MET ONE 237A Portable Airborne Particle Counter

This listing is for the Becton Dickinson FACSCalibur Flow Cytometer. It is being sold as the unit on (more) its own without cables or software, it needs its laser replaced, otherwise it is in full working condition.The Becton Dickinson FACSCalibur Flow Cytometer offers aunique approach to flow cytometry, allowing users to perform both cell analysisand cell sorting in a single system, providing flexibility for a variety ofresearch and clinical applications. The BD FACSCalibur is a fully integratedmultiparameter system that has the performance and sensitivity to ensureobjective and reproducible results through the use of dual-laser technology,interbeam compensation, and an alignment-free optical design. Efficientcollection optics, coupled to the flow cell with an optical gel, permit the useof a low-powered, air-cooled argon laser and a red diode laser to ensure thehigh sensitivity required for analysis of low-density antigens.

Photodiode array detector Waters 2996. Range of 190 to 800 nm. Optical resolution of 1.2 nm. Accurac (more)y of wavelength 1 nm. Includes manual. Specifications:

The Countess II Automated Cell Counter is a fully automated cell counter and assay platform that use (more)s state-of-the-art optics and image analysis algorithms to analyze trypan blue-stained cells in suspension. Processing time: ~15 seconds Sample concentration range: 1 x 10⁴ to 1 x 10⁷ cells/mL Particle/cell diameter range: 4 60 µm (particles), 7 – 60 µm (cells) Required sample volume: 10 µL Optics: 1 channel (brightfield) Camera: 5 Mega pixels, 2.5x Optical Magnification

Radwag laboratory holders have been designed to facilitate faster and more convenient weighing. They (more) ensure perfect and safe fixing of small vessels of typical and non-standard shapes. Features: Maximum weighing ergonomics Direct dosing of a sample into a vessel High efficiency, lower costs (minimized potential loss of samples during transfer) Direct dosing of samples into various vessels (test tubes, round flasks, flat flasks, plastic test-tubes, titration vessels) Laboratory holders are compatible with all Radwag analytical balances. Intended use: glass and plastic tubes - ø8, ø10 and ø12 mm

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Ohaus ISTHBLHTS Heated Thermal Shaker The Ohaus ISTHBLHTS Thermal Shakers is designed for applicati (more)ons that require consistent and precise results. With heating and shaking capabilities. These shakers use interchangeable blocks to accommodate a wide variety of tubes and microplates. The easy-to-use, 4.3", color, LCD touch screen allows the user to save and visibly track progress through the live status bar for five user defined programs, each with five individual steps. The unit's enhanced electronics and dual temperature sensors provide accurate, dependable temperature settings across the operating range with a temperature accuracy of ± 0.5° C between 20° C and 45° C; ± 2° C below 20° C and above 45° C. The ISTHBLHTS is designed for applications that require consistent and precise high-speed shaking with temperature control to 100° C. With heating and shaking capabilities, our shakers use interchangeable blocks to accommodate tubes and microplates. Intuitive LCD touchscreen allows the user to save and track progress of 5 user-defined programs, each with 5 individual steps. Enhanced electronics provide dependable temp. settings across the operating range. Program control capabilities allow user programmable operation for automated use and memory. Storage for five separate, 5-step programs, or unlimited if using the USB. Enhanced electronics provide accurate and dependable temperature settings across the operating range. The USB port allows for easily transferring test data to a flash drive for data logging and storage. Also ideal for program storage and performing software updates.Click Here to View Product Video INCLUDED: The Ohaus ISTHBLHTS Heated Thermal Shaker includes: - 1.5mL Block - Clear Rack - Cover - Hex Head Screwdriver - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISTHBLHTS Heated Thermal Shaker Specifications Temperature Range4° C above ambient to 100° CTemperature Accuracy± 1° C between 20° C and 45° C± 2° C above 45° CSpeed Range300 to 3000 rpmSpeed Accuracy± 2%Timer1 minute to 99 hours, 59 minutesOrbit3 mm (0.12")Cooling Rateabove ambient 2-3° C/min; below ambient 0.5-1.0° C/minHeating Rate5° C/minOverall Dimensions (L x W x H)10.25 x 9.75 x 5.2" (26 x 24.8 x 13.2 cm)Ship Weight11.9 lbs (5.4 kg)Request a Formal Quote

Dimensions (WxDxH): 600 x 490 x 430 mm

DNA Sequencer, automatically analyzes DNA molecules labeled with multiple fluorescent dyes. After sa (more)mples are loaded onto the system’s vertical gel, they undergo electrophoresis, laser detection, and computer analysis. Electrophoretic separation can be viewed on-screen in real-time, and final data can be output in a variety of formats. The 377 system accepts gel plates in four different lengths for flexibility in sample analysis. Computer and software not included. Performance / Throughput: Performance 900 bases with 98.5% accuracy Production-scale Throughput (lanes per day) 24-96 samples Physical Specifications Width 74 cm (29 in) Height 81 cm (32 in) Depth 52 cm (21 in) Weight 103.5 kg (230 lbs)