Esco Class 2 BSC Airstream Safety Cabinet AC2-2E8 Lab

The EF is a class II biological safety cabinet. The EF offers the user the possibility to work safel (more)y with bioagents under sterile conditions via the work opening, without complete physical shielding of the experiment. Average downflow (in working position): 0.36 m/s ±0.05 Average downflow (in standby position): 0.10 – 0.20 m/s Average inflow at the top of the working opening (in working position): 0.28 m/s Average inflow through the entire working opening (in working position): > 0.5 m/s Air exhaust (in working position): 600 m³/h ± 25 Sound level: < 56 dB A Lighting: 2x TL-high output (white – No. 840) Lighting intensity: 1550 Lux UV lighting type: UV-C UV lighting wavelength: 253 nm Pre-filter: G3 (EN 779) (1760 x 445 mm) Downflow filter: Astrocell HEPA 18P6+ (H14 acc. EN 1822) (610 x 1830 x 69 mm) Emission filter: Astrocell HEPA 7P6 (H14 acc. EN 1822) (762 x 610 x 69 mm) Working opening in working position (HxW): 165 x 1800 mm Maximum working opening: 350 mm Working surface (WxD): 1719 x 440 mm Internal dimensions (WxDxH): 1800 x 605 x 725 mm Dimensions (WxDxH): 1943 x 844 x 1552 mm Height including base: 2297 mm Weight: 315 kg

This Labcaire Class II Biological Safety Cabinet&nbsp;Model - BH12 was removed from a university lab (more) where it was surplus to requirements. The unit powers up, and both the fans and the white lights are functioning. There is no UV light installed, and the socket tester is not included. It is in reasonably good cosmetic condition internally and externally. Inside dimensions - D63 W120 H70cm Hours - 1078 1.2

CAS BioMAT 2 Class 2 Microbiological Safety Cabinet Lab This was removed from a laboratory where it  (more)was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition, with some minor marks from use. Socket tester not included. Calibration date due: 29:02:2024. Internal Depth (cm) 106.0Internal Width (cm) 44.0Internal Height (cm) 51.0

BioMAT 2 Class 2 Microbiological Safety Cabinet CAS This was removed from a laboratory where it was  (more)surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition, with some minor marks from use. Socket tester not included. Calibration date due: 08:10:2021.

Thermo Scientific Safe 2020 Class 2 Safety Cabinet Type S2020 1.8 + Stand This was removed from a un (more)iversity lab where it was surplus to requirements. The unit powers up and is in full working order. This model is not fitted with a UV light. It is in good cosmetic condition with minor marks from use.

Envair Technology CDC F Negative Pressure Isolator Safety Cabinet Lab This item is sold on behalf of (more) a Client. It is surplus to requirement. It is in brand-new condition and remains in its original packaging. The serial number is WO9701.The date of manufacture is August 2022. This item is available for collection from Bath, UK, but we may be able to offer shipping for an additional fee. Further information regarding the product's key features is available on request. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

LAUDA Proline immersion thermostat The LAUDA Proline bridge thermostats with vario flex pump are exc (more)ellent for thermostating in any tank. The PB models have a pressure / suction pump and are used in tanks of 200 mm. While the PBDs are equipped with pumps with more powerful pressure and used in tanks of 320 mm deep. Also available are a telescopic rod for tubs with a width of 310 to 550 mm, an ergonomic handle and attachments for side pumps. The LAUDA Proline bridge thermostats are available with two different control panels. The Master version (PB, PBD) is designed for all applications where the parameters are not changed very often. Models with the removable Command operating unit (PB C; PBD C) offer a graphic LCD screen for high ease of use and optimum functionality. Notable features - PowerAdapt system for optimal adaptation of the max. Heat output. without interfering with the mains power supply - Low level protection and adjustable overtemperature protection with audible alarm. Levels measured with float Accessories included Fittings for pump connection, telescopic rod Specific characteristics of the Proline PB C model - For tanks of 200 mm deep - State-of-the-art Command control panel, removable, for remote use; LCD display with the most advanced feature set in the LAUDA range - Tank volume max. 80 L - Water-cooled temperature range from 20°C to 300°C - Operating temperature range from -30°C to 300°C - Pump connectors M16 x 1 - Fitting 13 Ø

Capacity: 1325 l Doors: 2 glass doors (double layer) Air circulation: forced air circulation by inne (more)r fan Defrost: fully automatic defrost cycle Temperature range: 1ºC to 8ºC (factory set on 4ºC) Temperature precision: ± 0.5ºC Temperature stability: ± 1ºC Temperature uniformity: ± 2ºC Microprocessor: adjustable set-point, high alarm, low alarm, door alarm (audible, visual and remote alarm) Cabinet material: stainless steel inside and outside Dimensions (WxDxH): 1420 x 800 x 1985 mm Internal dimensions (WxDxH): 1300 x 675 x 1380mm Shelves (WxD): 530 x 650 mm Weight: 245 kg

Thermo Neslab KMC 100 Rack Mount Chiller This item was removed from a laboratory where it was surplu (more)s to requirements. The item is in good cosmetic condition. It powers on, and the temperature control was successfully tested. Specifications: - Ambient temperature range: 15˚C to 35˚C - Temperature stability: +/- 1˚C - Pump capacity: 1 litre per minute at 26psi - Tank volume: 0.95 litres

The Agilent 1100 G1313A Autosampler is designed for the pharmaceutical routine tasks and quality con (more)trol, as well as for environmental and food analyses. The G1313A features reliable injections from 0.1 µL to 100 µL with easy adaption for injection volumes up to 1500 µL for applications ranging from microbore to semipreparative chromatography. The HP Agilent 1100 G1313A's low internal volume of 300 µL allows minimum contribution to a system's total internal volume. The system uses overlapped injections for increased productivity with sample capacities of 100 × 2-mL vials in a standard tray, 40 × 2-mL vials in a standard tray, or 15 × 6-mL vials in a half tray. Firmware A.07.02. Maintenance and current/recent verification, carried out by the Official Technical Service.

Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP2200eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP2200eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP2200eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V includes: - 6 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty