Binder CB210 CO2 Incubator

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Binder CO2 Incubator CB 160 Lab This item was removed from a university where it was surplus to requ (more)irement. The system has been professionally serviced and is in full working order. A report is available on request. Requires CO2 connection fitted. It is in great cosmetic condition. 2 x Shelf (60x60cm)

This item has just arrived in our stock. Please enquire for further details.

Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP1400eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP1400eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP1400eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V includes: - 4 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IN450 Natural Convection Incubator 449L, 115V Working Temperature Range At least 5°C above  (more)ambient to +80°C Convection Type Natural Convection Chamber Volume 449 L Features - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Spacious 449 L (15.9 cu.ft.) capacity, suitable for a wide range of applications - ControlCOCKPIT with SingleDISPLAY, adaptive PID-microprocessor controller and high-definition TFT-color display - Inner glass doors with fully insulated stainless steel exterior doors and 2-point compression locking system - Adjustable settings for temperature (Celsius or Fahrenheit), air flap position, and timer, with calibration for three user-selected temperature values - Natural convection system with pre-heated fresh air admixture through electronically adjustable air flap - Comprehensive AtmoCONTROL software for data logging, available via Ethernet or USB - Maximum chamber load of 661 lbs, with eight shelf positions and a 66 lbs load capacity per shelf The Memmert IN450 Natural Convection Incubator 449L, 115V offers a generous 449 L (15.9 cu.ft.) chamber, ideal for a variety of applications requiring consistent temperature control. With a temperature range from +20°C to +80°C, it can maintain precise settings as low as 5°C above ambient. The ControlCOCKPIT with SingleDISPLAY provides adaptive control via a high-definition TFT display, allowing easy adjustments in temperature (Celsius or Fahrenheit), air flap position, and timer settings. Featuring an inner glass door within a fully insulated stainless steel exterior with a 2-point compression locking system, the incubator combines visibility with security. The natural convection system and pre-heated fresh air admixture ensure uniform chamber conditions, while AtmoCONTROL software enables efficient data logging and management. With a sturdy design supporting up to eight shelves, a max load of 661 lbs, and advanced safety features, this incubator meets the rigorous demands of laboratory environments. INCLUDED: The Memmert IN450 Natural Convection Incubator 449L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert ICP260 Refrigerated Forced Circulation Incubator 256L, 115V Setting Temperature Range -12°C (more) to +60°C Setting Accuracy Temperature 0.1 °C Chamber Volume 256 L (9 cu. ft.) Features - Working temperature range from -12°C to +60°C with optimum performance between +16°C and +34°C - Large 256 L (9 cu. ft.) capacity - Inner glass door provides visibility while maintaining internal conditions - TwinDISPLAY with digital PID-microprocessor controller and high-definition TFT-color displays - Energy-efficient, CFC-free cooling system with automatic defrosting - Precise temperature control with a setting accuracy of 0.1°C - Durable construction with rear zinc-plated steel and stainless steel interior - Comprehensive safety features including AutoSAFETY over- and undertemperature protection The Memmert ICP260 Refrigerated Forced Circulation Incubator 256L, 115V offers precision temperature control within a -12°C to +60°C range, making it ideal for sensitive applications in laboratory settings. This model features a generous 256 L (9 cu. ft.) capacity, with a robust stainless steel interior and an inner glass door, ensuring easy observation without disturbing internal conditions. Equipped with TwinDISPLAY, an adaptive PID-microprocessor controller with high-definition TFT-color screens, the ICP260 provides reliable, intuitive control of temperature, fan speed, program time, and more, with settings in both Celsius and Fahrenheit. The incubator’s air jacket heating system delivers uniform heat distribution while the energy-efficient, CFC-free cooling system with automatic defrosting keeps operations smooth and sustainable. Safety is a priority with built-in AutoSAFETY over- and undertemperature protection, visual and acoustic alarms, and a mechanical temperature limiter that activates if the heating exceeds nominal limits. From its durable zinc-plated housing to its AtmoCONTROL software support for efficient programming and data management, this Memmert incubator combines advanced functionality with user-friendly design, meeting high standards for laboratory applications. INCLUDED: The Memmert ICP260 Refrigerated Forced Circulation Incubator 256L, 115V includes: - 2 Stainless Steel Grids - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

HortiSpec+ equipped with a NR Lite2 Net Radiometer probe. The HortiSpec was developed to measure the (more) light intensity and spectral distribution in the visible and NIR range inside greenhouses. Plant growth and the photo synthesis depends very much on light intensisty and spectral distribution of the light intensity. The light intensity can be measured with the HortiSpec in Photons or other parameter, specific for the Horticulture. NR Lite2 is designed for routine measurement of net radiation which is the balance between incoming and outgoing radiation under outdoor conditions. The design of the NR Lite2 is unique. The double-sided detector has black conical absorbers with an anti-stick weather resistant protective coating. In contrast to other sensor designs, NR Lite2 requires no fragile plastic domes. This results in a virtually maintenance free design. The vertical stick prevents birds from affecting the output signal. Spectrometer: AvaSpec – 2048, CCD linear array 2048 pixels Grating VA, wavelength range (300 – 1100 nm) 200 µm slit, Detector collection lens, Order sorting coating Data communicaton: USB version 2.0, 480 mbps Aperture: Diffusor, diameter 3.9 mm Software: HortiSpec Irradiance software Measurement units: photon flux in µmol/s.m² Parameters: Lux, PAR, Blue, Yellow/Green, Red, Far red Specifications NR Lite2: Spectral range (overall): 0.2 to 100 µm Sensitivity: 10 µV/W/m² Response time: < 20 s Operational temperature range: -30 °C to +70 °C

This Perkin Elmer Pyris 1 Differential Scanning Calorimeter System was removed from a university lab (more) where it was surplus to requirements. The unit has been inspected and fully tested by a qualified engineer. It was confirmed to be in full working order, but the dongle for the software is missing. Included with it are; 1 x Perkin Elmer Differential Scanning Calorimeter - Pyris 1Part no. N537-0050 1 x Dell Optiplex PC (SN-MQ4ZP) With PYRIS 1 SOFTWARE1 x Microsoft Mouse1 x Dell Keyboard Model - AT102W (SN-M9801-22017)1 x Norgren Gas Regulator1 x Perkin Elmer Pyris 1 Spares Kit (Wooden box)3 x Perkin Elmer cases with small parts1 x Perkin Elmer Hammer accessory1 x Thermometer on stand Everything is in reasonably good cosmetic condition with some marks from age and use.

