Dupa 1200 Fire Safety Cabinet

Labconco 3889203 Ventus Canopy Connection Kit for 6-Ft Class II Type A2 Logic+ Biosafety Cabinet The (more) Labconco 3889203 Ventus Canopy Connection Kit for 6-Ft Class II Type A2 Logic+ Biosafety Cabinet provides thimble ducting Class II, Type A2 Biosafety Cabinets. The canopy provides an air gap to allow room air to enter the ductwork and mix with the filtered air being exhausted to the outside. Inadequate exhaust activates the switch in less than one second and triggers the Class II, Type A2 biosafety cabinet to signal an audio and visual alarm via the LCD display. The motor also increases to maximum speed for personal safety during exhaust failure. The Labconco 3889203 Ventus Canopy Connection Kit for 6-Ft Class II Type A2 Logic+ Biosafety Cabinet adds only 1.25" to the overall height of the biosafety cabinet and is comprised of powder-coated steel. The outlet is 10" (25.4 cm) ID. An exhaust connection is required. A Damper (Catalog Number: 3776800) and Remote Blower (Catalog Number: 7068000 or 7068200) are recommended and are not included. INCLUDED: The Labconco 3889203 Ventus Canopy Connection Kit for 6-Ft Class II Type A2 Logic+ Biosafety Cabinet includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 332691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Scope-Ready, Serv (more)ice Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 332691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Scope-Ready, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 332691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Scope-Ready, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Labconco 322691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Lig (more)ht, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 322691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Light, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 322691101 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, UV Light, Service Fixtures, Vacu-Pass Portal, and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Maximum load per shelf: 75 kg Volume collection sump: 22 L Maximum volume of largest container: 20 L (more) External dimensions (WxDxH): 600 x 620 x 1980 mm Weight: 370 kg

The screen of the display, provide intuitive and practical colour codes which immediately show the c (more)abinet status: • Green screen: Cabinet in safe condition • Red screen: Cabinet out of specification • Yellow screen: Cabinet being decontaminated The main screen provides a visual display of the laminar flow speed and filter clogging. The Ecomode function allows the cabinet to run at low speed in one single click, in order to protect the sample while the operator is doing other tasks. This saves energy, reduces sound level and heat emission. Other features of the display: • Constant information on the air flow status: – Laminar flow speed – Extraction rate – Inflow speed • A timer to program the daily activation of fans and UV light • Two password levels (user and technical service) • Acoustic and visual alarms with an information message: – Excessive or insufficient laminar flow speed – Insufficient exhaust rate – Glass away from the working position – Open front window – UV lamp activated (interlocked with the front closed position) Laminar flow speed: 0.35 m/s Laminar flow rate: 1310 m3/h Front entry air speed: 0.5 m/s Extraction flow rate: 564 m3/h Lighting: > 1000 Lux Sound: < 58 dBA Vibration: < 0.005 mm RMS. Filters: HEPA/ULPA H14 filters. Digital display with PIN password for menu settings box. 2 electrical connections left/right. Dimensions (WxDxH): 1964 x 759 x 1260 mm Internal dimensions (WxDxH): 1869 x 602 x 580 mm Support frame height: 900 mm Weight: 280 kg

11175712 Lids for THERMO T41 Laboratory Centrifuge Buckets Set of 4

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - 7” touchscreen with (more) easily accessible temperature display in the door handle - Minimal ice formation allowing for easy defrosting - NFC card/password protected door lock mechanism - USB port and SD card slot for easy export of -41°C setpoint data - Modular internal equipment - Easy access to lower drawers - High quality stainless steel and other materials for durability Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Intelligent automatic defrost technology that allows for a stable temperature during the defrost cycle - Automatic shutdown of the evaporator fans each time the door is opened to reduce heat transmission - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Insulated interior doors, sealed gaskets, improved frame to minimize cold air loss and heat conduction - Frost prevention which reduces the pressure on the compressor - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical sheet in Italian or in English for all the details.