CTC Analytics autosampler MN 01-00 PAL power supply

Interscience Spiral easySpiral Pro Automatic Spiral Plater This was removed from a university lab wh (more)ere it was surplus to requirements. The item powers on and appears to run through test sequences. The item is in a reasonable, used cosmetic condition with marks from use.

FluidX Perception Barcoded Tube Reader with Accessories This was removed from a university lab wher (more)e it was surplus to requirements. FluidX Perception Barcoded Tube ReaderPN - 20-4001SN - 5086-F834-FC-52BE-7245The glass side has a corner cracked off.Powers on via USB FluidX Scope USB ReaderPN - FLX-20-1003SN - 1003-1216-005Powers on via USB FluidX Intellicode Set up Software (Dongle) Version 9.2.1.918(R) Apart from the glass, the item is in good cosmetic condition. Other parts/accessories:- Torrey Pines RHB20SN - 40000081Holds 96 x 0.2mlPowers on Tubes/Racks1 x Rack - 96 x 0.7ml Thread Tube with 2D Code (68-0700-12N, 978102)1 x Rack - 24 x 6ml Jacketed PP Tubes (66-9201)Pack of 5 Racks (96 tubes per rack) 2D Coded (size not specified, pack is sealed)2 x Yellow Racks with 96 x 0.2ml tube holes1 x Blue Rack with 96 x 0.2ml tube holes1 x Yellow Rack with 24 x 2ml tube holes Computer Interface CableAC Adaptor

The Eppendorf CellTram Air 5176 Pneumatic Manual Microinjector utilizes air for pressure transmissio (more)n to guarantees clean and simple handling of a piston pump. Change in volume: 88 µl Adjustable total volume: 2,640 µl Max pressure: 20,000 hPa Dimensions: 175 x 60 mm Weight: 1.4 kg

The ETI-MAX 3000 is a fully automated microtiter plate analyzer performing the complete sample proce (more)ssing (sample pre-dilutions, sample and reagent dispensing, incubations, wash processes, plate transports) as well as the photometric measurement and evaluation. The instrument is controlled by Windows PC software. This software allows the user to process the pre-defined assays of DiaSorin as well as assays programmed by the user. The clear structure with intuitive user-guidance allows simple and quick operation of daily routine jobs as well as programming of user-specific assays. Liquid handling: 1 ml thinner Disposable tips: 300 or 1100 µl Pipette range: Simultaneous operation of 4 plates Precision (samples and reagents): CV < 8.0% at 10 µl, CV < 2.5% at 100 µl Level sensor: Electronic Clot detection: Yes Mixing: Yes (pre-dilution tube and microplate) Multipipetting: Yes (sample, control and reagent) Pipetting time samples: < 18 min/96 wells (100 µl/well) Pipetting time reagents: < 4 min/96 wells (100 µl/well) Carry-over: None Identification: Barcode scanner for primary vessels, controls and reagents, Barcode scanner for microtiter plates Tube: Diameter 10-16 mm, Height 55-100 mm Barcode type: 2/5 interleaved, UPC A & E, 2/5 IATA, 2/5 Industrial, EAN 8 of 13, Code 128, EAN 128, Pharmacode, EAN addendum, 2 of 5, Code-a-bar Capacity: Maximum 240 sample tubes Capacity: 4 separate incubators Temperature range: 5°C above room temperature to 50°C Accuracy: ± 1°C average of the plate Consistency: ± 0.7°C/whole plate Shaking: Lengthwise Capacity: Up to 4 wash buffers Wash head: 1 x 8 Pipette volume: 200 – 2500 µl/well, depending on the assay Precision: ± 5% CV at 300 µl Residual volume: < 2.5 µl in round-bottom wells, < 4 µl for flat-bottom wells Level sensor buffer: Yes Level sensor waste container: Yes Wash programs: 1 to 9, depending on the assay Incubation time: 1 to 999 seconds, depending on the assay Pipette pressure: Adjustable for each assay individually Measurement: Vertical with photodiodes, Extinction or kinetic measurement Channels: 8 Operation: Single or double, with second measurement when the measuring range is exceeded Spectrum: 400 – 700 nm Filter: Up to 8 positions are available, of which 5 are already on board (405, 450, 492, 550, 620 nm) Measurement time: < 10 seconds Dynamic range: – 0.100 to 3,000 absorption units Linearity: 0 –2,000 absorption units ± 1.0% Precision: ± 0.005 absorption units or 2.5% Dimensions (WxDxH): 1130 x 760 x 1000 mm Weight: 130 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Sorvall SLA-3000 Super-Lite Centrifuge Fixed Angle Rotor 6 x 500ml 1200rpm + Lid was removed fr (more)om a university lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used. Compatible with Thermo Scientific Sorval Evolution RC Series and RC-6 Series centrifuges including RC-5, RC-5B, RC-5B Plus, RC-5C Plus, and RC-26.

This Evoqua Ultra Clear UV UF Water Purification System was removed from a university lab where it w (more)as surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in reasonably good cosmetic condition with minor marks from use. Operation hours since last service - 703UV Lamp hours - 703

The TRobot PCR Thermal Cycler from Biometra is an automated PCR machine specifically designed for in (more)tegration in robotic environments. This robotic PCR machine uses a small amount of bench space and consists of two separate parts; the block module which can be placed in the robotic enclosure, and the controller which can be located outside of the PCR workstation for easy access. The block module features a motorized heated lid and a uniquely designed motorized plate lifter to elevate plates from the block for easy removal. In addition, the TRobot Manager Software can be directly linked to any origin robot software, allowing for quick, easy access to all thermocycler functions. Overall, the TRobot is an efficient PCR machine that delivers high sample throughput making it the perfect solution for integration in robotic systems. Block Capacity: 96 x .2ml tubes; 96 well microplates; strips of 8 tubes Block Material: Silver block with gold coating (96 well) Temperature Range: -3 to 99ºC Temperature Gradient: No Max. Heating Rate: 3.5ºC/sec Max. Cooling Rate: 2.5ºC/sec Temperature Uniformity: +/- 0.5ºC Control Accuracy: +/- 0.1ºC Lid Temperature Range: 30ºC to 99ºC Temperature Uniformity of Air Cushion: Highest homogeneity Lid Height Adjustment: Motorized lid and motorized plate lifter Program Memory: 250 average programs; unlimited on PC Auto restart after power failure: Yes Noise Emission: Very low Dimension (W x H x D): 17 x 23 x 20 cm (thermocycler) 19 x 44 x 125 cm (controller) Weight: 5.9 kg (thermocycler) 7.0 kg (controller)

F1 Mass Standard - knob weights, service case. Nominal value - 100 kg.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315&rsquo;s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Speed: 600-3200 rpm Dimensions (HxWxD): 165 x 122 x 165 mm Weight: 4 kg