Boekel 113002-2 Digital Dry Bath Incubator Block Heater

Sanyo MDF-U5386S Ultra-Low Temperature Freezer -86 This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks from use. 483 litre / 17.1 cu ft volume 3 X height adjustable shelves 64cm x 54cm

Heated immersion circulator Isotemp 4100C FISHER SCIENTIFIC New equipment (never used) Fisherbrand T (more)emperature range: Ambient temperature 10 to 100°C Heating capacity: 1.2 kW Model: 4100C Temperature stability: ± 0.05°C Dimensions: 11.18 x 32 x 20.27 cm Weight: 4.1kg Voltage: 230 V Max pressure 310

Labconco RapidVapVacuum Evaporation System with Lid HeaterAdvanced vacuum function Microprocessor  (more) controls vacuum at preset level; Automatic vacuum release if power fails LCD shows vacuum level from 0 to 999mbar Rear-mounted vacuum connections: vacuum port, tubing clamps, lid heater receptacle, 30 in.L (76cm) 0.5 in. I.D. tubing for connection to accessory vacuum pump Safety features Lexan™ shield on clear glass lid protects against glass implosion Dual lid clamps hold lid securely in place for vacuum-tight seal Phenol-free gasket provides complete sealing under vacuum PTFE-coated aluminum chamber Audible/visual alarm for end point detected by temperature sensors at heater and block Optional Lid Heater 40w heater plugs into electrical receptacle on rear Eliminates fogging, increases visibility when evaporating water or other high-boiling-point solvents Improved control panel Easy-to-read LCD display prompts operator to program desired parameters, and displays vortex speed by percentage, actual and set temperatures in C, and total time remaining in minutes. Enter up to nine different protocols into memory for easy repetition of exact test parameters Advanced heating system Contamination- and maintenance-free 1000-watt dry block heating system speeds evaporation rate by supplying a controlled amount of heat from ambient up to 100C Heater and sample block move in tandem for more efficient heat transfer Alarm signals completion of run, allowing samples to be left unattended while evaporating to desired endpoint Efficient operation Brushless DC motor ensures safe, maintenance-free operation and provides smooth, variable-speed power up to 1000rpm Produces no potentially dangerous sparks Increased durability Systems may be used with broad range of strong chemicals Powder-coated, aluminum cabinet base with smooth, solvent-resistant acrylic/PVC thermoplastic upper housing Aluminum chamber with PTFE coating conducts heat efficiently and resists corrosion All mechanical components are isolated from chemical fumes and vapors for longer life Chemical-resistant glass lid provides visibility of samples and detaches for cleaning Two clamps hold lid securely in place Phenol-free gasket provides sealing without potential for phenol contamination RapidVap models with optional RS-232 link allow all front panel functions to be performed and monitored from a personal computer (not included) INCLUDED: The Labconco 7900002 RapidVapVacuum Evaporation System with Lid Heater, 115V, 60Hz includes: - Vacuum Hose - Clamps x 2 - Heat Transfer Grease - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Number of stirring positions: 1 Stirring quantity max. per stirring position (H2O): 15 l Maximun loa (more)d: 20 kg Speed adjustment: scale 0 – 6 Speed range: 100 – 1500 rpm Stirring bar length max: 80 mm Self-heating of the set-up plate by max. stirring (RT:22°C/duration:1h): +1 K Heating temperature range: 50 – 500°C Heat control: Turning knob Temperature setting resolution of heating plate: 5 K Connection for ext. temperature sensor: PT1000 (included) Fixed safety circuit: 550°C Set-up plate material: ceramic Set-up plate dimensions: 260 x 260 mm Heating rate (1l H2O in H1500): 5 K/min Dimensions (WxHxD): 300 x 105 x 415 mm Weight: 8.308 kg

Temperature range: -9°C to -30°C Dimensions (HxWxD): 1835 x 590 x 605 mm Internal drawer dimensions  (more)(HxWxD): 170 x 430 x 400 mm Capacity: 284 L

Temperature settings: -18°C/-20°C/-22°C/-24°C/-26°C Dimensions (HxWxD): 1850 x 600 x 650 mm Internal (more) dimensions (HxWxD): 1580 x 450 x 360 mm Capacity: 282 L

Heraeus 3335 Rotor This item was removed from a university lab where it was surplus to requirements. (more) It is in fair cosmetic condition and includes the lid. This item has not been tested. Max RPM: 20,500Max Capacity: 8 x 50mL

Thermo Scientific Electron Finnpipette 50µl Laboratory Pipette Fixed volume pipette 50µl Volume: 50  (more)µl Not calibrated Test performed using a 10-4 g (0.1mg) balance: Reading (in g) for 50 µl: 0.051

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

Maximum capacity: 4 x 100 ml Maximum density: 1.2 kg/dm3 Maximum speed: 6000 RPM Maximum force: 4186 (more) RCF Maximum kinetic energy: 3000 Nm Noise level (dependent on rotor): ≤ 65 dB(A) Dimensions (WxDxH): 368 x 437 x 261 mm Weight: 15.6 kg No rotor included

Water Specifications: