Radwag MPS 6000.R Weighing Module

Grant Instruments BTA Dry Block Heating System for 24 tubes Easy and precise temperature setting Hea (more)ting range ambient + 5degC to 100degC, with rapid heat-up time Stability and uniformity +/- 0.1degC Capacity : 24 tubes of 15ml Compact, sturdy design

A programmable laboratory oven with multiparametric microprocessor with the possibility of memorizin (more)g 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 300°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable OVEN STF-NR FALC

A laboratory oven with forced ventilation and an exceptional quality/price ratio! 100% Made in Italy (more) and with all accessories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:    - External structure in steel painted with anti-acid epoxy powder    - Inner chamber in 18/8 stainless steel    - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 300°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory Oven STF-F 52 FALC Forced Ventilation

Thermo Electron RVT4104 Refrigerated Vapor Trap Lab This item was removed from a university where it (more) was surplus to requirement. It is in good cosmetic condition and working order. (Thermometer not included.) But needs a lid to function correctly. Ours is missing. Does not include a vapor trap lid.

Beckman Coulter Biomek NXp Automated Liquid Handler with PC & Software Lab This was removed from (more) a university lab where it was surplus to requirements. The unit is in reasonable cosmetic condition. It does have various marks and signs of general use.The robot is able to be 'homed' fine and it responds to commands via manual control. The Tiploader also works as it should. This and the gripper require an air compressor which is not included. We used one from stock to test it. The system consists of: 1 x Beckman Coulter Biomek NXp Robot.s/n A318410173.Cat No A31841.96 Well head. 1 x Beckman Coulter Tiploader. 1 x Beckman Coulter AccuFrame. 1 x Microscan MS-3 Laser (Barcode Reader) 1 x Dell Optiplex 380 PC with monitor, keyboard & mouse.This PC is fitted with the HDD from the original Lenovo PC. The PC has the Biomek NX software installed. Version 3.3 build 14.

The series of MUYA electromagnetic high resolution modules is designed to be incorporated into custo (more)mer’s weighing systems. A new generation’s MUYA 2 ultra-microbalance module is designed to fulfill our customers’ high expectations regarding mass measurements carried out with the greatest precision. The system of internal adjustment improves the quality of work even more by affecting measurements results. Operation of MUYA electromagnetic high resolution module is based on an electromagnetic digital converter. Compact design and inbuilt electronics ensure great possibilities when it comes to module's adaptation capabilities. Due to high precision of a measurement it is recommended to build the module into the customer's device (e.g. anti-draft chamber), thus limiting ambient conditions influence. Power supplier for MUYA weighing module comes standard.

LMS MCF-2360 Mini Laboratory Centrifuge New equipment in its original packaging Fixed angle rotor fo (more)r 6 tubes of 1.5/2.0 mL SPECIFICATIONS Speed ​​(rpm/g): 6,600/2,200 Capacity: 1.5/2.0 ml x 6 tubes Dimensions (mm): 126(W) x 138(D) x 100(H) Power: 100-220VAC 50/60Hz Weight: 0.9kg

A&D Weighing Apollo GX-224AE Analytical Balance, 220 g, 0.1 mg Capacity 220 g Readability 0.000 (more)1 g Repeatability 0.0001 g Features - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Easily determine the minimum sample size to reduce waste and increase savings, plus alert users to ensure USP41 compliance - Simplify your daily precision check and SOPs with the standard deviation function - Set up repeatability testing and run automatic precision checks without external weights using Electronically Controlled Load (ECL) management - Reduce errors and damage with impact shock detection and overload protection - Eliminate static disturbance of samples with available fanless / touchless ionizer - The GX-AE series includes a touchless IR switch that activates the ionizer for a specified duration - Six simple and straightforward keys - A quick toggle to change between USB and RS-232C communication - Easily level the balance (even with gloves on!) the illuminated, front mounted level - Features a connector for integrating an external infrared sensor, facilitating touch-free operations and improving lab safety - Automatic self-calibration and one-touch internal/external calibration ensure valid results - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-224AE Analytical Balance ensures high-precision measurements with a capacity of 220 g and a readability of 0.0001 g. This balance features a fanless ionizer, standard in AE models, which effectively neutralizes static charges without physical contact, ensuring disturbance-free weighing. Additionally, it comes with an external IR sensor that facilitates precise and convenient measurements by enabling users to interact with the balance without direct contact, thus maintaining cleanliness and accuracy. Its Electronically Controlled Load (ECL) management allows for repeatability testing and automatic precision checks without the need for external weights, further enhancing the reliability of measurements. The balance is designed with a fast stabilization time of approximately 2.0 seconds, making it ideal for high-throughput environments where time and accuracy are paramount. This advanced analytical tool simplifies daily operations and compliance with USP41 standards by alerting users when sample sizes are below minimum weight, which minimizes waste and maximizes efficiency. The balance's impact shock detection and overload protection systems safeguard the unit from accidental damage, ensuring long-term reliability and consistent performance. Additionally, operational simplicity is achieved through six straightforward keys and a quick toggle function that allows seamless switching between USB and RS-232C communications, catering to various laboratory data management systems. Further enhancing its usability, the GX-224AE is equipped with an illuminated, front-mounted level for easy leveling even when wearing gloves, and it offers both automatic self-calibration and one-touch internal/external calibration to guarantee valid results. The balance's extensive range of measurement units and its ability to perform percent calculations and piece counting adds to its versatility, making it suitable for a wide range of scientific applications. With its robust design and advanced features, including the supplemental IR sensor, the A&D Weighing Apollo GX-224AE Analytical Balance is a superior choice for professionals seeking precise analytical capabilities. Backed by a five-year warranty, it delivers both quality and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-224AE Analytical Balance, 220 g, 0.1 mg includes: - Touchless IR Switch - External Key Jack - Large Glass Breeze Break with Built-in Fanless Ionizer - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform in mild steel powder coated version. The HY10 series scales features mild steel powder coated construction with stainless steel weighing platform. The terminal PUE HY10 series features a 10,1” colourful touch screen display, keyboard with numeric and function keys. The scales enable cooperating with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series are offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

KNF LIQUIPORT IP65 NF 1.300 FT.18RC Diaphragm Liquid Transfer Pump Flow Rate Range 0.5 to 3L/min Ma (more)ximum Pressure 4 bar Maximum Suction Height 3 mWg Features - Small footprint - Simple, intuitive operation - Manual and remote control - Self-priming, can run dry - Maintenance-free - Equipped with brushless DC Motor - Integrated overheating protection The KNF LIQUIPORT IP65 NF 1.300 FT.18RC Diaphragm Liquid Transfer Pump chemically resistant liquid transfer diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Equipped with manual and analog controls. INCLUDED: The KNF LIQUIPORT IP65 NF 1.300 FT.18RC Diaphragm Liquid Transfer Pump includes: - Barbed Fittings for Tubing ID 12 mm - External Control Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Branson Exponential horn 1/2 in dia. Tapped Disruptor horn, exponential, 1/2″ diameter, tapped, uses (more) flat tip part # 101-148-024, for use with Branson SFX250, SFX550, S250A, and S450A sonifiers; used for applications requiring the compressing of solids such as powders and tissue. INCLUDED: The Branson Exponential horn 1/2 in dia. Tapped includes: - Manufacturer's Documentation Request a Formal Quote