CAS BioMAT Class 2 Microbiological Safety Cabinets

The biohazard cabinet of Clean Air type EF/A4 is designed for microbiological research with biologic (more)al agents, such as bacteria, viruses and allergens. Thus, this biohazard cabinet is suitable, inter alia, for culturing cells and for transfecting cells under sterile conditions. The Clean Air EF/A4 generates a sterile air flow in the cabinet, keeping the material of the cabinet free from contamination and contamination (product protection). In addition, the downflow provides reasonable protection against cross-contamination of experiments. Furthermore, the intake of air from the laboratory room ensures that an inwardly directed protective air curtain is formed at the front of the cabinet, which serves as a personal protection. Downflow HEPA filter (EN 1822): 12P6 + Exhaust HEPA filter (EN 1822): 4P4 UV wave length: 253 nm Dimensions prefilter: 445 x 1150 mm Interior dimensions (WxDxH): 1200 x 575 x 750 mm Dimensions (WxDxH): 1330 x 835 x 1550 mm Frame height: 750 mm Weight: 200 kg

This BIOAIR Safeflow 2 Class 2 Biological Safety Cabinet was removed from a university lab where it  (more)was surplus to requirements. The unit powers up, but an Unsafe message appears on the screen. "Incorrect laminar flow & CPU alive." There is a black line through the screen. It may just need a service to rectify the issue, but we cannot guarantee this. It is in good cosmetic condition with minor marks from use. Internal dimensions are: L114cm x W40cm x H66cm.

This FASTER BH-EN 2004-D Class II Biological Safety Cabinet was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in working order. It is in good cosmetic condition with minor marks from use. Internal Dimensions are W 119cm x D 59cm x H 73cm.

This Labcaire Class II Biological Safety Cabinet Model - BH12 was removed from a university lab (more) where it was surplus to requirements. It was last used 3 years ago and the lab were confident it was working. The unit powers up and both the fans and the white lights are working. There is no UV light fitted. It is in reasonably good cosmetic condition but the metal cover for the bottom is missing its latches and won't quite fit. Inside dimensions - D62.5 W120 H70cm Hours - 14001.4

CAS BioMAT 2 Class 2 Microbiological Safety Cabinet Lab This was removed from a laboratory where it  (more)was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition, with some minor marks from use. Socket tester not included. Calibration date due: 29:02:2024. Internal Depth (cm) 106.0Internal Width (cm) 44.0Internal Height (cm) 51.0

BioMAT 2 Class 2 Microbiological Safety Cabinet CAS This was removed from a laboratory where it was  (more)surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition, with some minor marks from use. Socket tester not included. Calibration date due: 08:10:2021.

Heating thermostat from 20 to 100°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - Transparent polycarbonate bath up to 100°C - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Graph of heating performance of ECO Silver immersion thermostats with polycarbonate bath. Performance graph of the pump pressing on the six levels.

This Agilent Technologies 1200 Series HPLC G1312B Binary Pump was removed from a university lab wher (more)e it was surplus to requirements. The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel. We are unable to test this item further at our facility. Power supply included.

Yamato WC-301UVB Auto Pure Benchtop Type 1 Water Purification System with UV Oxidation Lamp, 120V Co (more)nfiguration Benchtop Flow Rate (Typical) 2.5L/min (0.67 gpm) Resistivity 18.2 MΩ-cm Features - 2.5 LPM of 18 MΩ Type 1 reagent water on demand - Low-cost of ownership - Intuitive, user-friendly touch screen interface - Large capacity, low cost consumable cartridges - Replacement cartridges are fresh and made in the USA with a 1 year shelf life - Compact design - Real time quality monitoring with leak detection - Quick change, cartridge – no tools needed - Premium quality ion exchange resin Compact design, benchtop or wall mount water purification system in 120V with UV oxidation lamp that produces Type 1 deionized water. Low cost of ownership. Water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals, and ultraviolet light for bacteria sterilization and TOC reduction. As water exits the system, a final filter removes particulates and bacteria to reach Type 1 water specifications. INCLUDED: The Yamato WC-301UVB Auto Pure Benchtop Type 1 Water Purification System with UV Oxidation Lamp, 120V includes: - Drain fitting – ¼ MNPT x HB - 6 Feet of 3/8” OD Tube for Inlet - 6 Feet of 3/8” Hose for Drain Connection - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

M1 Mass Standard - knob weights - set (1 mg - 200 g), plastic box.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.