Underbench safety cabinet for lithium batteries LITHIUMSAFE CHEMISAFE

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. CONSTRUCTION - Entirely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. - Special insulation for high temperatures (800°C) with high density 300 Kg/m3 calcium silicate and mineral fiber panels (Fibroceramic free) fixed with ceramic adhesives. - Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. ACCESSORIES Q120: QUARANTINE PATENTED extinguishing system with tank for 120 model. LSSA: automatic fire extinguisher. LSCR: automatic fire extinguisher with control panel, smoke and temperature sensor, beacon. CEGSM: GSM dialer. S6MT: UNEL 220V 6-position electrical multiple socket with thermal protection. S6: UNEL 220V 6-position electrical multiple socket. S12: UNEL 220V 12-position electrical multiple socket. RIP120LS: perforated shelf for 120cm cabinets. INTAKE SYSTEMS DIAM125BP: electric aspirator. CSF100BPAMY11: ATEX electric fan. CFN: molecular aspiration system certified according to standard NFX15-211. Per ulteriori informazioni sui prodotti e i sistemi di sicurezza disponibili, ti invitiamo al nostro post dedicato "LITHIUMSAFE".

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. AUTOMATIC FIRE EXTINGUISHER The automatic fire extinguishing system works by detecting the presence of fire and controlling the discharge of extinguishing media so that the damage caused by the fire is minimized. The automatic extinguishing system includes a fire detection system, an extinguishing control unit and condensed aerosol generators. Information on the front panel display facilitates programming and simplified use. The possibility of programming the delayed activation of the sirens, or the time and duration of the extinguishing system make the unit very efficient and flexible. HOW DOES IT WORK? In the event of a lithium battery fire, the automatic fire extinguisher suppresses the fire and neutralizes the decomposition products of the electrolyte such as Hydrogen fluoride (HF), forming stable products such as KF and KHF2. The neutralizing action prevents the formation of highly flammable gases, such as hydrogen (H2), bringing the internal temperature down below the threshold necessary for a new fire to break out. Constituent parts of the fire fighting system: - LPCB certified according to EN 12094-1 and EN54.2 and 4 - Fire detection and automatic extinguishing - Graphic display 128 x 64 pixels - Fire extinguisher button on front of unit - Key switch for switching off mode selection: manual only or manual and automatic - 3 siren outputs - Power supply with 3A - Low absorption at rest: only 40mA - Inputs and outputs for remote function control - Extinguishment stop button and extinguishing cancel button - Storing of data events - RS-485 for remote connection In the image, the focus on the internal FBN fire extinguisher, in the double door model. Recommended accessories: - Charging points: 4x6 sockets. Contact us for more information.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. CONSTRUCTION - Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. - Special insulation for high temperatures (800°C) with high density 300 Kg/m3 calcium silicate and mineral fiber panels (Fibroceramic free) fixed with ceramic adhesives. - Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CARATTERISTICHE - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass plug. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges CHEMISAFE QUARANTINE SYSTEM Thanks to this patented system, in the event of a fire inside the safety cabinet, an automatic response will be activated to overturn the shelves, thus allowing the batteries to fall into a water tank located at the bottom. By immersion, the fire will be promptly extinguished and the potential risk of self-ignition will be effectively neutralised. Simple and very effective system! The cabinet is equipped with a water pump and algaecide. The QUARANTINE versions have only 3 shelves instead of the basic 4. Demonstration video of the QUARANTINE system.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).

KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump Flow Rate Range 1 to 100 ml/min  (more)Programmable Dosing 1 to 999 ml Maximum Suction Height 3 mWg Features - Small footprint - Simple, intuitive operation - Manual, analog control - Self-priming, can run dry - Consistent, reliable flow rate - Simple calibration - Cycle mode - Adaptable to fluid characteristics - Start/Stop through logic control (TTL) - Reset/Prime through logic control (TTL) - Output signal fault alarm The KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump is liquid dosing/metering diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Equipped with manual, analog, and RS-232 controls with LCD graphic display. INCLUDED: The KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump includes: - Connection Kit (Hose and Screw-in Fittings) - Remote Control Cable - Filter - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark BenchRocker 3D Nutating Shaker The BenchRocker 3D is designed to provide the precise speed (more)s and tilt angles required for a broad range of molecular and biological mixing applications. The user can adjust both parameters to match the vessel size and the volume of liquid being mixed, yielding optimum results. Proprietary InstaTilt technology means no tools, no disassembly. Simply grip the platform with two hands and move to the desired position. This model includes both flat and dimpled (autoclavable) mats for mixing a wide variety of tubes and other vessels. Stacking platforms can be purchased as accessories, effectively doubling the usable surface area of each model. BenchRocker 3D features a maintenance free, brushless motor, capable of loads up to 4.4 lbs and is safe for use in cold rooms and incubators. INCLUDED: The Benchmark BenchRocker 3D Nutating Shaker includes: - 12 x 12 inch Dimpled Mat and Flat Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty