Nuaire NU-440-400E Biological Safety Cabinet

This BIOAIR Safeflow 2 Class 2 Biological Safety Cabinet was removed from a university lab where it  (more)was surplus to requirements. The unit powers up, but an Unsafe message appears on the screen. "Incorrect laminar flow & CPU alive." There is a black line through the screen. It may just need a service to rectify the issue, but we cannot guarantee this. It is in good cosmetic condition with minor marks from use. Internal dimensions are: L114cm x W40cm x H66cm.

This FASTER BH-EN 2004-D Class II Biological Safety Cabinet was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in working order. It is in good cosmetic condition with minor marks from use. Internal Dimensions are W 119cm x D 59cm x H 73cm.

This Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E  Series 6 was removed from a (more) university lab where it was surplus to requirements. The item powers on with blowers and both Light & UV working. The blower will only work when the sash is at the correct working height. This is marked on the side of the unit. When it is dropped fully the blower switches off as it should. When it is raised above the mark the windows alarm goes off as it should, until the sash is dropped back to the correct working height. The unit starts up as it should and shows 'low' airflow initially until it builds up to the correct flow. It then raises above the correct flow and the 'HI' alarm sounds. We spoke to a service engineer and they suggested that it will just require calibrating upon installation. It will need commissioning upon installation anyway. The lab reported that the filter has been removed. Inside dimensions - D57.5 W118 H72cm

BioMAT 2 Class 2 Microbiological Safety Cabinet CAS This was removed from a laboratory where it was  (more)surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition, with some minor marks from use. Socket tester not included. Calibration date due: 08:10:2021.

Thermo Fisher Safe 2020 1.2 Class 2 Biological Safety Cabinet This item was removed from a universit (more)y lab where it was surplus to requirements. The unit powers on and the fan, airflow, white light, UV and window up/down function properly. It was last serviced in April 2024. It is in good cosmetic condition with some minor marks from use. Safe Working area 64 x 120cm Includes:-Manual-Stand for unit Socket tester not included.

Integra Vacusafe aspiration system for cell culture with integrated pump with vacuum control, 4 L sa (more)fety coated glass bottle with lid with quick coupling, self-closing connectors, tubing setting and Vacuboy manual vacuum operator and tips. Hydrophobic filter for vacuum source protection. VACUSAFE is a compact laboratory aspiration system providing a safe and efficient way to collect and contain biological liquid waste. Vacuum systems are widely used for aspiration of liquids and their subsequent disposal. Protecting the vacuum source from contamination by liquids and aerosols with an overflow trap and a filter is not only good laboratory practice, but also imperative as a personal protection measure when working with biological, chemical or radioactive liquids.

This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and i (more)s ready for immidate realese. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centers or plants. Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Perkin Elmer AAnalyst 700 Atomic Absorption Spectrometer This was removed from a university lab wher (more)e it was surplus to requirements. The unit powered up but something blew in testing. It is sold for spares/repairs. It no longer powers up. Included with it are; Perkin Elmer AAnalyst 700 Atomic Absorption Spectrometer 1x Dell OptiPlex GX110 PCS/N: JHK800JThis item is in a reasonably good cosmetic condition and powered on without issue - with WinLab32 Instrument Control and Data Management software. 1x Viglen TS700 MonitorS/N: TS7000523Q000200 1x Microsoft Mouse 1x Dell Keyboard 1x Starrett DigiTape Plus Computer cable 1x Perkin Elmer Burner Element 1x Perkin Elmer Folder -Flame Atomic Absorption with WinLab32 AA Software Course 14x Perkin Elmer Text books -Concepts, Instrumentation and Techniques in Atomic Absorption Spectrophotometry 1x 240 mark 2 Atomic Absorption Spectrophotometer Operating Instructions 1x Folder of Declaration of Conformity Certificates 1x Guide to Atomic Spectroscopy Techniques and Applications 1x Perkin Elmer Folder Introduction to Methods 1x Perkin Elmer Folder&nbsp;Atomic Absorption -Graphite Furnace Atomic Absorption with WinLab32 AA Software Course 1x AA WinLab Analysis Systems Troubleshooting 1x Perkin Elmer Atomic Absorption Spectroscopy Analytical Methods 1x Perkin Elmer HGA Graphite Furnace User's Guide 1x Perkin Elmer AAnalyst 700 Atomic Absorption Spectroscopy User's Guide 1x Perkin Elmer Burner System User's Guide 1x Dell OptiPlex GX110 PCS/N: JHK800JThis item is in a reasonably good cosmetic condition and powered on without issue - with WinLab32 Instrument Control and Data Management software. 1x Viglen TS700 MonitorS/N: TS7000523Q000200 1x Microsoft Mouse 1x Dell Keyboard 1x Starrett DigiTape Plus Computer cable 1x Perkin Elmer Burner Element 1x Perkin Elmer Folder -Flame Atomic Absorption with WinLab32 AA Software Course 14x Perkin Elmer Text books -Concepts, Instrumentation and Techniques in Atomic Absorption Spectrophotometry 1x 240 mark 2 Atomic Absorption Spectrophotometer Operating Instructions 1x Folder of Declaration of Conformity Certificates 1x Guide to Atomic Spectroscopy Techniques and Applications 1x Perkin Elmer Folder Introduction to Methods 1x Perkin Elmer Folder&nbsp;Atomic Absorption -Graphite Furnace Atomic Absorption with WinLab32 AA Software Course 1x AA WinLab Analysis Systems Troubleshooting 1x Perkin Elmer Atomic Absorption Spectroscopy Analytical Methods 1x Perkin Elmer HGA Graphite Furnace User's Guide 1x Perkin Elmer AAnalyst 700 Atomic Absorption Spectroscopy User's Guide 1x Perkin Elmer Burner System User's Guide

Tecan Fluent 780 Robotic Liquid Handler Year 2021 This item was removed from a university where it w (more)as surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility. The lab informed us the system was in good working order prior to removal. The software is not included. Product Details:Model: Instrument Fluent 780Serial No. 2108001479REF 30042021 00Eight injector head40 x plate holders Includes the following: 1 x Winmate R12L100-PCM2 monitor 30cm viewing, serial No. 2420BW0231461 x Power supply unit 30059387,&nbsp;serial No. 219266752 x USB cables1 x HP mouse

Memmert IPP110eco Peltier-Cooled Forced Circulation Incubator 108L, 115V Setting Temperature Range  (more)Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 108 L (3.8 cu.ft.) Features - 108 L volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Refrigerant-free design with Peltier cooling for maximum energy efficiency and environmentally friendly operation - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert IPP110eco Peltier-Cooled Forced Circulation Incubator 108L, 115V is designed for laboratories that prioritize both precision and sustainability. With a setting temperature range from 0°C to +70°C and a 108-liter capacity, this incubator ensures consistent and versatile temperature control for a wide range of applications. The energy-efficient Peltier heating and cooling system, combined with the ControlCOCKPIT digital controller and high-definition TFT-color display, provides seamless operation. The SetpointWAIT function ensures that processes only begin once the set temperature is reached, maximizing precision, while the three freely selectable calibration points further enhance accuracy. This environmentally friendly incubator features a refrigerant-free design, making it a sustainable choice for laboratories. The durable, corrosion-resistant stainless steel interior and textured stainless steel casing are built to last, ensuring long-term reliability. With a maximum chamber load of 330 lbs and support for up to five shelves, the IPP110eco accommodates large or multiple samples with ease. Safety is enhanced by an adjustable electronic overtemperature monitor and mechanical temperature limiter, while the autodiagnostic system provides fault analysis to ensure smooth operation. This incubator offers a perfect blend of precision, energy efficiency, and eco-conscious design. INCLUDED: The Memmert IPP110eco Peltier-Cooled Forced Circulation Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Tuttnauer 2340M AutoclaveFeatures - Automatic shut off at the end of both the sterilization and dry (more) cycles. - A long life electro polished Stainless Steel chamber and door. - Double safety locking device prevents door from opening while chamber is pressurized. - Drain valve is located on the front, allowing for quick and easy draining of water reservoir. - Dual safety thermostat to protect against overheating. - International certifications. - 1 year parts and labor warranty. 10 year chamber warranty With the operator in mind, the colorful control panel is both intuitive and easy to use. Control panel includes a pressure gauge, timer, thermostat, and function selector. Tuttnauer manual autoclaves will compliment any healthcare facility and satisfy all of your sterilization needs. With a small foot print of only 545 x 510 x 365mm this autoclave is both efficient and compact. The internal chamber has a volume of 5 gallons (19 liters) and can fit three stainless steel trays. The long-life elecro polished chamber and door are made to last. The Tuttnauer 2340M Autoclave is designed to compliment any healthcare facility. The bright new easy-to-use panel was designed with the operator in mind. The 2340M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. Standard unwrapped cycle Hot start: 13 min., Cold Start 27 min. Cycle times are approximate and may vary depending on instrument loads. INCLUDED: The Tuttnauer 2340M Autoclave includes: - 3 Stainless Steel Trays - Tray Holder - Base Plate - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Accuris Precision Balance, 500 Grams Accuris Precision balances quickly and accurately display sampl (more)e measurements on a large, backlit LCD screen. Utilizing highly precise, gold plated ceramic capacitance sensors, these balances tare and stabilize quickly and provide reliable weight measurements within 0.001 grams. Six models are available in the Precision Balance range, covering a wide range of maximum capacity requirements. The smaller capacity models (120g, 320g, and 500g) include a glass draft shield with 3 sliding doors for easy access the weighing chamber. These models offer readability to .001g (1mg). All models feature a control panel with a large, bright back-lit LCD screen that is easy to use and easy to see. The advanced software includes weighing modes for standard weighing, piece counting, percent deviation and also check weighing for component inspection. INCLUDED: The Accuris Precision Balance, 500 Grams includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty