciences prepared the system for removal from the lab, including removing all the systems cladding, but unfortunately had to cut a few cables between the main unit and the environmental chamber. Whilst the blade server is included with the system, it has been wiped, so software may need reinstalling if you intend to use the system in full again. Strangely the information plate on the back of the unit just says 'PacBio RS' and not 'PacBio RS II' as would be expected, but the lab called it an RS II, and the cladding on the front says RS II, so we presume this is RS II. The engineer said that whilst getting the unit up and running again might be difficult, there is an enormous value of the system in parts. Apparently the camera part alone cost £125k. We have not removed any parts from the system whatsoever.

Precision in PRO version The CY10 series precision balance is designed for fast, accurate and repeat (more)able weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 series precision balance: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Precision balance and labelling scale in one device If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series precision balance can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Edwards nXR90i NW40 Multi Stage Roots Dry Pump Ultimate Vacuum 0.03 mbar (0.022 Torr) Inlet Connecti (more)on NW40 Displacement 90 m 3h-1 Features - Achieves an ultimate vacuum of 0.03 mbar (0.022 Torr), ideal for precision tasks - Supports a maximum outlet pressure of 0.2 bar gauge for enhanced application flexibility - Operates at a continuous inlet pressure of 1013 mbar, accommodating various systems - Maintains a leak tightness of < 1x10⁻⁶ mbar l/s for reliable operation - Designed to fit under benchtops, optimizing laboratory space - Ensures a clean, oil-free operation, reducing contamination risks - Keeps the vacuum chamber free from dust, maintaining a clean environment - Seamlessly integrates into existing vacuum systems for OEMs - Provides reliable vacuum performance over long periods, ensuring operational stability - Low maintenance reduces downtime ensuring research continuity Edwards has revolutionised the vacuum pump market with the new nXRi high performance, compact dry pump. It delivers unrivalled pumping speeds in the most compact package, with pumping speeds of 30 to 120 m3h-1. The nXRi's lower input power and zero maintenance create real performance improvements and cost benefits across a range of applications.Analytical Instrument OEMs benefit from the ease of integration into most vacuum systems for a ready to go vacuum solution, perfect for mass spectrometry, electron microscopy and leak detection. R&D and Industrial customers will enjoy the design flexibility, oil-free and low maintenance features.Click Here to View Product Video INCLUDED: The Edwards nXR90i NW40 Multi Stage Roots Dry Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty