Yamato LR-500B Overhead Stirrer with 75mm 4-Blade Propeller, 115V

Yamato LT-400B Overhead Stirrer, 100-120V Speed Range 115~600rpm Max Torque 0.5N•m (5.0kgf•cm) Moto (more)r DC Brushless Motor 30W Features - Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir - Maintenance free DC brushless motor - Digital speed indicator for accurate speed setting and confirmation - Noise prevention measures for optimal work environment - More safety-oriented design Laboratory stirrer with well-blanced speed and torque for medium viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. Speed range 15~600 rpm. INCLUDED: The Yamato LT-400B Overhead Stirrer, 100-120V includes: - Clamp - Safety Cover - Chuck Handle - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA RW 28 Digital Mechanical Overhead Stirrer Speed Range 60 to 1,400 RPM Viscosity Max. 50,000 mPas (more) Stirring Quantity Max. 80 l Features - Digital speed display - Infinitely adjustable speed from 60 to 1400 rpm in twospeed ranges - Push-through agitator shafts - Overload protection - Error code display - Robust, ergonomic design - Quiet operation - With constant power-drive Powerful, mechanically controlled laboratory stirrerdesigned for highly viscous applications for quantities up to 80 l (H2O). It issuitable for intensive mixing for use in laboratories and pilot plants. Thestirrer comes equipped with a protection for overheating of the motor by meansof self-locking temperature limiter. Additionally, to secure bowls, a stirringshaft protection and clamping fixture are optionally available.

IKA Eurostar 400 Digital Overhead Stirrer Speed Range 0/6 to 2,000 RPM Viscosity Max. 100,000 mPas (more) Stirring Quantity Max. 150 l Features - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Powerful laboratory stirrer for high viscous applications and intensive mixing for quantities up to 150 l (H2O). It automatically adjusts the speed within the range of 0/6 – 2000 rpm (two speed ranges) through microprocessor controlled technology. Integrated safety circuits ensure automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft to desired speed is performed and variations are adjusted automatically. This ensures constant speed even with changes in viscosities of the sample.

Heidolph Overhead Stirrer Visco Jet Impeller inoJET-80mm Particularly in the case of applications wi (more)th very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers! The particular shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. You can find out more about this here. The VISCO JET® 80 is ideal for vessels with the following characteristics: - ideal vessel diameter: 133- 200 mm - ideal ground clearance: 24 mm - ideal filling level: 133- 200 mm - ideal volume: 1,900 - 6,300 ml The VISCO JET® 80 is made of stainless steel. A stirrer shaft with a diameter of 10 mm is included in the scope of delivery. INCLUDED: The Heidolph Overhead Stirrer Visco Jet Impeller inoJET-80mm includes: - Operator's Guide - Full 3 Year Manufacturer's Warranty

Heidolph 036300400 Overhead Stirrer Impeller, PR 30 Pitched-Blade Due to its blade dimensions, the p (more)itched-blade impeller PR 30 is ideal for solutions, emulsions and suspensions in vessels with the following characteristics: ideal vessel diameter: 145-290 mm, ideal ground clearance: 29-58 mm, ideal filling level: 145-290 mm, and ideal volume: 2,400-19,200 ml. The pitched-blade impeller PR 30 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300400 Overhead Stirrer Impeller, PR 30 Pitched-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heidolph 036300390 Overhead Stirrer Impeller, TR 21 Radial Flow Due to the jagged shape of the stirr (more)er blade, the radial flow impeller TR 21 is ideally suited for the construction of emulsions and the gassing or foaming of liquids in vessels with the following characteristics: ideal vessel diameter: 143-250 mm, ideal ground clearance: 25-50 mm, ideal filling level: 143-250 mm, and ideal volume: 2,300-12,300 ml. The radial-flow impeller TR 21 has a total length of 400 mm and is made of stainless steel. Its stirrer shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300390 Overhead Stirrer Impeller, TR 21 Radial Flow includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Jouan EB115 EL TS SN Incubator This was removed from a university lab where it was surplus to requir (more)ements. The unit powers up and has been tested with a temperature probe (not included). It is in good working order and cosmetic condition with minor surface damage present.

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab This item was removed from  (more)a university where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included).It has been professionally serviced, the report is available on request. It is in very good cosmetic condition internally and externally. This item includes the following: 3 x Shelves: 47 x 45 cm 1 x Humidity Water Tray: 44 x 25 x 7 cm

Yamato SK-401-115V Natural Convection Dry Sterilizer 99L, 115V Internal Capacity 99L Temperature Ran (more)ge Ambient +5-260°C Temperature Accuracy ±1°C (at 260°C) Features - Programmable - High precision controller with improved display visibility and operability - Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information - Maximum 99 steps, 99 patterns, repeat operation - Easy sample data collection with cable port - Standard equipped with self diagnostic functions, independent overheat prevention device and earth leakage breaker Programmable natural convection 99L dry heat sterilizer with independent overheat prevention device. High precision controller with improved display visibility and operability. Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information. Maximum 99 steps, 99 patterns, repeat operation. Easy sample data collection with cable port. Temp setting range ambient +5~260°C.INCLUDED: The Yamato SK-401-115V Natural Convection Dry Sterilizer 99L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Labconco 700401000 FreeZone 4.5L -50C Complete Freeze Dryer System Features - Patented moisture sens (more)orprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco FreeZone 4.5L -50 C Complete Freeze Dryer System includes the Labconco 700401000 FreeZone 4.5L -50C Benchtop Freeze Dryer with stainless steel coil and collector, Labconco 7522800 12-Port Drying chamber, and an Edwards RV5 Vacuum Pump. Labconco 700401000 FreeZone 4.5L -50C Benchtop Freeze Dryer with stainless steel coil and collector is designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. The upright stainless steel collector coil holds 4.5 liters of ice before defrosting. A single 1/3 hp HCFC/CFC-free refrigeration system cools the collector to -50C (-58F), suitable for aqueous samples. The Labconco 7522800 12-Port Drying chamber includes 12 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 1/2" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. Drying Chambers provide a means to attach flasks to your freeze dryer or contain samples in bulk. The Edwards RV5 rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco FreeZone 4.5L -50C Complete Freeze Dryer System includes: - Labconco 700401000 FreeZone 4.5L -50°C Benchtop Freeze Dryer with Stainless Steel Coil and Collector - Labconco 7522800 12-Port Drying chamber - Edwards RV5 Vacuum Pump - All Vacuum Tubing - Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty