Powertecnique Uninterruptable Three-Phase Power Supply & Battery Box Lab

This listing is for a AEG UCR Battery Charger. The unit is in full working condition and is ready f (more)or immediate release. AEG UCR Battery Charger Overview The AEG UCR Battery Charger is specifically designed for charging AEG batteries within the voltage range of 2.4 V to 12 V, making it ideal for AEG cordless power tools. Key Features: Voltage Compatibility: Charges batteries from 2.4 V to 12 V, ensuring compatibility with a wide range of AEG tools. Dedicated for AEG Cordless Tools: Tailored specifically for AEG power tools, ensuring optimal performance. Availability: Ensures the charger matches AEG batteries seamlessly. Next Day Delivery

This listing is for a Trust 1000VA UPS. The unit is in full working condition and is ready for imme (more)diate release. The Trust 1000VA UPS is a compact and dependable uninterruptible power supply designed to protect your electronic devices from power interruptions and fluctuations, ensuring continuous operation. Key Features: Compact Design: The UPS is designed to save space while delivering robust performance, ideal for home offices, small businesses, or IT setups. Power Capacity: 1000VA Rating: Provides a maximum power rating of 1000VA, which is suitable for most computer systems, networking equipment, and peripherals. Surge Protection: Equipped with 3 surge-protected IEC power outlets, it safeguards connected devices from voltage spikes and surges, enhancing the longevity of your equipment. LED Indicators: Green LED: Indicates normal operation when connected to utility power. Yellow LED with Sound: Alerts users to a loss of utility power. Red LED with Sound: Signals an error, such as: Overloading: Connected devices draw more power than the UPS can support. Battery Life Warning: The battery may be nearing the end of its useful life (typically 2-4 years). LCD Display: An easy-to-read LCD provides real-time information on: Input and output voltage Power line status Battery health, allowing users to monitor the UPS performance at a glance. Smart Management Function: The UPS features a smart management function that enables automatic shutdown of connected devices during a mains power outage when connected via USB, preventing data loss and hardware damage. Additional Protection Features: The UPS includes an RFI filter, surge protection, and Automatic Voltage Regulation (AVR), which stabilize voltage fluctuations, ensuring reliable operation. Also provides modem/fax/phone protection to safeguard communication lines. Included Accessories: Comes with a detailed user’s guide and wall power connection, facilitating quick setup and user understanding.

This listing is for a APC SURT1000XLI Smart-UPS.The unit is in full working condition and is ready f (more)or immediate release.The APC SURT1000XLI Smart-UPS is an advanced uninterruptible power supply (UPS) designed to safeguard your critical electronic devices from power outages and voltage fluctuations. Engineered for reliability and efficiency, this UPS ensures that your systems remain operational during unexpected power interruptions, providing peace of mind for both home and office environments.Key Features:Reliable Battery Protection: Equipped with the RBC31 battery, the SURT1000XLI features a sealed lead acid, valve-regulated (VRLA) AGM battery that requires no maintenance. The battery boasts a lifespan of 5 to 10 years, ensuring long-lasting performance.Efficient Power Specifications: The Smart-UPS RT 1000 provides a robust 700W output power with an input voltage of 230V, making it suitable for a range of electronic devices, including servers, networking equipment, and other critical components.Physical Specifications:Compact Design: The UPS features a 2U case size and measures 432 x 85 x 483 mm, allowing it to fit into standard racks with ease.Weight: Weighing 29 kg, the robust design ensures stability and reliability in demanding environments.Socket Configuration: Includes 6x IEC 320 C13 sockets and 2x IEC Jumpers, offering ample connectivity for multiple devices.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. Accessories S6MT: UNEL 220V 6-position electrical multiple socket with thermal protection. S6: UNEL 220V 6-position electrical multiple socket. RIPF60VL: perforated metal shelf (1 max). CFNUBL: activated carbon electric fan. For more information on the products and safety systems available, we invite you to our dedicated post 'LITHIUMSAFE'.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. Safety cabinet for lithium batteries CSF711/L LITHIUMSAFE CHEMISAFE, with accessories: 12-position electrical multiple socket; fire extinguisher with smoke detector.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Waters 2465 Electrochemical Detector combines sensitivity, reliability and simplicity for HPLC e (more)lectrochemical detection. Its versatile detection modes are ideally suited for analyzing a wide range of compounds. The Waters 2465 Electrochemical Detector’s multiple flow-cell configuration combines working and reference electrode designs to minimize cost and enhance flexibility. The flow cell accommodates several reference electrodes: ISAAC; traditional salt-bridge design, which limits air bubble formation; and Hy-Ref, which is ideal for carbohydrate analysis and is compatible with extreme mobile phases. Operating modes: DC, Pulse, and Scan Potential range: Between +2.00 and –2.00 V in 10-mV increments Autozero: Triggered by keyboard, rear panel contact closure, or RS-232C control Detector oven: Height 37 cm, temperatures from 7 °C above ambient to 45 °C, accuracy 0.5 °C, stability 0.1 °C; accommodates HPLC column and flow cell Wetted materials: PCTFE, FEP, 316-SS (stainless steel), Viton, silver, silver chloride, gold, and platinum

Instron 5543 Single Column Table Top Tensile Tester System Spares/Repairs This was removed from a un (more)iversity lab where it was surplus to requirements. The unit did not power up in testing. It is sold for spares/repairs. Included are the following; Accessories.1x lockable tool chest with misc bit items inside.1x user manual 1x Materials testing quick guide (laminated)1x home made timer box (plug removed)1x Transducer unit

If you buy a High Resolution Scale PUE 7.1 by July 31, 2024, you will receive each of these products (more) along with a FREE lifetime license for the Workflow Module. High Resolution Scale The HRP high resolution scales feature a cutting-edge measuring system based on RADWAG MonoBLOCK® technology. It allows working with a readability of 1 g at a maximum capacity of 300 kg and 20 g at a maximum capacity of 2000 kg, with a repeatability of 3 g guaranteed. 9 advantages, 1 monobloc The ability to weigh loads up to 150 kg on a large pan with high readability and good repeatability, minimal eccentricity error over the entire range, fast and stable measurement (achievable within 1 second), stability of parameters over time and after transport, and a pan dimension adapted to the scale’s readability – all this is the result of using a measurement system based on improved technology. Repeatability not repeatable by others Automatic adjustment with an internal weight not only guarantees the best quality of work and repeatability of results, but also saves time and provides comfort. The HRP high resolution scales feature a cutting-edge measuring system based on RADWAG MonoBLOCK® technology. It allows working with a readability of 1 g at a maximum capacity of 300 kg and 20 g at a maximum capacity of 2 000 kg, with a repeatability of 3 g guaranteed. For such industries as pharmaceutical, chemical, food and… HRP scales are ideal for industrial conditions where high readability and repeatability of measurement are required, such as in the pharmaceutical, chemical and food industries. Choose a terminal HRP high-resolution scales can work with one of two industrial terminals: PUE 7.1 and PUE HY10. The PUE 7.1 terminal has: 5.7-inch color resistive display a touch-sensitive keyboard ABS plastic housing IP 43 protection rating communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, Wi-Fi®, optional additional modules: additional A/D converter module DP6. The PUE HY10 terminal features: 10.1-inch color graphic display touchscreen keyboard stainless steel housing IP 68/69 degree of protection communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, optional additional modules: Wi-Fi®, RS485, Profibus, Profinet, analog output module, 12 IN/ 12 OUT. The power of steel The use of stainless steel for weighing pan construction guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the HRP high-resolution scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Use the potential Barcode scanners, receipt printers, label printers or additional displays – thanks to multipurpose software, PUE 7.1 scale can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations, differential weighing, labelling, peak hold and statistics. The power of PUE 7.1’s working mods.

The MPS R device comprises electromagnetic MPS module and R touch panel featuring 5.7” display (more). It has been designed to be integrated into weighing systems already owned by the customer. Compact design plus integrated electronics make MAS module easy to be adapted into technological lines and built inside customer-owned devices. It is possible to perform the measurements using the under-pan weighing method wherein the load is suspended beneath the module or a regular weighing pan. Due to high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MPS module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 g, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The module has been equipped with RS232 and USB type B interfaces. Dedicated freeware software, R Panel, has been designed to enable control of the module via a computer. It provides access to all the keys and functions available directly from the operation panel, e.g. taring, zeroing, setup, etc. An innovative algorithm for automatic search of electromagnetic weighing modules is a guarantee for a remarkable ease of connection of a module to a computer. With R Panel software, the complete functionality of R series balances is available via PC. R Panel functionality has been implemented in RLab program as one of its numerous functions. MPS.R can also be integrated with E2R Weighing Records and E2R PGC.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.