LabCaire TC 1200 Class II Safety Cabinet Lab

Dimensions (WxHxD): 1200 x 1970 x 600 mm No keys included

Large Safety Cabinet/Cupboard fitted with Gas Regulators This was removed from a university lab whe (more)re it was surplus to requirements. The unit is untested but in reasonably good cosmetic condition.

Esco Class 2 BSC Airstream Safety Cabinet Model AC2-2E8 This was removed from a university lab where (more) it was surplus to requirements. The unit powers up and is in full working order. It is in very good cosmetic condition with minor marks.

Kojair Class II SL-130 DEF Blue Series Safety Cabinet Lab This item was removed from a university la (more)b where it was surplus to requirements. The unit powers on and the fan, airflow, white light, and window up/down function properly. The unit requires an external UV lamp for the UV functions to work. It is not included with this system. It was last serviced in August '23. It is in good cosmetic condition with some minor marks from use. Height with base: 218cmHeight without base: 138cm Safe Working area 60 x 119cm Socket tester not icluded.

Thermo Scientific Safe 2020 Class 2 Safety Cabinet Type S2020 1.8 + Stand This was removed from a un (more)iversity lab where it was surplus to requirements. The unit powers up and is in full working order. This model is not fitted with a UV light. It is in good cosmetic condition with minor marks from use.

Thermo Fisher Safe 2020 1.8 Class 2 Biological Safety Cabinet Lab This item was removed from a unive (more)rsity lab where it was surplus to requirements. The unit powers on and the fan, airflow, white light, UV, and window up/down function properly. It is in good cosmetic condition with some minor marks from use. Safe Working area 78 x 180cm Unit height with stand: 226cm Included is Vacuubrand VHC PRO Vacuum Hand Controller as well as the stand. Socket tester not included.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Sensor: CMOS 1/2.3 inch Pixels: 4912 x 3684 pixels, 18.0 Mpix Scan mode: Pixel size: 1.25 μm x 1.25  (more)μm Colour filter: RGB Mounting: C-mount Image frequntion: – up to 6 shots per second (4912 x 3684 pixels) – up to 18 shots per second (2546 x 1842 pixels) – up to 32 shots per second (1228 x 922 pixels) Exposure: Automatic or manual White balance: Automatic/manual Dynamic range: 65 db S/N max: 42 db Data interface: USB 3.0 high speed 80 Mb/s Operating conditions: 0 – 50° C, 30-80 % humidity Storage temperature: -20 to 60° Celsius Power supply: 5V via PC USB port Housing: Zinc-aluminium alloy, 68 x 68 x 45 mm Supplied with: – 0.5x objective lens with C-ring – USB 3 cable – 30 and 30.5 mm to 23.2 mm tube adapters for stereo microscopes – 76 x 24 mm calibration slide (1mm/100) – CD ROM with ImageFocus Alpha software – cardboard box Software: Supplied with ImageFocus Alpha analysis software. Suitable for Windows 7, Windows 8 (32 and 64 bit configurations) System requirements: Intel Core 2, 2.8 GHZ or higher, 2 GB, USB-3

This variable speed shaker with a large platform is ideal for gentle mixing. This model is equipped  (more)with an LED display, while the speed and time are controlled via a knob. The oscillating wave motion is ideal for washing and blotting procedures. The non-slip mat keeps the containers in place. Digital setting and display of speed and time Can be used at 4 to 40 °C (80% relative humidity, non-condensing) in an incubator or cold room Continuous or timer operation: integrated digital timer for 1 s to 90 min. or for 1 min. to 9 h; with automatic switch-off and display of the remaining time BioCote antimicrobial protection Shaking motion: Rocking wave motion Speed ​​range: 5 – 70 rpm Angle: 7° (fixed) Plateau (WxD): 355 x 355 mm Maximum load: 10 kg Dimensions (WxDxH): 360 x 420 x 160 mm Weight: 10 kg

This Thermo Finnigan Trace GC System was removed from a university laboratory where it was surplus t (more)o requirements. All the units are in good, used cosmetic condition, and all power up. We were unable to test them further than this, however. The system comes supplied without a detector. The ECD one that was inside has been retained by the lab. The system consists of: 1 x Finnigan Trace GC Ultra With TriPlus AS Autosampler.1 x Thermo TP100 Sampler Supply It also comes with some spares and cables.

Excella E25 Incubator Shaker Series Lab This item was removed from a university where it was surplus (more) to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition.

Ohaus VXMNPS Digital Mini Pulsing Vortex Mixer, 120V Orbit 0.1 in (2.5 mm) Speed Range (On Mode) 50 (more)0 rpm to 3,000 rpm Control Pulsing / Digital Features - Pulsing control reduces heat generation while enhancing mixing efficiency and cell disruption - Independent LED displays for speed and time enable simultaneous monitoring of both settings - Touch arrows provide easy and intuitive control for all users regardless of experience level - Compact design with dimensions of 8.3 in x 6.5 in x 4.8 in and a net weight of 9.7 lb. ensuring ease of placement within a lab space - Includes a cup head and 3-inch accessory platform, with a stainless steel microtube holder for 12 tubes - TUV safety certified for reliable operation - A variety of additional accessories are available to ensure configurations tailored to your mixing needs The Ohaus VXMNPS Digital Mini Pulsing Vortex Mixer, 120V, is designed for precise and efficient mixing in laboratory settings. Featuring pulsing control, this model reduces heat generation while providing more effective mixing and cell disruption. The digital control system allows for exact speed adjustments from 500 to 3,000 rpm and time settings, ensuring repeatable results with every use. Separate LED displays for speed and time enable the operator to monitor both settings simultaneously, while touch arrows provide easy and intuitive control. This compact, 9.7 lb mixer is ideal for re-suspending liquids, mixing reagents, and other essential lab applications. INCLUDED: The Ohaus VXMNPS Digital Mini Pulsing Vortex Mixer, 120V includes: - Stainless Steel 12 Tube Microtube Holder - 3 in. Accessory Platform for Beakers, Flasks, and Tubes - Power Cord - Manufacturer's Documentation - 2 Year Manufacturer's Warranty