Hermle Z327-K Refrigerated Centrifuge

This listing is for a Grant Instruments LMC-3000 CentrifugeThe Grant LMC-3000 is a low speed benchto (more)p centrifuge ideal for biomedical applications.

This listing is for a Thermo Scientific FiberLite F14-6x250y Centrifuge Rotor. The unit is in full  (more)working condition and is ready for immediate release. The Thermo Scientific FiberLite F14-6x250y Centrifuge Rotor is a robust and highly functional component designed for a variety of laboratory applications. Here is a comprehensive overview of its key features, specifications, and benefits: Key Features and Specifications Capacity: Accommodates 6 tubes with a volume of 250 mL each Maximum Speed: 10,000 rpm (up to 14,000 rpm for compatible centrifuge models) Maximum RCF: 15,316 x g (up to 30,100 x g for some compatible models) Rotor Angle: Fixed angle of 23° K Factor: 2737 Maximum Tube Dimensions: Length: Up to 125 mm Diameter: Up to 62 mm Radius (Metric): Minimum radius of 3.7 cm Biocontainment: Yes, designed for safe handling of samples Key Benefits Lightweight and Innovative Construction: Made from carbon fibre, allowing for rotor designs that are not feasible with traditional metal technologies. Durability: Corrosion and fatigue-resistant materials ensure the structural integrity of the rotor, promoting long-term reliability. Long Warranty: Backed by a 15-year warranty, providing confidence in the product’s quality and performance. Auto-Lock Rotor Exchange: Features a secure, push-button rotor exchange mechanism that allows for quick swapping of rotors in less than three seconds, streamlining the workflow in the laboratory. This centrifuge rotor is tailored for both research and clinical settings, offering unique advantages that enhance user experience and operational efficiency while delivering reliable performance.

Beckman Optima XL-100K Ultracentrifuge LabCAT no. 365669Serial no. COX97D02 This item was removed fr (more)om a university where it was surplus to requirement. It is in good cosmetic condition and in good working order when tested on-site, the previous client has also stated it was in working order prior to removal. There is no rotor included.

Sigma 3-16KL Centrifuge This item was removed from a university laboratory where it was surplus to r (more)equirements. The centrifuge is in very good used cosmetic condition, showing signs of general use. The rubber boot around the motor shaft is perished and torn due to age and wear, but this can be easily replaced and does not affect the unit's operation. Functionality: - Powers up and runs as intended. - Tested at -10ºC and 37ºC, with temperatures reached as expected. Included Accessories: - Bucket Adapters: - 4 x Sigma 17355 - 4 x Sigma 17356 - 4 x Sigma 17358 - 4 x Sigma 17359 - 4 x Sigma 17362 - 4 x Sigma 17377 - 4 x Sigma 17190 lids for the buckets Also included: - Instruction manual

Ohaus FC5916R Frontier Multi-Pro Refrigerated Centrifuge w/ Selectable Rotor Speed Range 200 to 16,0 (more)00 RPM Maximum Capacity 4 x 750ml Warranty 2 Year Manufacturer's Features - Automatic rotor identification makes switching between applications extremely easy - Simple one-hand operation enabled by the selection button/rotary knob combination—even with gloves on - Large backlit LCD display shows centrifugation settings and real-time parameters on one interface - Program storage up to 99 runs including parameter settings and rotor types - Maintenance-free induction drive - Thread-free rotor locking mechanism - Optimized airflow system to keep samples cool (non-refrigerated models) - Chemical and corrosion-resistant stainless-steel housing ensures durability in lab environments - Self-diagnostic program to record usage and error history for easy maintenance and to minimize downtime - Over-speed protection, immediately upon rotor insertion - Active imbalance-detection with individual imbalance tolerances set for each rotor - Motorized lid-locking system to protect operators from accidental injuries - Sealed and bio-containment rotors to safeguard operators from harmful aerosols Click Here to View Product Video The Ohaus Frontier 5000 Series Multi-Pro Centrifuges are designed for universal use in multiple applications in research, industrial, and clinical laboratories and can be combined with a range of rotors and accessories for customized use. These centrifuges are available in 7 models with capacities from 0.2ml to 4 × 750 ml - and feature high speed performance at maximum volume, automatic rotor identification and safety features. These multi-purpose centrifuges offer a high-speed centrifugation platform which can be customized to fit workflow needs using a wide variety of rotors and accessories. The intuitive design of the centrifuges & accessories enables easy access to parameter settings, and quick rotation between applications. The performance of these centrifuges is propelled by German engineering, and high-quality components for reliable use. Constructed of chemical-resistant stainless steel to ensure durability in lab use. The Frontier 5000 Series is equipped with protective features, including automatic overspeed protection, imbalance detection and self-diagnostic system to ensure reliable use and operator safety. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5916R Frontier Multi-Pro Refrigerated Centrifuge w/ Selectable Rotor includes: - FC5916R Frontier Multi-Pro Refrigerated Centrifuge - Selected Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Vacuubrand BVC 21 Pump Unit This item was removed from a university lab where it was surplus to requ (more)irements. The unit powers up and is in great cosmetic condition.

This Purite Select BIO40/BP/IT Water Purification System was removed from a university lab where it  (more)was surplus to requirements. The unit is in reasonable cosmetic condition but has some marks from use. It powers up and the screen is clear. It will likely need servicing before it is used again. The UV lamp hours are at 6000. The forecast change date is 14/12/23. Filter replacement was due 22/01/21. DI pack replacement was due 22/01/21. It has not been tested further.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.