Balance of the AS X7 series is an advanced analytical weighing device of the SYNERGY LAB line. The A (more)S X7 is exceptional due to a range of modern constructional and system solutions that guarantee reliability, precision and accuracy of measurement, and make everyday operation easy. Ergonomic Mechanical Design The latest AS X7 analytical balance features spacious weighing chamber, and the open-door clearance facilitates easy access to the weighing pan. With this it is possible to use laboratory glassware of various sizes. New aluminium base is a guarantee for weighing system stability. Dual-CLICK system allows tool-free assembly and disassembly of the weighing chamber, and a special design of guides for weighing chamber panes (no rims) makes keeping the device clean convenient. Innovative construction solutions increase balance durability and reliability in long-term operation. Colour Touch Screen The latest generation touch panel of 7&rdquo; diagonal stands for comfort of operation, even when you have laboratory gloves on. The AS X7 analytical balances guarantee simple and intuitive communication due to wide selection of widgets. The widgets can be freely configured in accordance with user needs. Screen customization favours access to information and results directly from the home screen. The user can configure a complete set of buttons and assign it to a particular operation mode. He(she) can also define info and text fields. LevelSENSING System The in-built sensors measure tilt, and display graphic message on the weighing device screen. In accordance with GLP and GMP, the LevelSENSING system simplifies the adjustment, ensures an ongoing control of the level and informs about deviations. Internal Adjustment Modernized internal adjustment system guarantees accurate indications in extremely unfavourable conditions. SMARTLab AS X7 balances are equipped with a SMARTLab system of an extensive functionality. It ensures support and supervision over the mass measurement process and reduces hazard of error caused by so called &bdquo;human factor&rdquo;. Automatic adjustment Regardless of external ambient conditions, the automatic internal adjustment system guarantees 100% efficiency in eliminating balance sensitivity deviations. Sensors Touch-free operation and programmable sensors facilitate daily work and reduce the range of actions performed during the weighing procedure. Alibi memory Data safety is assured with the ALIBI memory, which is integrated into AS X7 balances. The memory enables record of up to 500 000 weighings and guarantees continuity of data collection over a long period of time. Wi-Fi Remote control of the balance via devices, operation of which is based on Android, IPhone, Windows10 systems. Data control Accessing information in the balance depends on the user&#39;s permission level. The administrator can manage three different permission levels. Automatic Weighing Records Reports on processes and partial weighings can be generated and sent for archiving via the USB to external devices. Ambient Conditions Monitoring Communication with RADWAG thermo-hygro-barometer allows monitoring of ambient conditions such as temperature and atmospheric humidity. Databases Information system of the AS X7 balances is based on 7 databases that enable operation of many users with numerous products, all the stored data can be subjected to analysis. Weighing data is recorded in 7 databases: &bull; Operators (max 100 entries), &bull; Products (max 5 000 entries), &bull; Weighings (max 50 000 entries), &bull; Packaging (max 100 entries) &bull; Formulations (max 100 entries), &bull; Customers (max 1000 entries), &bull; ALIBI memory (max 512 000 weighings). Additionally it is possible to create formulation reports (max 500 reports). Communication Interfaces The functionality of AS X7 balances can be expanded using the following communication interfaces: USB-A, USB-B, RS 232, DB9 tara/print, Ethernet, Wi-Fi. The additional USB port located on the front of the balance enables easy and fast communication with the USB flash drive, it is possible to connect additional devices via this port too. AS X7 balances are equipped with Kensington Lock, which allows to secure the device against theft. Additional option: Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Gilson Pipetman L P1000L 100 - 1000 uL, Metal Ejector Pipette Designed for performance and comfort,  (more)PIPETMAN® L comes in a comprehensive range of models adapted to your needs in the lab. Comfortable, precise, accurate, and reliable, use PIPETMAN L pipettes confidently in your applications.Available as a fixed or variable volume, the PIPETMAN L air-displacement pipettes cover a full volume range, including: - Variable volume single channel models covering a volume range from 0.2 μL to 10 mL - Variable volume multichannel models covering a volume range from 0.5 μL to 1200 μL, including four models equipped with V-rings (VR) at the bottom of the tip holder for a proper fit with most tip brands, covering a volume range from 20 µL to 300 µL - Fixed volume single channel models covering a volume range from 1 μL to 5000 μL Convenient Use Lightweight and balanced, PIPETMAN L combines an ergonomic design with minimized pipetting forces, giving you the ability to pipette longer without fatigue. Right-handed or left-handed? No problem. Adjust the location of the tip ejector to the most comfortable position for you. Secure Pipetting Reduce pipetting errors and avoid accidental volume changes during pipetting cycles with a true volume-locking mechanism for improved accuracy and precision. PIPETMAN L variable volume models are all fully autoclavable without disassembly for maximum convenience and protection from cross-contamination. Large volume models are equipped with a plastic tip ejector to avoid direct contact with the tip and better compatibility with chemicals. Choose Your Tip Ejector For single channel models, choose between a model with a stainless-steel tip ejector or a plastic ejector, depending on your needs and applications. GLP Compliance PIPETMAN L models feature a DataMatrix 2D code for easy traceability. Use a 2D code scanner to transfer the code automatically into any traceability or asset management system. Also, the pipette serial number is engraved on the body of the pipette for unique identification. Click Here to View Product Video CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman L P1000L 100 - 1000 uL, Metal Ejector Pipette includes: - Operator's Guide - 3 Year Manufacturer Warranty Gilson Pipetman L P1000L 100 - 1000 uL, Metal Ejector Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeManual Air DisplacementVolume Range100 - 1000 µLPipette ModelP1000LPipette RangePIPETMAN LNumber of Channels1Ejector TypeMetalPack Size1Pack Size UnitEachComparison of ModelsSpecificationsP2L (0.2 - 2 µL)P10L (1 - 10 µL)P20L (2 - 20 µL)P100L (10 - 100 µL)P200L (20 - 200 µL)P1000L (100 - 1000 µL)P5000L (500 - 5000 µL)P10 mL (1 - 10 mL)Adjustable or Fixed VolumeAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustableAdjustablePipette TypeManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementVolume Range0.2 - 2 µL1 - 10 µL2 - 20 µL10 - 100 µL20 - 200 µL100 - 1000 µL500 - 5000 µL1 - 10 mLNumber of Channels11111111.comparison-table tr td:nth-child(7) { background-color: #fffacd; }