Partec CyFlow Space FACS Flow Cytometer

Lasers: Blue Solid State: 488 nm, 55 mW, Software Controlled Red Solid State Diode: 638 nm, 50 mW, S (more)oftware Controlled Violet Solid State: 405 nm, 80 mW, Software Controlled Configuration: Nominal 90 µm spatially separated beam spots Flow cell: 430 µm x 180 µm rectangular channel Collection optics: Fixed integrated optics and quartz flow cell design with a numerical aperture of > 1.2 Detector filters: Forward Scatter: 488/20 Blue Laser: 525/40, 575/30, 614/20 , 675/20, 695/30, 755LP Dyes: FITC, PE, ECD, PC5 or PEC5.5, PECy7 Red Laser: 660/20, 725/20, 755 LP Dyes: APC or Alexa Fluor 647, APC-Alexa Fluor 700, APC-Cy7, APC-Alexa Fluor 750 Violet Laser: 450/50, 550/40 Dyes: Pacific Blue, Krome Orange Forward Scatter Detector: Fourier design providing up to 3 measurements of forward angle Side Scatter Detector: High performance photodiode with electronic attenuation Fluorescence Detectors: FL1 – FL6 Fluorescent Detectors Flow rates: Continuous pressure is applied to the sample tube based on user selected flow rates: Low, Medium and High Performance: Carryover: < 0.1%, Dead volume as low as 2 µL when using Beckman Coulter 12 x 75 mm polypropylene tube and adjustable probe Acquisition modes: 32 tube Multi Carousel Loader (MCL), Single tube sampling mode, Automated work list acquisition, Manual work list mode Mixing: The MCL vortexes each tube individually before sample acquisition Barcode reading: Carousel number, tube location, and tube barcode verified to worklist Biosafety: Biohazard contained wash station thoroughly rinses sample probe Throughput: 10000 normal leukocytes is 82 tubes/hour Scatter resolution: Resolves 0.4 micron particles from background noise using Forward Scatter, Maximum detection of up to 40 microns Fluorescence sensitivity: FITC < 107 MESF, PE < 64 MESF, PC5 < 13 MESF Acquisition rate: 25000 events per second, 90% yield Cytometer dimensions (WxHxD): 950 x 610 x 730 mm Cytometer weight: 104 kg Supply cart dimensions (WxHxD): 724 x 298 x 495 mm Supply cart weight: 30 kg Software included but requires a new licence purchase.

Met One offers battery-operated portability, up to six size channels and a built-in printerall in on (more)e simple, compact instrument. The Met One 237 counts airborne particles in up to six different size ranges simultaneously. Count data is displayed on the front-panel as total number of particles (cumulative count) or the particles in each size range (differential count). The bright LED display lets you see the data easily and the printout shows cumulative and differential count data for each size range. Channel Sizes: 2 ch; 0.5 µm, 5.0 µm – 4 ch; 0.5 µm, 0.7 µm, 1.0 µm, 5.0 µm – 5 ch; 0.5 µm, 0.7 µm, 1.0 µm, 2.0 µm, 5.0 µm – 6 ch; 0.5 µm, 0.7 µm, 1.0 µm, 2.0 µm, 3.0 µm, 5.0 µm Flow Rate: 0.1 CFM (2.83 LPM) Coincidence Limit: 2 million/ft3 Light Source: Laser diode Data Storage: 500 samples, rotating buffer Sample and Hold Times: 1 second to 24 hours Count Alarms: 1 to 9,999,999, counts each channel Count Modes: Manual, auto, concentration, beep Concentration Mode: 1 second samples, 1 to 10 samples averaged, display updated every second; displays counts/ft3, liter or counts/1000L (m3) Battery Recharge Time: 16 hours (with unit off) Battery Operating Time: 4 hours with printing, 8 hours without printing Dimensions (WxhXD): 170 x 120 x 300 mm Weight: 3.1 kg

Partec Cyflow Space FACS stand alone system with Analytical cuvette. Equipped with: 4 measurable par (more)ameters: FCS, SSC, D3 and D4 bandpass filters (expandable to 9 parameters). Blue diode laser 20 mW 488 nm (expandable to 3 laser light sources). Sorting unit with green laser (sorting cuvette not included, but can be ordered from Sysmex). Fujitsu PC with Flowmax software for flow data analysis. Bottle rack for 1 liter bottles (for e.g. sheat fluids, buffers and waste).

