Malvern Instruments Multisizer APA2000 Particle Counter

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The MACSQuant Analyzer 10 brings to life the versatility and power required for modern flow cytometr (more)y applications. Whether mining for rare cells, analyzing the efficiency of your cell manufacturing process or investigating signaling pathways, you are equipped for the task at hand. With a range of automated features, this flow cytometer lays the foundation for true automation present in all instruments belonging to the MACSQuant Family of flow cytometers. Laser excitation (spatially separated): 405 nm (40 mW), 488 nm (30 mW), 640 nm (20 mW) Emission detectors: FSC: 488/10 nm, SSC: 488/10 nm, V1: 450/50 nm, V2: 525/50 nm, B1: 525/50 nm, B2: 585/40 nm, B3: 655–730 nm, B4: 750 nm LP, R1: 655–730 nm, R2: 750 nm LP Fluorescence sensitivity and resolution: MESFs (CV <5%), FITC <200, PE <100, APC <150 Flow cell dimensions: 200 x 250 μm Fluorescence detectors: Optimized with spectrally matched PMTs for all channels Minimal uptake volume: 1 μL (25 μL recommended for volumetric counting applications) Sample flow rate: 25, 50, or 100 µL/min or automate flow rate to maintain 500, 1000, or 2000 events/second Measurement speed: <25 minutes per 96-well plate (5 μL measurement volume per well) Sample uptake: 1–450 µL Maximal event rate: Up to 15,000 events/second Dimensions (WxDxH): 669 x 500 x 554 mm Weight: 50 kg

Beckman Coulter MoFlo XDP Cell Sorter Laser Cytomation System + Optics Table Lab This system was rem (more)oved from a university where it was surplus to requirement. It is in good cosmetic condition, the working condition of each unit that we were able to test is listed below. Parts of the system:- Optics Table - MoFlo Optical BenchSN - 2086Dimensions - L153 W122 H80.5cmMeasurement - Imperial Parts fitted on table:- Pressure Console UnitSN - 2086 Coherent SapphireModel - Sapphire LP USB CDRH Driver Unit w/displayPN - 1189089SN - LDP.1189089.C02070- Powers on Coherrent Sapphire 488-200 CW CDRHPN - 1137970SN - LDP.1137970.521683Heatsink Sapphire LP RoHS compl- NOT TESTED Coherrent CubePN - 1170509SN - C20010803- NOT TESTED Coherrent CubePN - 1193821/AASN - C14070901- NOT TESTED Hamamatsu Parts:-H957-27 (No.T0050)H957-18 (No.K0149)H957-27 (No.T3721)H957-25 (No.S0319)H957-25 (No.S0360)H957-25 (No.S0359)H957-25 (No.S0322)H957-25 (No.S0324)H957-27 (No.T0051)H957-27 (No.T0054)H957-25 (No.S0358)H957-25 (No.S0321)H957-25 (No.S0323) Smart Sampler 2 x Preamplifier UnitsSN - 2086 DTx Data Display 19" LCD w/TouchscreenBCI PN - B44222DTx PN - 90819SN - BCM0514F37003- Powers on via Miami MoFlo XDP Controller Under table units:- DTx BCI Miami MoFlo XDP ControllerDTx PN - 90692BCI PN - B20566DTx SN - BCM0915F44602- Powers on - When powered up, an error message reads 'OdinInstControl::connectMachine failed: AttachedInstrument::GetInstance:Repository had communication error!' Gast Vacuum PumpDOA-P501-BN- Powers on Intellipower UPSModel - IQ200V-C-DiAC-Isol-PFCSN - 2FKVDIFC5B15110524- Powers on Beckman Coulter Aerosol Evacuation System Buffalo Filter w/ PedalModel - 200-0179SN - 502135Has ViroSafe Filter fitted (PN-200-8166)- Powers on. 3 x 316L UM Alloy Products Corp Pressure Vessels:-SN - S533735-1-005 (2014)SN - S514233-1-011 (2010)SN - S507165-1-008 (2008) Other units:- Thermo Scientific Recirculating Water BathControl - C10 Type - 003-5009/SN - 1 08004133017Bath - K20 Type - 002-4276/SN - 08004052 003- Powers on Testing:-37˚c - Thermometer read 37.6˚c100˚c - Thermometer read 100.0˚c-20˚c - Thermometer didn't read lower than -13.5˚c Jun Air CompressorType - OF302-25MQSN - 0119802962- Powers on with compressor running Hours - 00898.3 Other spare bits:-1 x Black Case of various filters1 x Black Case containing 3 x Merlin Gerin fuses, Methanol &amp; Acetone2 x Sets of Spare Shaped Charged Plates (one pair boxed)1 x Box of Filters1 x Box of mixed size O-ringsRed Ethernet cable5 x IEC Extension cables

