LITHIUMSAFE 110UB CHEMISAFE

12 x Schmersal Non-Contact Safety Switch w/ Cables & SD-Y Adapters Lab These items were removed  (more)from a university where they were surplus to requirement. All items are in very good cosmetic condition and untested. This listing comprises: 6 x Schmersal RST 36-1Part#: 101213820 1 x Schmersal RSR 36-D-R-STPart#: 101213956 5 x Schmersal RSR 36-D-S7Part#: 101213954 14 x SD-Y-ADAPTER 9152/2781406 2 x Small Cable AL-WAK8-2, 5-AL-WAS8/S370/S4000 8057201 9242/2797213 9 x Medium Cable AL-WAK8-1,5-AL-WAS8/S370/S4000 8057200 0225/3159235 16 x Large Cable AL-WAKA-0,5-AL-WAS8/S370/S4000 8057197 8311/2457690

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. AUTOMATIC FIRE EXTINGUISHER The automatic fire extinguishing system works by detecting the presence of fire and controlling the discharge of extinguishing media so that the damage caused by the fire is minimized. The automatic extinguishing system includes a fire detection system, an extinguishing control unit and condensed aerosol generators. Information on the front panel display facilitates programming and simplified use. The possibility of programming the delayed activation of the sirens, or the time and duration of the extinguishing system make the unit very efficient and flexible. HOW DOES IT WORK? In the event of a lithium battery fire, the automatic fire extinguisher suppresses the fire and neutralizes the decomposition products of the electrolyte such as Hydrogen fluoride (HF), forming stable products such as KF and KHF2. The neutralizing action prevents the formation of highly flammable gases, such as hydrogen (H2), bringing the internal temperature down below the threshold necessary for a new fire to break out. Constituent parts of the fire fighting system: - LPCB certified according to EN 12094-1 and EN54.2 and 4 - Fire detection and automatic extinguishing - Graphic display 128 x 64 pixels - Fire extinguisher button on front of unit - Key switch for switching off mode selection: manual only or manual and automatic - 3 siren outputs - Power supply with 3A - Low absorption at rest: only 40mA - Inputs and outputs for remote function control - Extinguishment stop button and extinguishing cancel button - Storing of data events - RS-485 for remote connection In the image, the focus on the internal FBN fire extinguisher, in the double door model. Recommended accessories: - Charging points: 4x6 sockets. Contact us for more information.

HOW DOES 'QUARANTINE' WORK? 1 - A fire breaks out inside the safety cabinet. 2 - The automatic syste (more)m overturns the shelves and slides the batteries stored in the cabinet into a tub. 3 - Inside the water tank the batteries are placed in a sort of quarantine which will not only definitively extinguish the fire but also exclude the possibility of self-combustion. ACCESSORIES Electrical sockets are not standard. Contact us for your custom configuration.

Bespoke Purpose Built Laboratory Autoclave Room This is being sold on behalf of a client. It is surp (more)lus to requirements. The unit is in good working order, but will need to be dismantled on site by a potential buyer. The class 1 cabinet is included in the sale. The system is located in Alnwick, Northumberland. Any potential buyer will need to be able to dismantle the system for removal. It is going to need a lot of building work to be demolished, supported and reinstated for the removal. Also the water mains etc. The unit is mounted to the floor but has extensive pipework that goes approximately 4-5 feet below ground.  The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

BioMat 2 Class II Microbiological Safety Cabinet with Ducted Exhaust on Stand This item was removed  (more)from a university where it was surplus to requirements. The cabinet is in good cosmetic condition and includes a steel stand measuring 113 x 60 x 83 cm (w x d x h). The unit powers up and is in good working order. A strong airflow was observed, and the inflow needle indicator reached the green safe zone during operation. Interior power sockets were tested and are functional. (Socket tester not included.) It's been regularly serviced, with its most recent being on: 22.04.24 Specifications: - Serial No.: MC5765/1 - Exhaust outlet: 20 cm diameter duct connection - Formalin vaporiser external tank Notes: - The fan control button is missing its outer diaphragm, but is operational. - No UV function included.

Gilson FC203B Fraction Collector w/ Diverting Valve, 110/220VFeatures - Collect fractions by time, d (more)rop, or peak to suit all your LC applications - Choose the compact FC 203B for small-capacity collection or the FC 204 for large volumes and capacities - Accept a wide variety of collection vessels, including microplates, microvials, and tubes - In peak mode, collectors monitor a detector signal and identify peaks using either an adaptive-slope algorithm or a specified millivolt threshold - Up to 10 programmable time windows can be added for collecting only what you want, while discarding the column’s void volume, peaks of no interest, and equilibration volumes - Operate as stand-alone instruments with an easy-to-use keypad, or can be controlled through your PC via TRILUTION® LC Software - 3-way diverter valve prevents contamination of collected fractions (standard on the FC 204, optional on the FC 203B) The FC 203B Fraction Collector is an essential tool for low-pressure chromatography and fractionation systems. With its versatile design, it holds one rack and can accommodate various sample configurations, including up to 128 fractions in 12x75mm tubes or up to 105 fractions in 13x100mm tubes. Additionally, it can collect samples in a shallow- or deep-well microplate format. The FC 203B is available with or without a diverter valve, providing flexibility based on experimental needs. For enhanced efficiency, an optional multicolumn adapter is available, allowing collection from up to 8 separate channels simultaneously. INCLUDED: Gilson FC203B Fraction Collector w/ Diverting Valve, 110/220V includes: - Gilson FC203B Fraction Collector w/ Diverting Valve - User's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The PS.X7 series represents a new advanced level for precision balances. The X7 series balances feat (more)ure the latest generation capacitive display providing the maximum comfort of use, available right at your fingertips. Ease of operation, clear menu and practical arrangement of the display guarantee the best ergonomics for your everyday tasks. A wide array of available interfaces facilitate selection of the most optimal means for communication. Personalization taken to the next level The X7 is the only balance available on the market that provides a user with the option to design display using wide selection of widgets. Customised display of X7 series offers direct access to the results of your work and other important information directly from the home screen. The X7 series balances offer unlimited possibilities for cooperation with external devices, providing printing, copying, archiving and data transfer. Built-in IR sensors allow numerous operations (e.g. tarring, transmitting the result to a printer or selecting successive steps of a particular process, etc.) to be performed handsfree, by simply moving a hand across the sensor. The housing is made of plastic, and the pan is made of stainless steel. Databases in X7 series balances In new PS.X7 series balances the information system is based on 7 databases which allow several users to work with database storing several products. The registered weighing results can be subject to further analysis. The data is registered in 7 databases: Users (up to 10 users), Products (up to 5 000 products), Weighments (up to 50 000 weighments), Packaging (up to 100 packaging types), Formulas (up to 100 formulas), Clients (up to 1000 clients), ALIBI memory (up to 512 000 weighments). The X7 series features option of making reports on formulas (up to 500 reports). Weighing Data Management USB interface facilitates quick transfer and copying of any results of your work (measurements, reports, databases) to other balances. Network management of the weighing data increases effectivity, productivity and safety of the important data to the maximum. ALIBI Memory The X7 series balances feature ALIBI memory that is a warranty for safety and automatic recording of your measurements. Options such as data preview, copying and archiving are available to users as well. The ALIBI memory allows to record up to 500 000 weighment records. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Shimadzu SPD-M10A Diode Array Detector (DAD). Light Source: D2 lamp, W lamp, or both (3 modes). Wave (more)length Range: 190 – 800 nm. Wavelength Accuracy: 1 nm. Noise Level: 0.8 x 10-5 AU (250 nm, 600 nm). Drift: < 1 x 10-3 AU/hr (250 nm, 600 nm). User manual.