Zenith DNP-9162A Incubator

Basic incubator for small laboratories. Despite the natural ventilation, the temperature accuracy is (more) +/-0.5°C @37°C. The most important accessories such as the  Plexiglass windows door and the 3.1 safety class (DIN), the hole for inserting a control sensor and the PID microprocessor are standard! - Inner chamber in aluminum for better heat transport.

Heating block for 1.5/2.0 ml tubes at fixed temperatures of 60°C and 95°C.

Edmund Bühler TiMix shaker equipped with a TH 10 incubator hood. Temperature range: 5°C above ambien (more)t to 50°C Temperature accuracy: ± 1% of the set value Motion: orbital Shaking platform: 400 x 300 mm for 8 microplates Max. load: 5 kg Shaking speed: 100 – 1400 rpm, steplessly adjustable Stroke: 3 mm Timer: 0 – 120 min / continuous Internal dimensions (WxDxH): 90 x 410 x 310 mm Dimensions (WxDxH): 510 x 490 x 555 mm Weight: 40 kg

Recovery time after 30 seconds door open at 37°C: 5 min Temperature fluctuation at 37°C: ±0.1K Tempe (more)rature range: 7°C above ambient temperature to 60°C Temperature variation at 37 °C: ±0.4 K Auto-sterilization with hot air at 180°C Humidity range: 90 to 95% RH Double-pan humidification system with condensation protection CO₂ measurement: IR CO₂ range: 0 to 20 Vol.-% CO₂ CO₂ Recovery time after 30 seconds door open at 5 Vol.-% CO₂: 5 min Dimensions (H x W x D): 1070 x 740 x 715 mm Internal dimensions (H x W x D): 750 x 560 x 500 mm Capacity: 210 litre Weight: 129 kg

Temperature range: 4°C to 50°C Digitally adjustable and digitally readable per 0.1°C Equipped with w (more)eek clock Dimensions (WxDxH): 760 x 820 x 2030 mm Internal dimensions (WxDxH): 530 x 650 x 1450 mm

The first hot plate stirrer with embedded Wi-Fi technology Wherever you are, VELP Ermes allows the r (more)eduction of routine operations thanks to the real-time control of your AREX-6 Connect PRO. Access your analyzes from PC, Pad or smartphone, to maximize the productivity and reproducibility of your reactions. Immediate notifications and alerts will allow you to always be informed and thanks to the remote interruption you will have total control of your processes. SAFETY FIRST AREX-6 Digital PRO is equipped with 2 independent temperature reading circuits that protect the instrument in the event of a malfunction of one of the two. If the probe is not inserted into the sample being analyzed, the instrument stops heating, showing a safety message on the display. AREX-6 Digital PRO is equipped with the most advanced technology and allows you to set the maximum temperature limit required for analyzes with specific temperatures. The Lock function prevents inadvertent changes to settings by locking the instrument. CerAlTop™, High Resistance The CerAlTop™ plate, made of aluminum alloy covered with a ceramic layer, guarantees a homogeneous and fast heat transfer over the entire surface. Furthermore, the thin ceramic layer protects the straightener from scratches and chemicals. CUTTING-EDGE THERMOREGULATION AREX-6 Digital PRO offers the best thermoregulation available. The PID thermoregulation system guarantees stable, fast temperature control with minimal overshoot. VTF and Pt100 probe allow accurate and precise temperature control. It is possible to choose between 2 different thermoregulation modes: - FAST: The set temperature is reached quickly. - FINE: The set temperature is reached slowly, minimizing overshoot. UNPRECEDENTED PERFORMANCE The brushless motor allows you to shake up to 20 liters at an adjustable speed from 30 to 1700 rpm. Thanks to the SpeedServo™ system, the speed is kept constant even when the viscosity varies. The Alnico magnet guarantees homogeneous agitation, even in the peripheral areas of the plate and a powerful magnetic coupling between motor and stir bar, a very important aspect when using accessories. MAXIMUM INSTRUMENT PROTECTION AREX-6 Digital PRO is an IP42 product designed to guarantee years of use and resistance in the laboratory. The structure and materials protect the internal parts of the instrument from possible damage. AREX-6 Digital PRO is guaranteed for 3 years. The silicone cover ensures further protection of the instrument from possible spills or splashes. Technical characteristics - Speed ​​regulation precision: 5 rpm. - Temperature regulation resolution: 1°C. - Connection for digital thermoregulators: VTF / VTF EVO. - Probe connection: Pt100. - Sample thermoregulation: ±0.5°C (VTF / VTF EVO) ±1°C (PT100). - Automatic reverse rotation: yes. - Probe detector: yes. - Lock function: yes. - Hot surface warning: on display. - Heating activation button: yes. NEW INTERFACE - EASY USE Bright LED display and intuitive icons. The icons will show you: probe or thermoregulator connection, heating activation, reaching the set temperature, timer activation and rotation reversal. The speed and temperature are set by the sensitive knobs, and are activated only after they are pressed. AREX-6 Digital PRO is equipped with an advanced menu that allows you to configure the instrument with the features that best suit the needs of the individual laboratory. INTEGRATED TIMER AND ROTATION REVERSE The central button allows you to set the timer from 1min to 99h59min. You can set the timer in 2 different modes: - Snap: The timer starts counting down as soon as a function is activated (stirring or heating). - SetP: The timer starts counting down as soon as the set temperature is reached. Furthermore, it is possible to set the rotation reversal at time intervals. CONNECTION TO THE ERMES CLOUD via WIFI Watch the videos to understand all the great possibilities of a latest generation laboratory, connected to Velp's Ermes cloud. VELP ERMES: FROM USER WORK MANAGEMENT TO DATA-RICH PROCESSES AREX-6 Connect PRO has built-in Wi-Fi technology to connect to the VELP Ermes cloud platform, the perfect solution for your Smart Lab. VELP Ermes allows the reduction of daily manual activities and repetitive operations thanks to real-time monitoring and control of your AREX-6 Connect PRO. Simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analysis data and share reports with your colleagues; receive immediate notifications of events and alarms remotely; record data and insights to improve productivity and reproducibility. Connecting your AREX-6 Connect PRO will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of support from VELP authorized service centers. ACCESSORIES OIL BATH AND HEATING MANTELS REPLACED WITH SPHERICAL CAPS The new Spherical Caps are the perfect solution for replacing oil baths and heating mantles. Furthermore, they adapt perfectly to both the 135 mm plate diameter and the shape of the tubes allowing a fast heat transfer from the plate to the tube. To increase protection and reduce thermal dispersion, VELP has designed the new PTFE Covers. GREATER VERSATILITY The MultiAlublock™ and the new MonoAlublock™ made of aluminium, are ideal for carrying out numerous stirring and heating analyses, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, it is possible to choose the mix that best suits your needs.

The UV-1800 is an advanced high-resolution spectrophotometer utilizing a precision Czerny-Turner opt (more)ical system. Operation can be either as a stand-alone instrument or as a PC-controlled instrument with the included UV Probe software. USB memory can be connected directly to the UV-1800 for simple data transfer and printing is possible with the optional screen-copy printer or printers that support PCL control codes. Photometric Mode measures the absorbance or transmittance at a single wavelength or at multiple (up to eight) wavelengths. In multiple-wavelength measurement, calculations can be performed on the data obtained for up to four wavelengths, including the calculation of the difference between, or ratio of, the measurements obtained for two wavelengths. Spectrum Mode obtains sample spectra using wavelength scanning. Changes in the sample can be tracked using repeated scans. Data processing operations, such as the enlargement or reduction of the spectra obtained, peak detection, and area calculations, are also possible. Quantitation Mode generates a calibration curve from standard samples, and uses it to calculate the concentrations of unknown samples. Various combinations of wavelengths (1 to 3 wavelengths and derivatives) and calibration curves (K-factor and first-to-third order regression calibration curves) are possible. Kinetics Mode measures the change in absorbance as a function of time, and calculates enzymatic activity values. You can select either the kinetics measurement method or the rate measurement method. Time-Scan Mode measures the change in absorbance, transmittance, or energy as a function of time. Multi-Component Quantitation Mode separately quantitates up to eight components mixed in a single sample. Pure components or mixtures of components can be used as standard samples. Biomethod Mode is capable of analyzing DNA and proteins using the several common quantitation methods including quantitation of DNA or protein using the absorbance at 260/230 nm or 260/280 nm and protein quantitation via the Lowry method, BCA method, CBB method, Biuret method, and UV absorption method (direct measurement at 280 nm). Security and validation functionality are also preprogrammed. Security functions allow you to restrict functions according to three user levels: administrator, developer, and operator. Automatic or semiautomatic validation functions include wavelength accuracy, wavelength repeatability, resolution, stray light, photometric accuracy, photometric repeatability, baseline flatness, baseline stability, and noise level. The operating time of the lamps can be recorded and displayed so that you can anticipate replacement and avoid downtime. Stray Light: <0.02%T at 340 nm, 400 nm; <1.0%T at 198 nm Source Lamp: Deuterium; Tungsten-Halogen Beam Type: Double Bandwidth: 1.0 nm Min Wavelength: 190 nm Max Wavelength: 1100 nm Wavelength Accuracy: ±0.1 nm Wavelength Reproducibility: ±0.1 nm Min Photometric – Transmittance: 0%T Max Photometric – Transmittance: 400%T Min Photometric – Absorbance: -4 A Max Photometric – Absorbance: 4 A Photometric Drift: <0.0003 A/hr Detector: Silicon photodiode Including UV Probe software

LABORATORY INCUBATORS ILW SMART POL-EKO ILW - POWERFUL, FOR MICROBIOLOGICAL TESTS ILW incubators are (more) perfect for the stable and safe incubation of samples, in any working environment. They maintain a constant temperature from 0°C to 70°C (It's necessary to purchase automatic defrosting function, ILW PLUS, for all units operating at set point <=5°C to prevent icing). The version capable of reaching -10 °C is available as an option, while with the SMART PRO version you can expand the heating range up to +100 °C. More! Large touch display, alarms, lock, easy to clean stainless steel interiors will make the use of these incubators a breeze. Thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Available in the special models FOT (SMART version) and FIT (SMART PRO version) FOCUS: Photoperiodic (FOT) and phytotron (FIT) systems allow day/night simulation. While the FOT option allows you to turn the light on and off from the display thanks to a program, with the FIT option you can also control the intensity of the light. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. ILW SMART SERIES POL-EKO offers 5 models of refrigerated incubators with capacities from 56 to 749 litres. The ILW series are only available in the forced air version. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Internal glass door 4 - Shelf 5 - Condenser housing 6 - Solid external door 7 - Temperature sensor 8 - Ventilation 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 12 - Handle with lock 1 - Main switch 2 - Adjustable feet 3 - LAN port 4 - Fuse 5 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the FIT system (phytotron) for the ILW SMART PRO models. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - Automatic defrost function - Version up to -10°C - Reinforced version - Interior light - Photoperiodic system - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Teledyne Tekmar Atomx Automated VOC Sample Preparation system | 15-0000-1EC for parts BRUKER For par (more)ts only