Perkin Elmer PYRIS Diamond DSC Differential Scanning Calorimeter & Autosampler

Beckman Coulter Biomek NXp Laboratory Automation Workstation Spares/Repairs This was removed from a  (more)university lab where it was surplus to requirements. The unit is sold for spares/repairs. It is not in running order.

Agilent Technologies 6850 Network GC System with Atas Programmable Injector This system was removed  (more)from a university lab where it was surplus to requirements. The system is in fair cosmetic condition and powers on. However, no further testing was conducted as there is no PC or software available to operate the units. The previous owner reported no known faults but noted that the system has been out of use for several years and would likely need recommissioning. Specifications: - Agilent Technologies 6850 Network GC System - Serial No.: 6850-CN10750008 - Atas Programmable Injector - Serial No.: 36083

This item has just arrived in our stock. Please enquire for further details.

Beckman Coulter Biomek NXp Automated Liquid Handler with PC & Software Lab This was removed from (more) a university lab where it was surplus to requirements. The unit is in reasonable cosmetic condition. It does have various marks and signs of general use.The robot is able to be 'homed' fine and it responds to commands via manual control. The Tiploader also works as it should. This and the gripper require an air compressor which is not included. We used one from stock to test it. The system consists of: 1 x Beckman Coulter Biomek NXp Robot.s/n A318410173.Cat No A31841.96 Well head. 1 x Beckman Coulter Tiploader. 1 x Beckman Coulter AccuFrame. 1 x Microscan MS-3 Laser (Barcode Reader) 1 x Dell Optiplex 380 PC with monitor, keyboard & mouse.This PC is fitted with the HDD from the original Lenovo PC. The PC has the Biomek NX software installed. Version 3.3 build 14.

Beckman Coulter Biomek NXP Lab Automated Workstation With PC, Software, Tips This was removed from a (more) university lab where it was surplus to requirements. The lab confirmed that although it was installed in 2011, it had never been used once and is essentially brand neIt is in good cosmetic condition with minor marks from use. The system includes: Biomek NXP WorkstationSerial No. A318410608 Beckman Coulter FX Device ControllerCat No. 719366Serial No. 00717635AM0718110002 Beckman Coulter AccuframeSerial No. 00717820AG0711110001 ThinkCentre PC with Windows 7Serial No. 1S5852BL2MJWLDN9 Software:Biomek System Install Disk v3.3Beckman Coulter Sami Workstation Software v4.0Beckman Coulter Recovery DVD MORBK29ABiomek Tutorials v3.3Accounts and Permissions v3.1 Additional parts/Accessories:2 x Manuals Biomek NX and NXP v3.3 Tutorial1 x Active Curtain test rodBeckman Coulter P200 pipette tips 340 racks (96 tips/rack) in sealed boxes1 x Roylan Developments StoragePod Dundee serial No. 000224 15 x 14 x 40cm1 x complete front polycarbonate safety screen kit with all parts and fixings10 x data leads120 x 96 well plates, chimney well TC with lids5 x workstation table fittings9 x microplate holders1 x pipette exchanger holder12 x ferrite cable noise reducers

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Ultramicrotomo Leica UCT 125. Manufacturing machine knives, table vibration, glass for the manufactu (more)re of blades, and support to make knives. Manual included in attachment. Specifications: - The ultramicrotomo is an instrument commonly used to prepare samples for TEM. Use a glass knife or diamond for cutting ultra-thin sections of specimens included epoxy. - The sections are approximately 60 to 100 nanometers in thickness and 0.5 to 3 mm in width. Were mounted on grids TEM for viewing. - The ultramicrotomo is also used to create a surface mirror-smooth on samples mounted in epoxy, applications for which include images secundariias in the SEM and nanoindexación.

Pfeiffer OmniControl 200 Vacuum Controller with PKR 361 Gauge, 40 CF Measurement Cable 3m Flange DN  (more)40 CF-F Measuring Method Pirani; Cold cathode Features - Efficient 3 m measurement cable length for optimal setup flexibility - Durable Anode: 130727 for long-lasting performance - ActiveLine Full Range Gauge: PKR 361 / DN 40 CF-F Conflat for top-tier accuracy - Easy to read 3.5 in. display ensures simplicity of operation across users - Operating temperature range of 0 to 50°C for reliability in a variety of environments - Compatible PKR 361 Gauge has a measurement range of 1x10-9 The Pfeiffer OmniControl 200 Vacuum Controller with PKR 361 Gauge, 40 CF delivers precision and reliability with a 3-meter measurement cable for flexible setup and a durable Anode 130727 for extended performance. Utilizing advanced Pirani and Cold Cathode measuring methods, it features an ActiveLine Full Range PKR 361 Gauge and a DN 40 CF-F flange for superior accuracy. With a user-friendly 3.5-inch display and an operating temperature range of 0 to 50°C, it offers versatility and ease of use in various applications.INCLUDED: The Pfeiffer OmniControl 200 Vacuum Controller with PKR 361 Gauge, 40 CF includes: - Full Range PKR 361 Gauge - Measurement Cable - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson PIPETMAN M Multichannel P12x300M BT Connected Pipette PIPETMAN M Connected is a Bluetooth ena (more)bled electronic pipette that offers accuracy and precision in both standard and repetitive pipetting modes. Requiring virtually no pipetting forces to aspirate and dispense samples, the PIPETMAN M Connected Pipettes help reduce pipetting fatigue and increase pipetting efficiency. The pipette interacts in real-time with TRACKMAN Connected, making planning and executing pipetting protocols faster, easier, and more reliable. The PIPETMAN M Connected Pipettes are available in 20 models covering a volume range from 0.5 µL to 10mL in single channel configurations, and 0.5 µL to 1200 µL in multichannel configurations. Accurate and Precise PipettingThe motorized piston allows for high pipetting reproducibility and accuracy in all modes. Associated with TRACKMAN Connected and its PipettePilot application, the PIPETMAN M BT Connected Series reduces the risk of human error by transferring verifiable pipetting parameters and commands in the pipette.Increased FunctionalityThe intuitive interface has five pipetting modes for a larger number of applications: pipette, repetitive, mix, reverse, and custom. Create and transfer up to 10 custom protocols from the PIPETMAN M Connected Software into your pipette. Bluetooth connection enables communication with TRACKMAN Connected and helps guide you through your protocol telling you where, when, and how much to pipette with real-time interactions.Simple and Comfortable to UseAspirate and dispense with one click of the push button and eject tips with ease. The lightweight and ergonomic design rests comfortably in your hand for maximum pipetting comfort.CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN M Multichannel P12x300M BT Connected Pipette includes: - 5V Power Supply with AC Adapter and Cable - Four Battery & Ejector Tags - Manufacturer's Documentation - Operator's Guide - 2 Year Manufacturer's Warranty

Eppendorf S-4-104 Swing Bucket Rotor with Plate Buckets The Eppendorf S-4-104 Swing Bucket Rotor wit (more)h Plate Buckets, is a centrifuge rotor designed for use with the Eppendorf 5810/R Series centrifuges. This rotor has a maximum speed of 3,900 RPM and a maximum relative centrifugal force (RCF) of 2,568 x g. It can accommodate a maximum capacity of up to 16 x Microplates or 4 x Deepwell Plates, making it suitable for a range of applications in biological, biochemical, and clinical research. Overall, the Eppendorf S-4-104 Swing Bucket Rotor with Buckets is a reliable and versatile centrifugation accessory that is ideal for high-throughput sample processing in laboratories. INCLUDED: The Eppendorf S-4-104 Swing Bucket Rotor with Plate Buckets includes: - S-4-104 Swing Bucket Rotor - 4 x Plate Buckets with Carriers - Full 1 Year Parts and Labor Warranty Eppendorf S-4-104 Swing Bucket Rotor with Plate Buckets SpecificationsMaximum Speed3,900 RPMMaximum RCF2,568 x gMaximum Capacity16 x Microplates or 4 x Deepwell PlatesRadius15.1 cmCentrifuge CompatibilityEppendorf 5810/R SeriesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Edwards nXDS10i Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases an (more)d bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. Click Here to View Product Video INCLUDED: The Edwards nXDS10i Dry Scroll Pump includes: - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty