New Brunswick Scientific U570 -86 Ultra Low Temperature Freezer Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

New Brunswick Scientific U570-86 Ultra Low Temperature Freezer Lab This item was removed from a univ (more)ersity laboratory where it was surplus to requirements. The item powers on and is in a reasonable used cosmetic condition.It includes 4 shelves but has only 4 pegs, so only one shelf can be fitted currently. There are only two doors at the bottom. During testing, the freezer was set to its minium temperature of -86ºc, but would not drop below -19ºc.Therefore, it is listed as Spares/Repair and no further testing was conducted. Specifications:- Model: U570 -86 - Serial No.: 1004-5204-1103

New Brunswick Scientific Innova U725G Ultra Low-Temperature Freezer Lab U725 -86 This was removed fr (more)om a university lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition. Internal dimensions: L61 W87 H136cmIncludes 2 Shelves: 55 x 84cm The manual and keys are included.

Panasonic MDF-U55V Ultra Low Temperature Freezers ULT It is in good cosmetic condition and powers on (more), we are unable to test it further at our facility. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally.

Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply Transfer Area Up to 14 x 16 cm Maximu (more)m Power Settings 30 V, 500 mA, 15 W Maximum Gel Capacity 4 Mini Gels Features - Intelligent built-in power supply—prevents the stack from overheating by monitoring the transfer status - Requires minimal current—does not generate excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent build up of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE70XP Semi-Dry Transfer Unit with Built-In Power Supply is an innovative system designed for the rapid and efficient transfer of proteins from polyacrylamide gels onto nitrocellulose or PVDF membranes. Featuring an intelligent built-in power supply, the TE70XP monitors transfer status in real-time, automatically halting the process to prevent overheating of the stack. With a 14 x 16 cm transfer area, the TE70XP accommodates up to four mini gels in a stacked format, allowing for high-throughput transfers without compromising quality. This semi-dry transfer unit is equipped with durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent results. Vented electrodes prevent bubble buildup, enhancing the reliability of each transfer. Designed to minimize buffer requirements, the TE70XP reduces reagent costs and preparation time, making it a cost-effective solution for busy labs. Its robust construction includes a molded base with a platinum-coated titanium anode and a hinged lid with a stainless steel cathode, ensuring long-lasting performance. INCLUDED: The Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply includes: - Molded Base with Platinum-Coated Titanium Anode and Internal Power Supply - Hinged Lid with Stainless Steel Cathode - Blotting Paper (14 x 16 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (16.5 x 18.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Corepoint Scientific NSWDUF211JWJ-0 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 1 (more)15V Temperature Setpoint Range -50°C to -86°C Capacity 21 cu. ft. Defrost Method Manual Features - Five insulated inner doors - Microprocessor controller specifications - Touch pad keys and four line display for easy programming - Large LED temperature readout - Audible and visual alarms with silence key for audible alarms - Programmable high and low temperature alarm set points - Programmable access code to limit access to set points and controller configuration - Automatic voltage boost to compensate for low line voltages - Normally open, normally closed alarm contacts and 4-20mA signal available to connect to central alarm system - RS-232 serial output - Battery backup on electronics during power outages The Corepoint Scientific NSWDUF211JWJ-0 -50°C to -86°C Upright Ultra Low Temperature Laboratory Freezer, 115V, is engineered for demanding cold storage applications, providing safe storage for samples and reagents. This 21 cu. ft. capacity freezer features high efficiency and low noise operation, utilizing two compressors with a 300 BTUh reserve capacity. The interior is equipped with a triple gasket seal, vacuum relief port, five double-walled insulated inner doors, and four heavy-duty stainless steel adjustable shelves. The microprocessor controller offers touch pad keys, a large LED temperature readout, and both audible and visual alarms with a silence key. Programmable high and low temperature alarm set points and an access code limit access to set points and controller configuration. Additional features include automatic voltage boost for low line voltages, alarm contacts, a 4-20mA signal for central alarm system connection, RS-232 serial output, and battery backup during power outages. The temperature range is -50°C to -86°C. The exterior includes a cam action handle with a key lock and door switch for alarms, four heavy-duty swivel casters with locks, and CFC-free refrigerant. Made in the USA, this freezer is ideal for laboratories requiring ultra-low temperature storage. INCLUDED: The Corepoint Scientific NSWDUF211JWJ-0 -50C to -86C Upright Ultra Low Temperature Laboratory Freezer, 115V includes: - Key for Door Lock - 4 x Adjustable Shelves - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

4 adapters 3x15ml for SIGMA 13104 / 13117 buckets For SIGMA laboratory centrifuge with rotor 11133 F (more)or 4 x 3 Falcon tubes of 15ml

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

PEAK Scientific PH600 Precision Hydrogen Generator This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up but we were unable to test it further. It is in good cosmetic condition with marks from use. It is sold for spares/repairs due to the nature of the instrument and that it is untested.

CY10 scale’s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

RCT basic ETS-D5 Solution Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Setting a (more)ccuracy speed 10 rpm Features - Combines RCT basic magnetic stirrer with ETS-D5 contact thermometer. - Safety circuit limits max. temp. independently of set point. - Heating function switches off if temp. limit exceeded. - Set safety temp. of heating plate remains available. - Hotplate temp. displayed on RCT. - Contact thermometer display can be placed at eye level. The RCT basic ETS-D5 Solution consists of the RCT basic magnetic stirrer and the ETS-D5 electronic contact thermometer making experiments and reactions even safer. Improved temperature controlBy combining the two devices, the internal safety circuit, which is independent of the RCT basic software, can be addressed directly by the contact thermometer. For this purpose, the maximum permissible temperature in the medium is limited independently of the set point temperature. If this value is exceeded, the heating function of the magnetic stirrer switches off via the internal safety circuit - until the device is restarted. At the same time, the stirring function is maintained to avoid boiling distortions. The set safety temperature of the heating plate also remains available. The set temperature limitation of the ETS-D5 and the safety temperature of the hotplate are OR-linked. This means that every potential error leads to the heating being switched off. In addition, the temperature of the heating plate can be set independently of the medium. In this way, you actively influence the heating times. Improved displayWith the ETS-D5, you also enhance the display of your magnetic stirrer. You can see the set and actual value of the medium temperature at a glance with a resolution of 0.1 K on the contact thermometer. The setting accuracy is also refined from 1 K to 0.1 K in this combination. The current hotplate temperature is also displayed on the RCT. Another plus: The display of the contact thermometer can be placed at eye level. This makes it directly visible where the temperature is measured and controlled. In addition to the magnetic stirrer and contact thermometer, the complete solution also includes all the necessary mounting elements.INCLUDED: The RCT basic ETS-D5 Solution includes: - H 16 V Support rod - H 44 Boss head clamp - Screw driver - ETS-D5 - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - RCT basic - Manufacturer's Documentation - 2 Year Manufacturer's Warranty