IKA Ultra TURRAX® T 18 Digital Disperser Package, 1 - 1,500 ml

A homogenizer is a laboratory or industrial instrument used for the homogenization of various types  (more)of materials, such as fabrics, plants, food, soil and many others. The OV 625 Digital laboratory disperser guarantees the highest level of reproducibility for a wide range of laboratory applications. Cutting-edge technology and engineering, like all Velp scientific products, guarantee precision and high shear force for rapid homogenization, emulsification, suspensions and high-speed mixing of biological tissues, pharmaceuticals, cosmetics and food products. Excellent mechanical properties and high chemical resistance make it suitable for even the most demanding laboratory challenges. DISPLAY AND CONTROL Bright, intuitive LED display and rotary knobs allow you to fine-tune the speed between 3,000 and 25,000 rpm. Clear speed information on a black background aids visibility in all conditions. SAFE AND RESISTANT Safety features ensure maximum operator protection. For example, once the set point speed has been set, the OV 625 Digital will reach it gradually. In addition, various alarms warn the user in case of overload and overtemperature. The resistant and hermetic structure allows correct operation even in the most difficult conditions. Warranty up to 3 years. For maximum comfort, choose the model with the double pole stand. CHOOSE THE SUITABLE ACCESSORY Choosing the right dispersing tool is essential to achieve maximum performance and high reproducibility. VELP dispersion tools are made of stainless steel (316L) and equipped with a PTFE seal, to be compatible with different types of samples and reagents. To handle different fluids, different dispersion tools are required. In some applications it is necessary to use two dispersing tools in order to achieve a final fineness level from coarse to fine. Thanks to a knob and a quick fastening system, inserting and changing the dispersion tool is simple and fast: in seconds you can switch from one application to the next. FOCUS ON THE PRODUCT What is a disperser? The disperser can be called in several different ways: homogenizer; Cell Lysor, High Shear Mixer, Polytron, Stator Rotor Homogenizer, Sonicizer or Tissue Tear. The various nomenclatures are due to the various uses of this tool and you have different results that can be obtained through the accessories. Essentially, a disperser is used to create a uniform mixture by forcing the sample through a narrow, confined space. Blade homogenizers, such as Velp's OV 625 Digital, use the blades as a rotor for dispersing. How does it work? The dispersing tool consists of a rotor rotating at high speed inside a stationary stator. The area between the rotor tip and the stator slot is called the shear gap. Thanks to the high circumferential velocity, the fluid is drawn axially into the dispersion head and forced radially through the cutting gap, breaking up the particles.

IKA T18 Digital ULTRA-TURRAX Disperser Speed Range 3,000 to 25,000 RPM Viscosity Max. 5,000 mPas Sti (more)rring Quantity Max. 1.5 l Features - Digital speed display - Electronic speed control - Electronic overload protection - Stainless steel dispersing elements can be cleaned quickly and easily - Plastic disposable dispersing elements are available in two sizes - Error code display - Quiet operation The competitively priced dispersing instrument for volumes from 1 – 1500 ml (H2O) features a digital speed display. It offers a wide speed range from 3000 – 25,000 rpm, enabling users to work at high circumferential speeds even with small rotor diameters. A broad choice of dispersing elements guarantees a wide range of applications. The instrument includes electronic speed control and overload protection for reliable operation. Stainless steel dispersing elements can be cleaned quickly and easily, while plastic disposable elements are available in two sizes. Additionally, it operates quietly and features an error code display for easy troubleshooting.

IKA T25 Digital ULTRA-TURRAX Disperser Speed Range 3,000 to 25,000 RPM Viscosity Max. 5,000 mPas Sti (more)rring Quantity Max. 2 l Features - Digital speed display - Electronic speed control - Electronic overload protection - Stainless steel dispersing elements can be cleaned quickly and easily - Plastic disposable dispersing elements are available in two sizes - Error code display - Quiet operation The high-performance dispersing instrument for volumes from 1 – 2000 ml (H2O) features a digital speed display. It offers a wide speed range from 3000 – 25,000 rpm, enabling users to work at high circumferential speeds even with small rotor diameters. A broad choice of dispersing elements adds versatility, making it suitable for applications ranging from homogenizing wastewater samples, use in laboratory reactors, dispersion tasks under vacuum/pressure, and sample preparation in medical research. The instrument boasts a motor rating input of 800 W and an output of 500 W. It includes electronic speed control and overload protection, ensuring reliable performance. Additionally, it operates quietly and features an error code display for easy troubleshooting. The dispersing tool is not included in the scope of delivery.

IKA T 18 Mini Digital ULTRA-TURRAX Disperser Speed Range 3000 to 25000 RPM Viscosity Max. 2000 mPas  (more)Stirring Quantity Max. 1.5 l Features - Wide speed range of 3000 – 25,000 rpm for working volumes up to 1.5 liters (H2O) - Compact design with a 40% smaller footprint compared to similar models, ideal for tight lab spaces - Brushless DC motor for improved longevity, quieter operation, and dust-free applications - Digital speed display and stepless speed adjustment for precise control - Clear TFT display for easy readability of speed and timer settings, even from outside a fume hood - Timer function enables unattended operation and ensures reproducible results - Dispersing elements available in stainless steel for chemical resistance or in plastic options for varied applications - Quick-insert design for easy dispersing element changes and convenient cleaning The IKA T 18 Mini Digital ULTRA-TURRAX Disperser is a compact, high-performance dispersing instrument designed for precision and efficiency in small laboratory spaces. With a wide speed range of 3000 to 25,000 rpm, it accommodates working volumes up to 1.5 liters (H₂O) and viscosities up to 2000 mPas. Its space-saving design is 40% smaller than comparable models, making it ideal for tight lab setups without compromising functionality. The brushless DC motor ensures quiet, dust-free operation, extended durability, and reliable performance, while the digital speed display and stepless adjustment enable precise control for a variety of applications. Equipped with a clear TFT display, the T 18 Mini Digital allows easy monitoring of speed and timer settings, even from outside a fume hood. The timer function supports unattended operation, ensuring reproducible results with minimal supervision. Compatible with stainless steel dispersing elements for chemical resistance and plastic options for versatile use, the quick-insert design simplifies element changes and cleaning. Additional features like the USB-C interface enable remote control and parameter documentation using IKA labworldsoft® software, making this disperser a versatile and user-friendly solution for emulsification, homogenization, and particle size reduction.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Agilent Technologies G1158A 1200 Series 2 Position/6 Port Valve was removed from a university l (more)ab where it was surplus to requirements. The item is in good cosmetic condition but due to the power supply not being included, we are unable to test it. Power supply not included.

B Medical Systems Plasma Storage Laboratory Freezer FR 410 G This was removed from a lab where it wa (more)s surplus to requirements. We are told it was barely used by the client. The unit powers up and has been tested with a digital thermometer (not included) to -41˚C. It is in excellent cosmetic condition. Internal dimensions - L50 W66 H87cm2 Shelves 63 x 47cm2 Drawers 59 x 46 x 6cm

Captair Erlab Ministore 822A - GB Cabinet Lab This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and powers on, with fan operating.

The Bioptechs Delta T heated lid device, which will provide a condensate free optical surface on top (more) of a Delta T dish through which specimens can be trans-illuminated on a inverted microscope. It also provides a port for the introduction of gas above the specimen. The Delta T is unlike any other specimen-warming device. It transfers heat directly to the cells by means of an electrically conductive optically transparent coating on the underside of the glass surface on which the cells rest. Please familiarize yourself with its operation and characteristics before conducting an experiment. The temperature transfer capability of the Delta T is extremely fast.Therefore, any time a new dish is placed into the stage adapter you must first press the “Reset” button to tell the controller that it is regulating a new dish. If the controller has been left on without a dish in the stage adapter or the stage adapter has not been plugged in while the controller is on, the controller will go out of range attempting to regulate something that is not there! Pressing the “Reset” button brings the controller back to its proper starting point.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Maximum Robustness The HRP high resolution scales are very robust. Their platforms are recognised to have an IP 67 level of protection. They feature additional sealing elements to protect against dust, dirt, and moisture and can thus be cleaned with a pressure washer. 9 advantages The ability to weigh loads up to 150 kg on a large pan with high readability and good repeatability, minimal eccentricity error over the entire range, fast and stable measurement (achievable within 1 second), stability of parameters over time and after transport, and a pan dimension adapted to the scale’s readability – all this is the result of using a measurement system based on improved RADWAG MonoBLOCK technology. The new – taller and larger – RADWAG MonoBLOCK has enabled the best repeatability and speed in the class of high-resolution industrial weighing platforms. Repeatability not repeatable by others Automatic adjustment with an internal weight not only guarantees the best quality of work and repeatability of results, but also saves time and provides comfort. For such industries as pharmaceutical, chemical, food and… HY10.HRP H scales are ideal for industrial conditions where high readability and repeatability of measurement are required, such as in the pharmaceutical, chemical and food industries. The HY10.HRP and HX7.HRP scales whose terminals are made of stainless steel can be used even in the most demanding wet environments. Choose a terminal HRP high-resolution scales can work with one of two industrial terminals: PUE 7.1 and PUE HY10. The PUE 7.1 terminal has: 5.7-inch color resistive display a touch-sensitive keyboard ABS plastic housing IP 43 protection rating communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, Wi-Fi®, optional additional modules: additional A/D converter module DP6. The PUE HY10 terminal features: 10.1-inch color graphic display touchscreen keyboard stainless steel housing IP 68/69 degree of protection communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, optional additional modules: Wi-Fi®, RS485, Profibus, Profinet, moduł wyjść analogowych, 12 IN/ 12 OUT. The power of steel The use of stainless steel for weighing pan construction guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the HRP high-resolution scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Use the potential Barcode scanners, receipt printers, label printers or additional displays – thanks to multipurpose software, HY10 scale can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations, differential weighing, labelling, peak hold and statistics. The power of HY10’s working mods.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).