Beckman Coulter 6015 MET ONE 6000P Remote Airborne Particle Counter Lab This item was removed from a (more) university where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Also included are the following: Hammond Manufacturing metal Lockable case with vent holesP/N - SP2001942ST161608SS Modified Meissner Filtration ProductsCF2SM0.2-41B1S/N - Z8803493 Phoenix ContactKGG-MC 1,5/8 Euro &amp; USA Power Supply Cables.

This Amersham Biosciences IN Cell Analyzer 1000 was removed from a university lab where it was surpl (more)us to requirements. The system powers up and communicates with the PC and software, but it fails the Z drive test. It is in good cosmetic condition with minor marks. Included with it are; Nikon Eclipse TE2000-UObjective - Nikon Plan Fluor ELWD 20X/0.45 DIC L ∞/0-2 WD 7.4) Xenon Arc Lamp (Loose inside behind back panel)Bulb - OSRAM XB0-100-OFRSN - JJD-394-001 066 Inside Floorstanding unit:-Hamilton ControllerPN - 231352/00SN - 228 PC - HP Workstation xw4200 -Comes with Keyboard &amp; Mouse Manuals/Discs:-IN Cell Developer ToolboxIN Cell Investigator Toolbox V1.6IN Cell Analyzer 1000 User Training coursesIN Cell Analyzer 1000 Instrument Ediction V.3.2 RC3 CDAmersham Liquid Handling CD Also comes with:-Amersham Biosciences MultiTemp 3 recirculating Water BathCode no. 18-1102-78PN - 56-1165-34SN - 1200400269 009 Powers on, temperature tested at 37˚c, 90˚c (max) and -10˚c (min) - All working fine.

ULK 1002 FRYKA cooling recirculator The universal chiller for laboratory and industry, characterized (more) by its flexibility in various applications. A great economical alternative to running water cooling systems. The 9.5-liter tank allows for wide-ranging methods of use: when full, it ensures high temperature stability over time and, at a minimum, a rapid cooling system for the most immediate needs. The new modern space-saving design, low weight, innovative technical features with low-noise cooling unit, also make it suitable for direct use at the workplace. Energy efficient: - fan with EC technology Low noise level: - particularly quiet components - the fan adjusts its speed to the required value Easy to use: - integrated funnel - self-sealing hose connector with quick coupling - drain cock High quality components: - touchscreen controller with high quality glass screen and integrated digital flow and fill level indicators - components from renowned German manufacturers - refrigeration unit: completely hermetically sealed, air cooled, low maintenance High operational reliability: - thermal overload protection - dry-running protection - optical and acoustic alarm - error messages are displayed in plain text Proven standard: - MOD bus interface Technical features: Operation from -10°C to +40°C Control accuracy +/- 0.5K Cooling capacity in watts at +20°C 2300W; at +10°C 1600W; at -10°C 750W Circulation pump: flow rate 12 l / min Flow pressure: 2.9 bar External dimensions [LxWxH]: 35 x 44.5 x 94 cm Weight: 41 kg Ambient temperature from +12°C to +30°C Electrical connection: 230 V / 50 Hz Max current: 3.5 A Coolant tank from 2.5 to 9.5 l Fitting for 12 mm hose

ÄKTAxpress is a liquid chromatography system intended for automated, multi steppurification processe (more)s. The system has been developed and optimized for purificationof Histidine-tagged and Glutathione S-Transferase (GST)-tagged recombinant proteins from clarified or crude cell lysates. ÄKTAxpress supports a number of purification protocols containing up to four chromatography steps, for example, affinity chromatography followed by desalting, ion exchange, and gel filtration. Protocols for purification of both low expressed proteins and well expressed proteins are included. Also protocols supporting purification of double tagged proteins and protocols that can be combined with on-column and off-line (batch) tag cleavage are provided. ÄKTAxpress provides the following features: •Automatic purification of up to four samples in a single run. •Purification protocols containing up to four chromatography steps. •Automated on-column affinity tag removal in the first step of purification protocols starting with an affinity/ion exchange chromatography step. •Purification protocols supporting purification of both well expressed and low expressed proteins, double tagged proteins and proteins that have been cleaved off-line. •Up to 50 mg of protein can be purified per sample. •Up to twelve ÄKTAxpress systems can be run in parallel, controlled from one computer (not included). Different purification protocols can be run simultaneously. •The systems can be placed next to each other or they can stand separately if preferred. Flow rate: 0.1 – 65 mL/min Flow rate accuracy: ±2% or ±0.02 ml/min whichever is greater Flow rate reprocibility: RSD < 0.5% Pressure range: 0 – 30 bar Step gradients (quasi-isocratic mixing) formation conditions: Water based buffers with different concentrations of salts Gradient mmix proportions: 5 – 95% Concentration accuracy: ±2%B Linear gradients conditions: Water based buffers with different concentrations of salts Linearity: ±2%B within 20 – 80%B UV monitor wavelengths: 280 and 254 nm set by lamp position and filter Optical path length: 2 nm Opitcal cell volume: 2 µL Detector cell volume: 30 µL Absorbance range: 0.01 – 5 AU Auto zero range: -0.2 – 2.0 AU Linearity, deviation: < 3% up to 2 AU Static noise, short and long term: < 40 μAU Static drift: ±0.1 mAU/h Conductivity range: 0.01 – 300.00 mS/cm Accuracy: Max. ±2% of full scale calibrated range or ±0.1 mS/cm whichever is greater Reproducibility, short and long term: Max. ±1% or ±5 μS/cm whichever is greater Noise: Max. ±0.5% of full scale calibrated range, typically ±0.1% Response time: Max. 4 s (0–95% of step) Internal volume: 24 μl Dimensions (WxdxH): 250 x 490 x 660 mm Weight: 30 kg

PFEIFFER Turbomolecular TMP Vacuum Pump TMH 260 This was removed from a university lab where I was s (more)urplus to requirements. The unit has not been tested but is in good cosmetic condition with marks from use. The turbo fan blade moves freely and are in good cosmetic condition. DN 100 ISO--K, 2PMod - Nr PM P02 13019 pin DIN MALE connector port is in good cosmetic condition. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

This BECKMAN Model J2-21 Floor Standing Centrifuge was removed from a university lab where it was su (more)rplus to requirements. The unit is in full working order but is not supplied with a rotor. It is in reasonably good cosmetic condition but has cracks on the door hinge and latch.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7&rdquo; graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator&rsquo;s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Accuris Aspire Laboratory Aspirator The ASPIRE is an ideal choice for a wide range of laboratory asp (more)irating applications, including removal of media from tissue culture vessels or plates, and supernatants. An ergonomic, hand held controller is included, and holds standard 200 to 300ul disposable pipette tips. The hand held controller, and adapters are made of POM (Polyoxymethylene), and fully autoclavable. The Polycarbonate collection bottle incorporates a reliable Overflow Protection Valve that closes off the tube to the vacuum in the event of a full bottle. In addition, the replaceable in-line filter protects the vacuum pump from contaminants and any moisture that comes through the bottle. Graduations on the collection bottle indicate the amount of fluid collected and when it’s ready to be emptied. The Handheld Vacuum Controller has an ergonomic design that’s comfortable in the hand during prolonged use. Pressing the button applies the vacuum. The pipette accepts Pasteur pipettes, serological pipettes, and also comes with 2 accessory pipette cones. One cone is designed to accommodate 200/300ul pipette tips, the other has a thin, stainless steel capillary for fine control aspirating. INCLUDED: The Accuris Aspire Laboratory Aspirator includes: - Base with internal vacuum pump - 2 Liter, polycarbonate collection bottle - Antibacterial / hydrophobic filter - Silicone tubing - Handheld vacuum controller (A) - Adapter for 200ul pipette tips (B) - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty