Clean Air EF/A6 Biological Safety Cabinet

The Esco Infinity Class II Biological Safety Cabinet (BSC), model FC2, offers superior protection to (more) the cabinet operator, product and the environment. With over 20 years of experience in safety cabinet technology, the Esco FC2 cabinet brings you the optimum combination of safety, performance and serviceability with an enhanced ergonomic design. Class II cabinets provide product, operator and environmental protection making them suitable for general microbiological work with agents assigned to biosafety levels 1, 2, and 3. With their diverse range of applications, class II cabinets are the most cost-effective systems on the market. The Infinity Class II BSC is designed, built and tested to comply with Australian Standard AS 2252.2 performance requirements and European Standard EN12469. External Dimensions (LxWxH): 1420 x 805 x 1535 mm Internal Work Zone (LxWxH): 1260 x 610 x 670 mm Tested Opening: 175 mm Inflow Initial setpoint: 1.10 m/s Downflow Initial setpoint: 0.41 m/s HEPA Filter Efficiency: >99.99% at 0.3µm Sound According to EN12469: <65 dBA Fluorescent Lighting: >1200 Lux, measured at work surface level (zero background) as per NSF49 test grid UV-interlock ensures that the UV lamp is deactivated when the sash is not fully closed. Main Body Construction: 1.2mm thick gauge electro-galvanised steel with Isocide anti-microbial white oven-baked epoxy-polyester powder-coated finish Net Weight: 298 kg

This Bigneat F3-XIT-D Powder Weighing and Handling Cabinet was removed from a university lab where i (more)t was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with some marks and paint chips/rust from use.

MAT Medical Air Technology BioMAT 2 Class 2 Microbiological Safety Cabinet This was removed from a u (more)niversity lab where it was surplus to requirements. The item powers on with airflow and UV light working, the white light doesn't work, but it may just be the bulb. It is in good cosmetic condition with some marks from use. Cabinet Dimensions - L120 W63 141cmFrame Dimensions - L112 W60 H84cmInternal workspace dimensions -&nbsp;D54 W106 H70cm

CAS BioMAT 2 Class 2 Microbiological Safety Cabinet Lab This was removed from a laboratory where it  (more)was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with some minor marks from use. Socket tester not included. Calibration date due: 28:02:2024. Filter details:Camfil MX14-1130X500X90.Size: 1130x500x90.Nominal Airflow: 915m3/h.Pressure Drop 92 Pa Efficiency 99.9993.Filter Class: H14 EN1822.Serial No: 111074-48187. Camfil MX14-800X320X66.Size: 800x320x66.Nominal Airflow: 415m3/h.Pressure Drop 125 Pa Efficiency 99.998.Filter Class: H14 EN1822.Serial No: 110617-46187.

Faster SafeFAST Classic 212 Class 2 Microbiological Safety Cabinet This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up and operates but the UV bulb will need replacing. It is in good cosmetic condition with minor marks. Operating time - 20252:04UV Hours - 4998:54

Integra Vacusafe aspiration system for cell culture with integrated pump with vacuum control, 4 L sa (more)fety coated glass bottle with lid with quick coupling, self-closing connectors, tubing setting and Vacuboy manual vacuum operator and tips. Hydrophobic filter for vacuum source protection. VACUSAFE is a compact laboratory aspiration system providing a safe and efficient way to collect and contain biological liquid waste. Vacuum systems are widely used for aspiration of liquids and their subsequent disposal. Protecting the vacuum source from contamination by liquids and aerosols with an overflow trap and a filter is not only good laboratory practice, but also imperative as a personal protection measure when working with biological, chemical or radioactive liquids.

Ohaus Scout STX222 portable scale, with plate Ø 120mm These balances are ideal for laboratory and in (more)dustrial applications. They feature an easy-to-navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They are also equipped with excellent overload protection and advanced connection options. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Dynamic / Animal Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3'' (109 mm) touchscreen display with VGA color graphics resolution and user-controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Structure ABS housing, stainless steel deck, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, safety slot, stabilizing feet, level indicator front illuminated Construction features Stability indicator, stackable design with storage cover included (except 1mg models), mechanical and software protection against overload and underload, battery life indicator, automatic shutdown, automatic tare, calibration mass provided on models with capacity higher than 620 gr. Integrated applications: - Weighing: determines the weight of the objects on the pan in the selected unit of measurement. - Piece Counting: Counts the number of pieces on the pan using a uniform weight. - Percent Weighing: Measures the weight of a sample displayed as a percentage of a preset weight reference. - Weight check: compares the weight of a sample with respect to the target limits. - Dynamic Weighing: Weighs an unstable sample load. The scale takes an average of weights over a period of time. - Totalization: measures the cumulative weight of multiple objects. The cumulative total can exceed the capacity of the balance. - Density determination: determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for objects that cannot be easily placed on the weighing pan. - Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. - Mole Weighing: Measures the weight of a sample and  calculate it into Moles automatically

Job Lot of STOE XRD Crystallography Parts Lab These items were removed from a university where they  (more)were surplus to requirement. All XRD items are in reasonably good cosmetic condition, none of them have been powered or tested. The PC has been powered on and has the following software installed:- Winxpow Software No password is required (press 'Cancel' when the computer asks for a password).This PC runs on Microsoft Windows 95. This item is also supplied with various keys and power cables.

This Struers LaboPol-1 Polishing Machine was removed from a university lab where it was surplus to r (more)equirements. The unit powers up and is in good working order. It is in reasonable cosmetic condition but is well used.

Applied Biosciences 7900 HT Fast Real-Time PCR Complete System Lab This item was removed from a univ (more)ersity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Includes:- 16A 1Phase cable

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Labconco RapidVapVacuum Evaporation System with RS-232 Link and Lid HeaterThe RapidVapVacuum Evapora (more)tion Systems are ideal for preparation of samples in a variety ofapplications including drug discovery, agrichemistry, mycology testing andenvironmental analysis. The systems use vacuum along with heat and vortexmotion to help speed evaporation and provide an alternative to traditionalcentrifugal evaporation methods. These systems may be used with a broad rangeof aggressive chemicals. Heat is supplied by a dry block heating system that,unlike water baths, adds no potential source of contamination and requires nomaintenance. The RapidVap Vacuum Evaporation Systems accommodate twelve different,interchangeable accessory sample blocks holding sample volumes from just a fewmilliliters to as large as 450 milliliters. As many as 110 each 12 or 13 mmtubes may be loaded at once. Additional blocks accommodate various tube typesincluding conical centrifuge tubes and scintillation vials. Contact Labconcoabout custom blocks to fit special glassware configurations such as VOA vials.INCLUDED: The Labconco 7900012 RapidVapVacuum Evaporation System with RS-232 Link and Lid Heater, 115V, 50/60Hz includes: - Vacuum Hose - Clamps x 2 - Heat Transfer Grease - RS232 Cable Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty