New Brunswick Innova 4300 Incubator Shaker Mfg no. M1193-0100 Lab

This New Brunswick Innova 4330 Incubator Shaker was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but does not shake. The heating and cooling functions work. It is in reasonably good cosmetic condition with minor marks.

3M Invivo2 400 Hypoxia Workstation Lab This item was removed from a university where it was surplus  (more)to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition.

FTC 120 is a small / medium-sized refrigerated thermostat specially designed for the incubation of u (more)nits for the measurement of BOD. The uniformity of the temperature, fixed at 20°C, inside the incubation chamber is obtained by means of forced air circulation. The digital display allows a constant display of the actual internal temperature. - Samples incubated at the standard of 20°C - 2 internal sockets to power BOD measuring devices - Accepts 3 BOD Sensor System 6 or 2 BOD Sensor System 10 - Uniform temperature through the use of forced ventilation - 2-digit display of the internal temperature - Ecological cooling system - Low operating cost - 2 shelves included Interior of the FOC 120E model, which differs from the FTC 120 model for the adjustable temperature and the wifi connection to the Ermes cloud by Velp. Large Capacity The VELP refrigerated thermostats guarantee excellent conditions for storing samples, always, and a large capacity, given the possibility of comfortably accommodating three BOD Sensor System 6 or two BOD Sensor System 10 simultaneously (available as accessories).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Ohaus Scout STX2201 portable scale, with plate 170x140mm These balances are ideal for laboratory and (more) industrial applications. They feature an easy-to-navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They are also equipped with excellent overload protection and advanced connection options. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Dynamic / Animal Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3'' (109 mm) touchscreen display with VGA color graphics resolution and user-controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Structure ABS housing, stainless steel deck, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, safety slot, stabilizing feet, level indicator front illuminated Construction features Stability indicator, stackable design with storage cover included (except 1mg models), mechanical and software protection against overload and underload, battery life indicator, automatic shutdown, automatic tare, calibration mass provided on models with capacity higher than 620 gr. Integrated applications: - Weighing: determines the weight of the objects on the pan in the selected unit of measurement. - Piece Counting: Counts the number of pieces on the pan using a uniform weight. - Percent Weighing: Measures the weight of a sample displayed as a percentage of a preset weight reference. - Weight check: compares the weight of a sample with respect to the target limits. - Dynamic Weighing: Weighs an unstable sample load. The scale takes an average of weights over a period of time. - Totalization: measures the cumulative weight of multiple objects. The cumulative total can exceed the capacity of the balance. - Density determination: determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for objects that cannot be easily placed on the weighing pan. - Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. - Mole Weighing: Measures the weight of a sample and  calculate it into Moles automatically New generation of Ohaus portable scales These balances are ideal for laboratory and industrial applications. They feature an easy to navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They also feature excellent overload protection and advanced connection options. - Fast and efficient navigation thanks to the color touchscreen display - High weighing speed and high resolution display of repeatable and reliable results - Excellent overload protection - Different application modes and operation in various languages ​​for simplified weighing The OHAUS Scout scale can be equipped with various connectivity options: RS232, USB, USB device, Ethernet or Bluetooth®. These options guarantee a modern and smart experience, increase the versatility of data collection and transfer functions. Other standard features and equipment Transport lock, stainless steel weighing pan, menu and setting lock switch, adjustable and non-slip feet, bubble level, software and mechanical overload/underload protection, stability indicator, automatic tare, level indicator low battery, auto power off, user selectable print options and communication settings. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Check Weighing: Compares the weight of a sample against target limits. Dynamic Weighing: Weigh an unstable sample load. The balance takes an average of weights over a period of time. Totalization: Measures the cumulative weight of multiple items. Cumulative total may exceed balance capacity. Density Determination: Determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for items that cannot easily be placed on the weighing pan. Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. Mole Weighing: Measures the weight of a sample and automatically calculates it into the mole. MODELS AVAILABLE: Applications Weighing, Parts Counting, Percent Weighing, Check Weighing, Animal/Dynamic Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3' (109mm) touchscreen display with color VGA graphics resolution and user controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery level indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Framework ABS housing, stainless steel pan, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, security slot, stabilizing feet, level indicator illuminated front Construction features Stability indicator, stackable design with included storage cover (except 1mg models), mechanical and software overload and underload protection, battery life indicator, auto power off, auto tare, calibration weight provided in models with capacity greater than 620 gr. THE TOUCHSCREEN DISPLAY Using portable scales has never been easier! The color touchscreen display allows you to explore the interface and icon menu, open and close application modes, change units of measure with a single touch of the screen. In seconds, an unmatched level of portable weighing efficiency and functionality. In addition, GLP/GMP traceability makes it easier to monitor and report data.

Yamato WA-401UV Auto Pure Economical Type 1 Water Purification System with 0.2 Micron Capsule Filter (more) and Combination UV, 120V Purity 18 Megohm- cm Flow Rate 2L/min (0.53 gpm) with Capsule Filter Pressure Range 20 to 90 PSIG Features - 4 LPM of 18 MΩ Type 1 reagent water on demand - Low-cost of ownership - Replacement cartridges are fresh and made in the USA with a 1 year shelf life. - Compact design - Quick change, cartridge – no tools needed - Built-in pressure regulator Water System with 0.2 micron capsule filter with combination UV for bacteria and TOC distruct. Type 1 water quality. This system provides 4L per minute of 18.2 megohm water. A quiet recirculation pump ensures constant water purity. Water quality meets or exceeds ASTM Type I water specifications. VP series cartridges sold separately. INCLUDED: The Yamato WA-401UV Auto Pure Economical Type 1 Water Purification System with 0.2 Micron Capsule Filter and Combination UV, 120V includes: - 0.2 Micron Capsule Filter - UV Bulb - Outlet Angle Valve w/ Teflon Tape - Quick Connect CPC 3/8” Male x 3/8” - Compression Fitting for Direct Feed Add-On - Final Filter for Dispensing Gun Add-On - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato LT-400AA Complete Overhead Stirrer with Stand & 60mm 4-Blade Propeller, 115V Speed Range  (more) 10~300rpm Max Torque 0.9N•m (9.0kgf•cm) Motor DC Brushless Motor 30W Features - Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir - Maintenance free DC brushless motor - Digital speed indicator for accurate speed setting and confirmation - Noise prevention measures for optimal work environment - More safety-oriented design Laboratory stirrer with higher torque for high viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. Set includes stand, rod, stainless steel shaft and 60mm 4-blade propeller. Speed range 10~300 rpm. INCLUDED: The Yamato LT-400AA Complete Overhead Stirrer with Stand & 60mm 4-Blade Propeller, 115V includes: - Stand and Rod - Clamp, Safety Cover, Chuck Handle - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.