Chemscan RDI Solid Phase Cytometer for Parts

Lasers: Blue Solid State: 488 nm, 55 mW, Software Controlled Red Solid State Diode: 638 nm, 50 mW, S (more)oftware Controlled Violet Solid State: 405 nm, 80 mW, Software Controlled Configuration: Nominal 90 µm spatially separated beam spots Flow cell: 430 µm x 180 µm rectangular channel Collection optics: Fixed integrated optics and quartz flow cell design with a numerical aperture of > 1.2 Detector filters: Forward Scatter: 488/20 Blue Laser: 525/40, 575/30, 614/20 , 675/20, 695/30, 755LP Dyes: FITC, PE, ECD, PC5 or PEC5.5, PECy7 Red Laser: 660/20, 725/20, 755 LP Dyes: APC or Alexa Fluor 647, APC-Alexa Fluor 700, APC-Cy7, APC-Alexa Fluor 750 Violet Laser: 450/50, 550/40 Dyes: Pacific Blue, Krome Orange Forward Scatter Detector: Fourier design providing up to 3 measurements of forward angle Side Scatter Detector: High performance photodiode with electronic attenuation Fluorescence Detectors: FL1 – FL6 Fluorescent Detectors Flow rates: Continuous pressure is applied to the sample tube based on user selected flow rates: Low, Medium and High Performance: Carryover: < 0.1%, Dead volume as low as 2 µL when using Beckman Coulter 12 x 75 mm polypropylene tube and adjustable probe Acquisition modes: 32 tube Multi Carousel Loader (MCL), Single tube sampling mode, Automated work list acquisition, Manual work list mode Mixing: The MCL vortexes each tube individually before sample acquisition Barcode reading: Carousel number, tube location, and tube barcode verified to worklist Biosafety: Biohazard contained wash station thoroughly rinses sample probe Throughput: 10000 normal leukocytes is 82 tubes/hour Scatter resolution: Resolves 0.4 micron particles from background noise using Forward Scatter, Maximum detection of up to 40 microns Fluorescence sensitivity: FITC < 107 MESF, PE < 64 MESF, PC5 < 13 MESF Acquisition rate: 25000 events per second, 90% yield Cytometer dimensions (WxHxD): 950 x 610 x 730 mm Cytometer weight: 104 kg Supply cart dimensions (WxHxD): 724 x 298 x 495 mm Supply cart weight: 30 kg Software included but requires a new licence purchase.

Partec Cyflow Space FACS stand alone system with Analytical cuvette. Equipped with: 4 measurable par (more)ameters: FCS, SSC, D3 and D4 bandpass filters (expandable to 9 parameters). Blue diode laser 20 mW 488 nm (expandable to 3 laser light sources). Sorting unit with green laser (sorting cuvette not included, but can be ordered from Sysmex). Fujitsu PC with Flowmax software for flow data analysis. Bottle rack for 1 liter bottles (for e.g. sheat fluids, buffers and waste).

Imaging performance Cell size: 5 – 300 microns (Cellometer CHT4-PD300 Slides are required for cells  (more)> 80 microns in diameter) Concentration range: 105 – 107 cells/ml Bright field imaging, fluorescent imaging and pattern-recognition software to quickly and accurately decluster, identify and count individual cells Fluorescent optics Excitation/Emission: 470nm/535nm Example fluorophores: Acridine Orange (+DNA) Calcein AM CFDA SYTO 9 SYTO 13 Excitation/Emission: 540nm/605nm Example fluorophores: Propidium iodide Ethidium bromide Dimensions (WxDxH): 280 x 300 x 330 mm Weight: 11.8 kg

FTC 120 is a small / medium-sized refrigerated thermostat specially designed for the incubation of u (more)nits for the measurement of BOD. The uniformity of the temperature, fixed at 20°C, inside the incubation chamber is obtained by means of forced air circulation. The digital display allows a constant display of the actual internal temperature. - Samples incubated at the standard of 20°C - 2 internal sockets to power BOD measuring devices - Accepts 3 BOD Sensor System 6 or 2 BOD Sensor System 10 - Uniform temperature through the use of forced ventilation - 2-digit display of the internal temperature - Ecological cooling system - Low operating cost - 2 shelves included Interior of the FOC 120E model, which differs from the FTC 120 model for the adjustable temperature and the wifi connection to the Ermes cloud by Velp. Large Capacity The VELP refrigerated thermostats guarantee excellent conditions for storing samples, always, and a large capacity, given the possibility of comfortably accommodating three BOD Sensor System 6 or two BOD Sensor System 10 simultaneously (available as accessories).

Labconco CentriVap -105 C Cold Trap Brushed, stainless steel and glacier white, epoxy-coated ste (more)el exterior with blue accents; Temperature graph illuminates green when collector coil reaches operating temperature of -65C HCFC-free refrigeration system with two 1/3 hp compressors lowers cold trap to -105C (-157°F) in less than 40 min. 4L stainless steel collector Arylic lid with two Quick-Disconnect fittings for connection to a CentriVap Concentrator Stainless steel drain port with corrosion-resistant, nylon valve Grounding clip and ON/OFF power switch INCLUDED: The Labconco 7385020 CentriVap -105 C Cold Trap, 115V, 60Hz includes: - Tubing - Clamps x 2 - Wire Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson MINIPULS 3 Pump (Drive Unit) w/ Selectable Standard Flow Peristaltic Pump HeadFeatures - Util (more)izes positive displacement pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds the Minipuls 3 is exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateMINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible.INCLUDED: The Gilson MINIPULS 3 Pump (Drive Unit) w/ Selectable Standard Flow Peristaltic Pump Head includes: - Selected Standard Flow Peristaltic Pump Head - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The Interflow cross flow unit has been developed to protect the object in the workspace of the cross (more) flow unit against external influences and contamination. The operation of the cross flow is based on the principle of the laminar (air) flow technique. This is an air flow which, after flowing through the filters, is virtually dust- and germ-free and flows through the workspace at a specific speed and according to a specific pattern. In this way, dirty air from outside the cross flow unit does not get a chance to enter the workspace. Absolute filter Type: TA2DS14G2F3XNCT Dimension: 610 x 1830 x 70 mm Quantity: 1 Pre-filter Type: V50 Cassette Dimension: 500 x 250 x 50 mm Quantity: 3 Fan Type: DD 9-7 TH ECM2 1/2 Quantity: 2 Relief Fixture: LED strip Type: Linear Flex Ulta Plus Watts: 1640 lm/m Color: 4000K (White) Light intensity: > 800 Lux Dimensions (WxDxH): 1860 x 792 x 1144 mm