Centrifuges

The Frontier™ 5000 Series FC5707-K Kit is a reliable, compact, low-speed multifunction centrifuge id (more)eal for general laboratory applications. The included rotor standard options can process both round and conical bottom tubes (including common blood tubes) and can be easily retrofitted with accessories to process smaller tubes. Included in the FC5707-K model you will have the angular rotor with a maximum capacity of 8 x 15 ml. Features: Maximum relative centrifugal force (x g) at 4.445 g; maximum speed 6,800 rpm; tube diameter without adapter 18mm / 15ml, 1.5ml; outer/inner radius 86 mm; angle 32°. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. ELEGANT AND PRACTICAL DESIGN Compact design saves bench space: By packing all of its functionality into a small footprint, the FC5707 saves bench space in the laboratory. STRUCTURE AND FUNCTIONALITY Modern touch-wheel control and elegant waterproof interface: Designed for ease of use, the FC5707 features a convenient control on a waterproof user interface, which allows effective operation, even when gloves are worn. Simple and flexible operation for a wide range of applications: 8 x 15 mL angular rotor accommodates round bottom tubes or conical bottom tubes (only 4 conical bottom), including common blood tubes. Additionally, it can also be easily adapted with accessories to accommodate smaller tubes such as 7.5 and 1.5/2ml. TECHNICAL FEATURES Speed ​​range: 200 rpm – 6.800 rpm Maximum relative centrifugal force: 4.445 g Maximum flow rate (rotor): 8 x 15 ml Program memories: 99 Rotor Packaging: Angled Rotor: Rotore Angolare 8 x 15ml Acceleration gear: 10 Deceleration gear: 10 Lid lock: mechanical Noise level: ≤60 ± 2 dB (A) Rotor Compatibility: Angled 8 x 15 ml Rotor recognition method: manual Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous Safety certification: CE; FCC

This was removed from a university lab where it was surplus to requirements THe unit powers up but s (more)hows error 48 which is a door lock error. It seems like the door solenoid is not being sent a signal. It is sold for spares/repairs. No rotor included.

Beckman Coulter Rotor Type 50.2 Ti This item was removed from a university where it was surplus to r (more)equirement. It is in good cosmetic condition, we are unable to test it further at our facility. Features:- Type - 50.2 Ti - Max RPM - 50,000 - The Unit Has 12 x Slots For Vials - Only Use in Instruments Classified H, R, S

This ALC Multispeed Refrigerated Centrifuge PK 121 R was removed from a university lab where it was  (more)surplus to requirements. The unit is in reasonable cosmetic condition but has been previously used. The start button is damaged but still works. The unit powers on and has been tested. It spins up to 4100rpm, but the rotor is rated at 4300rpm. When set to its lowest which is -10 degrees it got down as low as -12. When set to its max which is 40 degrees it displayed 39 and was at 37. The Rotor number displayed T515.The Buckets Serial number is 0306/01.The buckets Cat Number is 11210335.The number on the bottom of the buckets is Ch. 007027 S.303.The bucket adaptors inside the buckets were numbered ALC R2035 & the Cat Number is 11172435. The ALC 2035 Adapter is for 50ml tubes.

Jouan BR4i Refrigerated Centrifuge with S40 Rotor The unit powers up and has been temperature tested (more), and speed tested rotor. It is in good working order. It is in good cosmetic condition with marks from use. Max RPM- 14000 1 x Juan rotor included: -Jouan S40 Bucket Rotor with 4 x buckets with lids (0897/24) Max RPM-4300

Beckman Avanti 30 Compact Centrifuge with F0850 Rotor & Manual This item was removed from a uni (more)versity lab where it was surplus to requirements. It is in good clean condition with minor marks around the display screen. The centrifuge powers on, with screen and controls functioning correctly. Temperature and RPM settings are operational, and are in good working order (thermometer not included). Specifications: - RPM Range: 0-30,000 RPM (max RPM with F0850 Rotor fitted: 16,500)\ - Time Range: 0-9 hours 59 minutes - Temperature Range: -20°C to 40°C Includes: - Beckman F0850 Rotor - Capacity: 8 x 50 ml - Max RPM: 16,500 - Rotor removal tool - Beckman Avanti 30 Compact Centrifuge Instruction Manual - Beckman Instructions for using F0850 fixed-angle rotor

Beckman L7-65 Refrigerated Centrifuge L7-65R This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and will run to 1500rpm, but it cannot create a sufficient vacuum to run at higher speeds. For this reason it is sold for spares/repairs.

This BECKMAN Model J2-21 Floor Standing Centrifuge was removed from a university lab where it was su (more)rplus to requirements. The unit is in full working order but is not supplied with a rotor. It is in reasonably good cosmetic condition but has cracks on the door hinge and latch.

Beckman Coulter Optima L-90K Ultracentrifuge This was removed from a university lab where it was sur (more)plus to requirements. The unit has been professionally serviced and is in good working order. A full report is available on request. It is in good cosmetic condition with minor marks.

Piramoon Technologies FiberLite F15-6x100 15,000rpm 24,700g Centrifuge Rotor This was removed from a (more) university lab where it was surplus to requirements. The item is in very good cosmetic condition and also includes its original carry case. Items features are as follows:15000rpm24,700 X G6x 100ml tube holdersQuick release autolock

Beckman Coulter Avanti J-25 Centrifuge This item was removed from a university laboratory where it w (more)as surplus to requirements. The centrifuge powers on and is in fair cosmetic condition. The condenser appears to be functional as the unit begins to cool, but a drive error is displayed on the centrifuge.Upon inspection, it was found that the motor had been disconnected, the front panel removed, and most wiring disconnected. This item is sold as-is for Spares/Repairs due to its current state. Specifications:- Serial No.: 270-728845-AA - Model No.: Avanti J-25

Beckman Coulter Bench-top Optima TLX Ultracentrifuge This was removed from a university lab where it (more) was surplus to requirements. The unit powers up but does not run. The door locking vacuum and temperature features work, but it does not spin. We tested it with a TL series rotor (not included). It is in good cosmetic condition, with marks from age & use.

Beckman Coulter Optima TLX Ultracentrifuge 120,000rpm This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up but half of the keypad no longer works. It is sold for spares/repairs.

This Beckman Coulter SW 32 Ti Swinging Bucket Rotor was removed from a university lab where it was s (more)urplus to requirements. The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used. Capacity: 6 x 100ml Max RPM: 32,000

This Beckman Centrifuge Model - JS-21 Cat no. 341737 was removed from a university lab where it was  (more)surplus to requirements. The unit powers up but has a fault with the shaft and bearings. It is sold for spares/repairs.

This Beckman Coulter FX6100 Fixed Angle Rotor 10200RPM was removed from a university lab where it wa (more)s surplus to requirements. The unit is in good cosmetic condition with minor marks from use but has not been tested. For use in Allegra X-12 series centrifuges. For 1000ml tubes.

Beckman Coulter Avanti J-HC Centrifuge This item was removed from a university lab where it was surp (more)lus to requirements. The centrifuge is in good cosmetic condition and powers on. However, due to an imbalance issue, no further testing could be conducted. The spindle is bent. Therefore, it is listed as Spares/Repair.

Lot Of Heraeus Centrifugal Rotor Buckets And Tube Holder Bucket Inserts Lab These items were removed (more) from a university lab where they were surplus to requirement. All items are in good cosmetic condition but have not been tested. The items included are as follows: - 4 x Heraeus #7570 E Rotor Buckets (max capacity of 600g) - 3 x Heraeus #8030 Rotor Buckets (max capacity of 510g) - 3 x Tube Holders For 15-25ml Tubes - 4 x Tube Holders 50ml Tubes

Piramoon Technologies FiberLite F15-6x100 15,000rpm 24,700g Centrifuge Rotor This was removed from  (more)a university lab where it was surplus to requirements. The item is in very good cosmetic condition and also includes its original carry case and Carbon Fiber Rotor Care Kit for this specific model. Items features are as follows:15000rpm24,700 X G6x 100ml tube holdersQuick release autolock

This Thermo Scientific FiberLite F12-6x500 LEX Fixed Angle Centrifuge Rotor was removed from a unive (more)rsity lab where it was surplus to requirements. The unit is in good cosmetic condition with only minor marks from use, though it has not been tested and will need to be inspected by a qualified engineer before it is used again. Specs;12,000rpm24,471 x gHolds: 6 X 500ml tube