Cooled Incubator SMART ILW 240 POL-EKO

Thermo Scientific HERACELL 150i GP Co2 incubator / oven In excellent condition, only used 6 months.  (more)Thermo reference: 51032719 Years of manufacture: 2021 Forced convection Volume: 151 liters Stainless steel chamber iCAN touch screen Patented humidification system without water tray for rapid return to set points Temperature regulation range. : TA+3 at 55°C Constant humidity: 95% ± 3 Hr CO2 regulation range: 0 to 20% Heat emission at 37°C: 0.06 kWh/h CE certification 230 V, 50/60 Hz Ext. sun. (L x H x D) mm: 637 x 867 x 782 Sun Int. (L x H x D) mm: 470 x 607 x 530 Weight: 70 kg Supplied complete with: 1 CO2 thermal conductivity (CT) sensor 1 water level sensor 3 stainless steel shelves 423 x 465 mm 1 42 mm cable passage 1 interior glass door with closure Tested at 37°C CO2 at 5% Year of manufacture: 2021

A programmable laboratory incubator with multiparametric microprocessor with the possibility of memo (more)rizing 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable incubator ICT-R 120 FALC

Orbital shaker with Ohaus incubator and cooling The innovative OHAUS incubating cooling shakers are  (more)designed to have a wide temperature range from 10°C below ambient up to 65°C to ensure accurate and repeatable results. All models feature independent displays with intuitive controls and include safety features to protect both the operator and the sample. These rugged laboratory instruments have triple eccentric drive systems for stable orbital motion and are equipped with integrated chip control for reliable shaking. - Prepared for the use of microplates, without the need for accessories, and can easily accommodate modular blocks thanks to the block adapter supplied. - User-controlled temperature calibration function for sensitive applications. Digital control for an adjustable and repeatable shaking speed. - The innovative design with Peltier system, for direct contact between plate and sample, ensures rapid and uniform heating and cooling precision. Applications Immunological analyzes, hybridizations, cell cultures, suspensions and bacterial and yeast cultures, ELISA tests, PCR, enzymatic reactions Display Independent LED displays with temperature, speed and time information are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum structure with polycarbonate cover and brushless DC motor Construction features Splash resistant construction, overload protection and hot warning indicator Technical Specifications - ISICMBCDG - Calibration: temperature calibration - Transmission System: Brushless DC Motor; triple Eccentric - Safety Certification: CE; TUV - Speed ​​Accuracy: ±2% - Speed ​​range: 100 to 1,200 rpm - Timer: 1 second to 160 hours - Tray structure: aluminum

Kendro Heracell C02 incubator. Air jacket. Capacity 151 L. Temperature range from ambient + 3ºC to 5 (more)5°C. ContraCon 90 ºC decontamination routine. Constant humidity: =/>95%rH. CO2 control range from 0 to 20% by volume. Overtemperature protection. Stainless steel interior with 3 trays and 2 drip trays. Foil control panel with digital display. Interface RS 232. Dimensions (WHD):  internal 470*607*530 mm, external 637*867*760 mm. Power 230 V. 50/60 Hz. 550 W. User manual. The Kendro / Heraeus HERAcell 150 CO2 Incubator is the ideal CO2 incubator for cell and tissue cultures, including development of ova or embryos at or near body temperature. It provides everything needed to protect and grow the user's samples, including safe and stable incubation conditions to ensure optimum culture growth. HERAcell incubators use a ContraCon 90°C decontamination routine which decontaminates the entire chamber interior and is proven to eliminate mycoplasma as well. Also, they are enhanced with an air jacket to maintain temperature uniformity and quick set-up time, as well as direct humidification which offers the fastest humidity recovery times and provides optimal growth conditions for cultures.

Abbott Commander Incubator 8 shelves Type 6210/02

VARIAN DS 102 vacuum pump DS102 model Code: SQ 396 1725/1425 rpm 230 V 50/60 Hz 1/2 HP Vacuum limit: (more) 11.0 x 10-3 mbar (0.011 mbar) External dimensions (D)x(H)x(W): 42 x 14 x 24 cm Weight: 24Kg Without filter

FiveEasy pH meter F20-Std-Kit METTLER TOLEDO Thanks to FiveEasy's intuitive operation, elegant desig (more)n and simple data export functions, you can measure in comfort. Ideal for laboratory applications, the FiveEasy and FiveEasy Plus worktops provide high quality pH/mV or conductivity measurements with a simple click. Compact in design and equipped with various data export capabilities, the FiveEasy series instruments are the perfect companion for obtaining reliable measurement data, at an excellent quality/price ratio. SIMPLE MEASUREMENT Impeccable pH measurements, fast and efficient thanks to a large, well-structured display and an intuitive button layout. COMPACT, SPACE-SAVING DESIGN Thanks to its compact design and removable sensor holder (stowable on the side of the meter), the instrument takes up little space on the workbench. The rectangular structure allows easy stacking of the instrument and is very light: only 0.63 kg for 227 x 147 x 70 mm of dimensions. Specifications - FiveEasy pH meter FP20-Std-Kit Parameter: pH;mV Channel: Single channel Version kit: Ready-to-use measuring kit Sensor: LE438 PH measuring range: 0 - 14 PH resolution: 0,01 Accuracy pH (±): 0,01 Measurement range mV: 0 MV resolution: 1 MV accuracy (±): 1 Temperature range (2): 0°C - 100°C Temperature resolution: 0.1°C Temperature accuracy (±): 0.5°C. Portable: No ISM Assistance: No Once you have purchased the product, you will find simple and clear videos on how to set up and calibrate your FiveEasy ph-meter:

Ohaus orbital shakers for extreme environments These OHAUS-designed instruments are used for applica (more)tions that require CO2 and high humidity for optimal cell growth. They are equipped with a remote control, which magnetically attaches to the outside of almost any incubator or rests comfortably on the workbench (as shown in the photo). The base of the stirrer is placed inside the incubator and connected to the controller with a 170 cm cable which allows for easy external control of the speed and time settings. For these characteristics, the motor is equipped with an IP65 degree of protection. Applications Cell cultures, solubility studies, extraction procedures, suspensions and bacterial and yeast cultures, dyes/bleaches, immunoassays, protein studies, absorption techniques Display Independent LED displays to allow the operator to view speed and time settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) and stainless steel, external control module, thin ribbon cable (1.7m) that passes easily under the hatch of the incubator or in the general door Construction features Integrated tray (33x33 cm) with non-slip rubber mat (included)

PUE HX5.EX terminal is a constructional component of industrial multifunctional load cell scales. It (more) is the most modern RADWAG solution to be used in areas endangered with explosive atmosphere. The HX5.EX is compliant with ATEX directive regulations. The terminal is intended for operation in environment filled with explosive gases and dust, and can be placed in zones: 1/21 and 2/22. Standard version of the terminal is equipped with 2 serial intrinsically safe RS232 communication interfaces, and with one intrinsically safe RS485 interface. They facilitate communication with equipment predetermined for use in hazardous areas. Possibility to add digital inputs/outputs expands the range of instruments compatible with the terminal by robotic elements compliant with ATEX directive. For more demanding customers, RADWAG has developed IM01.EX module, installed in the safe area, which extends the available connector range by Ethernet, USB, 4-20mA/0-10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables communication between the terminal and external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Models There are 4 different models: PUE HX5.EX-1: 2 × RS232, RS485 - standard design, PUE HX5.EX-2: standard design + 4IN/4OUT, PUE HX5.EX-3: standard design + 4IN, PUE HX5.EX-4: standard design + 4OUT. Mechanical Design The housing, made of AISI 304 stainless steel, ensures high ingress protection, IP66 / IP68 (up to 1.5 m immersion). The terminal features 5" colour LCD, covered with polycarbonate protecting it against shocks, and a membrane keypad. Ease of operation, clear menu and intuitive information arrangement on the display guarantee comfort of operation. Hermetic intrinsically safe interface connectors are located on the back side of the housing. Stable bracket enables mounting the terminal either on a flat horizontal surface or on the wall. The device tilt can be easily adjusted. Power Supply The PUE HX5.EX terminal can be connected to the mains only with a certified intrinsically safe power supply, manufactured by RADWAG: PM01.EX-1 power supply intended for operation in hazardous area: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2 power supply intended for operation in safe area, equipped with intrinsically safe circuits which may be placed in: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. IM01.EX Communication Module The terminal’s interface range can be expanded using IM01.EX communication module, connected to the terminal via an intrinsically safe RS485 interface, placed outside the hazardous area. Models: IM01.EX-1 Standard: 2x RS232, USB,4 I/4 O, Ethernet IM01.EX-2 analog output 4-20mA/0-10V IM01.EX-3 12 I/12 O, digital IM01.EX-4 Profibus DP IM01.EX-5 PROFINET IM01.EX-6 CANopen (available soon) IM01.EX-7 DeviceNet (available soon) IM01.EX-8 RS485 IM01.EX: ETHERNET IP (available soon) Multifunctional Software Terminal software facilitates processes such as weighing, parts counting, dosing, and percent weighing. Terminal’s information system is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. The interfaces enable communication between the terminal and the accessories intended for operation in the hazardous and non-hazardous areas. Accessories: barcode scanners, printers, external displays, control buttons, light signalling towers and other controlling/signalling devices. The terminal can communicate with systems for automatic process control and superior IT systems.

Eppendorf F-35-6-30 Fixed Angle Rotor Eppendorf F-35-6-30 Fixed Angle Rotor, new in packaging. Cat.  (more)# 022822228. This rotor accommodates 6 x 15/50ml. The Eppendorf F-35-6-30 Fixed Angle Rotor is for use in the Vacufuge Plus Vacuum Concentrator. INCLUDED: The Eppendorf F-35-6-30 Fixed Angle Rotor includes: - Full 1 Year Parts and Labor Warranty