Coulter ZM Cell Counter, &nbsp;S.ST.II Sampling Stand &amp; V.C.U. VWII Vacuum Container This syste (more)m was removed from a university lab where it was surplus to requirements. Included are; 1x Coulter Counter ZMModel No. Z.M .The unit powers on and is in good cosmetic condition. There are some tape marks from general use. All knobs, dials and buttons are responsive to the unit.Both digital LCD screens are working and display well. 1x Coulter Sampling StandModel No. S.ST.IIWe were unable to power up the unit. Both the fuses were fine. 1x Coulter VW iiModel VCUThe unit is in good cosmetic condition, it has 2x 500ml glass jars with lids housed inside it. These lids have 2x hoses attached to them. Manuals:9x manuals are in good cosmetic condition and appear to be complete1x Datasheet book.

2 x Becton-Dickinson Remote Pre Amp - BD Biosciences LSR II Boards These were removed from a univers (more)ity lab where they were surplus to requirements. They are in good cosmetic condition but have not been tested.

Temperature Range: Ambient +5°C to 130°C Heating Rate: ≤ 25 min. 30° to 130°C Block capacity: 4 (not (more) included) Temperature Accuracy: ≤ ± 0.5°C Temperature Uniformity: ≤ ± 1°C Timer: 0 to 99:59 min or continuous Dimensions (LxWxH): 450 x 200 x 100 mm Weight: 4.7 kg

New Brunswick BioFlo/CelliGen 115 Fermentor Bioreactor Lab This item was removed from a university l (more)ab where it was surplus to requirements. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. We were advised by the lab that they were not in working order, but we do not have details of the fault. Specifications:- Serial No.: B115BP201267 - Model: BF115-3978114

VACUUBRAND VACUU-Select, VACUU-VIEW, VSP 3000, and KF DN 16 Package for Fine Vacuum Control Upper Me (more)asuring Limit 825 torr Lower Measuring Limit 1 x 10-3 torr Accuracy +/- 15% of indicated value in the range 0.01-5 mbar/hPa/torr Features - Complete package for vacuum control of all fine vacuum applications in chemical labs, with continuous control range from atmosphere to fine vacuum (10-3 mbar) - Application editor allows easy customization - Graphic user interface for simple operation - Predefined applications for quick, reproducible results and application editor for easy customization - Rugged VACUU·VIEW extended gauge with wide measuring range offers superior chemical resistance and mechanical robustness The VACUU·SELECT fine vacuum control packages provide an easy-to-use vacuum control option for work down to 10-3 mbar. These packages include the VACUU·SELECT controller with fine vacuum gauge, a chemical-resistant inline isolation valve (VV-B 15C), and the accessories required for connection to your vacuum system via small flange (KF) connections. VACUUBRAND offers fine vacuum control packages with two different small flange connections. The KF DN 16 fine vacuum control package is compatible with our rotary vane pump models RE / RZ 2.5 to RE / RZ 6 and our HYBRID pump RC 6. The KF DN 25 fine vacuum control package is configured for use with our RE / RZ 9 rotary vane pumps and VACUU·PURE screw pumps. With its intuitive, application-based user interface, the controller allows you to quickly get your fine vacuum process under control. For advanced processes, pre-defined applications can be modified, and new applications can be created to optimize your process conditions. The included inline solenoid valve and sensor are automatically configured via the proprietary VACUU·BUS system.INCLUDED: The VACUUBRAND VACUU-Select, VACUU-VIEW, VSP 3000, and KF DN 16 Package for Fine Vacuum Control includes: - Vacuum controller VACUU·SELECT (without internal vacuum sensor and venting valve) with with VACUU·VIEW extended and power supply - Solenoid valve VV-B 15C KF DN 16 - T-piece KF DN 16 - Hose nozzle DN 10 mm (PP) - Clamping and sealing rings - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The HX7.4P C is a brand new design comprised of the advanced PUE HX7 indicator, made of stainless st (more)eel, and a powder coated 4-load-cell pallet construction. It is intended for weighing of Euro pallets as well as any transport pallets of 800 &times; 1200 mm dimensions. The scale enables loading the weighing pan using a forklift. The indicator thanks to its distinguishing features such as a colour 7&rdquo; graphic display, and a diode bar graph which signals the current load mass referred to the scale range or the declared min and max thresholds, significantly simplifies the operation. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator&rsquo;s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.