Memmert ICO150med CO₂ Incubator

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)is in good working order. The inner door hasn't been tested as it requires compressed air but we see no reason why it would not work with the correct air setup. There are no gloves included. It is in good cosmetic condition with minor marks. Internal dimensions- D57.5 W105 H47cmShelf - 104 x 25cmRight chamber - D29 W33 H30cm

This Thermo Electron Forma Series II Water Jacketed CO2 Incubator 3141 was removed from a university (more) lab where it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition with some marks from use. It is missing two feet on the right-hand side, but we can replace these on sale. 2 Shelves - 47 x 47cm

Heraeus Function Line Incubator Type-B12 This item was removed from a university where it was surplu (more)s to requirement. The unit powers up and is in good working order. It is in good cosmetic condition.

Benchmark SureTemp Dual Convection 130L Incubator The new SureTemp Incubator series provides the hig (more)hest level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class. Each incubator is equipped with the SureCheck data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can then be viewed and saved using the included the SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping. Unlike other laboratory incubators, the SureTemp series offers “Dual-Convection” technology, allowing users to choose between mechanical convection mode or gravity convection mode. Mechanical convection incorporates optimally positioned heating elements in conjunction with an internal chamber fan to control the internal temperature. Gravity Convection eliminates any airflow from the chamber, relying solely on the heating elements and gravity to control the internal temperature. The heating elements are strategically located on multiple sides of the chamber and contents can be viewed with the separate inner glass door without disrupting the temperature environment.INCLUDED: The Benchmark SureTemp Dual Convection 130L Incubator includes: - SureTemp Data Logging Software - Internal Power Outlet - 2 Stainless Steel Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Memmert IN160 Natural Convection Incubator 161L, 115V Temperature Range At least 5°C above ambient  (more)to +80°C Convection Type Natural Convection Chamber Volume 161 L Features - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - High-resolution display with 0.1°C accuracy for both set point and actual temperature readings - Adjustable parameters include temperature in Celsius or Fahrenheit, air flap position, and program timing - SetpointWAIT function initiates process timing only once the set temperature is reached - AtmoCONTROL software enables seamless data management and programming via Ethernet - Durable, easy-to-clean stainless steel interior with reinforced ribbing for enhanced reliability - Inner glass door allows for easy sample monitoring without disrupting the internal environment - Built-in autodiagnostic system with adjustable overtemperature monitor for added safety The Memmert IN160 Natural Convection Incubator 161L, 115V is designed to deliver precise temperature control and reliable performance for a wide range of low-temperature applications. With a generous 161 L (5.6 cu.ft.) chamber, this unit is ideal for versatile sample storage. The temperature range extends from 5°C above ambient to +80°C, controlled by a high-resolution display with 0.1°C accuracy for both set points and actual values. Key adjustable parameters include temperature in Celsius or Fahrenheit, air flap position, and program timing, enhanced by the SetpointWAIT function, which begins process timing only when the set temperature is reached. For added convenience, AtmoCONTROL software provides efficient data management and programming via Ethernet. The durable stainless steel interior, reinforced with ribbing for longevity, is both easy to clean and corrosion-resistant. With an autodiagnostic system and adjustable overtemperature monitor, this incubator combines safety, functionality, and durability to meet rigorous lab requirements. INCLUDED: The Memmert IN160 Natural Convection Incubator 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

BINDER KB-115 refrigerated incubator / oven with forced convection 100 ° C Model: KB115 refrigerated (more) and ventilated - NEW GENERATION Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 700 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 125 kg Year of manufacture: 2022 Tested at 37 ° C and -2 ° C

Heidolph Polymax 2040 (10° tilt angle) Wave Platform Shaker With a usable area of390 x 340 mm, the P (more)olymax 2040 is the optimal shaker for increased samplethroughput. Since it can be equipped with a second story, the area can even bedoubled. This model is also offered with two tilt angles, so you can decidewhich option will best fit your needs. INCLUDED: The Heidolph Polymax 2040 (10° tilt angle) Wave Platform Shaker includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 3 Year Manufacturer's Warranty

BrandTech Scientific Transferpette S-12 Multichannel M12-10, 0.5 to 10ul Pipette Volume Range 0.5 to (more) 10 ul Accuracy 1.6% / 0.16 ul at 10 ul Pipette Type Air Displacement Features - Ergonomic design ensures a comfortable grip for all hand sizes and both right- and left-handed users - True one-handed operation allows for easy volume setting, pipetting, and tip ejection without changing grip - Low operating forces and short stroke enable relaxed pipetting during extended use - Volume-change protection prevents accidental adjustments and is easy to operate even with gloves - Easy Calibration technology allows quick, tool-free calibration for consistent accuracy - 360° rotating pipetting unit for personalized comfort and flexible operation - O-ring system ensures easy mounting and ejection of tips, reducing strain during use - Individually removable nose cones and seals for easy cleaning and maintenance The BrandTech Scientific Transferpette S-12 Multichannel M12-10, 0.5 to 10 ul Pipette is designed for precision and efficiency in high-throughput liquid handling tasks. With twelve channels and an adjustable volume range of 0.5 to 10 ul, this pipette is ideal for applications such as PCR setup, microplate assays, and small-volume dispensing. Its flexible volume settings—10 ul, 5 ul, and 1 ul—allow for versatile handling of small liquid volumes with high accuracy. Engineered for ergonomic comfort, the Transferpette S-12 minimizes hand fatigue with its lightweight design and low operating forces, making it perfect for extended pipetting sessions. True one-handed operation enables seamless volume adjustment, pipetting, and tip ejection without changing grip, streamlining lab workflows. Volume-change protection prevents accidental adjustments, ensuring consistent and precise results. Equipped with Easy Calibration technology, the pipette allows for quick, tool-free recalibration to maintain optimal performance. Built for durability with high chemical and UV resistance, the Transferpette S-12 Multichannel M12-10 is the perfect solution for reliable, precise liquid handling in demanding laboratory environments.Click Here to View Product Video INCLUDED: The BrandTech Scientific Transferpette S-12 Multichannel M12-10, 0.5 to 10ul Pipette includes: - 2 x TipBox - Shelf Mount - Reagent Reservoir - Mounting Wrench - Silicone Grease - 1 Set of Sealing Rings - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

LM3037 HP 1050 Series Solvent Conditioning Tray Type: 79856AX

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Made of transparent plastic, secures a balance housing against scratches, dust etc. Intended for bal (more)ances enclosed in housing of A2 type and equipped with 195 x 195 weighing pan.