Radwag PT0454 Cable

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unrivalled functionality in a line of high-performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. Applications Weighing, Parts Counting, Percent Weighing, Checkweighing, Animal/Dynamic Weighing, Filling, Totalization/Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC Display 5.7" (145 mm) Full-color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232/Ethernet (accessories sold separately) . GLP/GMP data output with real-time clock. Construction Metal base, ABS top housing, stainless steel pan, glass draftshield with top mounted side doors & flip/sliding top door, illuminated up-front level indicator, weigh below hook, security bracket, calibration lock, 4 touchless sensors, in-use cover Design Features Selectable environmental filters, auto tare, user selectable span calibration points, software lockout and reset menu, user selectable communication settings and data print options, user definable project and user IDs, auto standby, up to 14 operating languages Technical features: Internal Calibration: AutoCal™ - Automatic Screen: Included Lid in use: Included Linearity: ±0.0002g Minimum weight according to (USP, 0.1% typical): 0.16g Repeatability (typical): 0.0001 g Stabilization time: 2 s Tare range: to flow by subtraction

Waters Source Ion Guide A Part Number 700004952 This was removed from a university lab where it was  (more)surplus to requirements. The unit is boxed but not sealed. We are unsure if it has been used. It comes boxed with a Certificate of Conformity

RS 232 cable: scale (15-pin connector) – computer (9-pin connector). Cable length: 2 m. Custom (more)ized cable length (extra charge): 5 m, 10 m.

Character communication protocol is designed for communication between RADWAG balance and external d (more)evice via RS232, Ethernet or Wi-Fi* interfaces. The protocol consists of commands sent from the external device to the balance and responses sent from the balance to the device. Responses are sent from the balance each time a command is received as a response to the command. The commands that make up the communication protocol allow you to obtain information about the status of the balance and ways to influence its operation, for example, they allow you to receive weighing results from the balance, control the display, etc.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Fully Antistatic Weighing Chamber Do you have an electrostatic sample that cannot be weighed? The ionizer will neutralize its electrostatic charge. How will you get an even more accurate weighing result? This will be ensured by a special antistatic glass coating that compensates for electrostatic charges on the sample and laboratory accessories. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Radwag laboratory holders have been designed to facilitate faster and more convenient weighing. They (more) ensure perfect and safe fixing of small vessels of typical and non-standard shapes. Features: Maximum weighing ergonomics Direct dosing of a sample into a vessel High efficiency, lower costs (minimized potential loss of samples during transfer) Direct dosing of samples into various vessels (test tubes, round flasks, flat flasks, plastic test-tubes, titration vessels) Laboratory holders are compatible with all Radwag analytical balances. Intended use: glass and plastic tubes - ø8, ø10 and ø12 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Beckman Coulter Z2 Coulter Particle Count & Size Analyzer was removed from a university lab (more) where it was surplus to requirements. We were assured the unit was in good working order when last used. The unit powers on but was not tested further. It comes with; 1 x Keyboard2 x 800L Waste Bottles200 x Accuvette 35ml Vials - Box has been opened but the vials are sealed. The system is in good cosmetic condition but has some marks from use.

Memmert IF450 Forced Circulation Incubator 449L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 449 L (15.9 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 449 L (15.9 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF450 Forced Circulation Incubator 449L, 115V offers precise temperature control with a setting range from +20°C to +80°C and a working range starting at Min. 10°C above ambient. Its large 449 L (15.9 cu.ft.) stainless steel interior, reinforced with deep drawn ribbing, ensures durability and easy cleaning, making it ideal for large-scale applications. The advanced ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display allows users to adjust various parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time, providing optimal control over the incubation process. This incubator features quiet forced air circulation with a turbine, adjustable in 10% increments, ensuring even temperature distribution and pre-heated fresh air admixture. Safety is ensured through an adjustable overtemperature monitor and mechanical temperature limiter TB, meeting DIN 12880 standards. Additional features include AtmoCONTROL software for advanced programming and data management, with support for up to 8 shelves and a maximum chamber load of 661 lbs. The IF450 combines high capacity, safety, and precision, making it suitable for demanding laboratory environments. INCLUDED: The Memmert IF450 Forced Circulation Incubator 449L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Are you overwhelmed by the number of production processes? What about having them all under control? (more) To be able to analyse and correct them in real time? After all, it is the key to increasing the efficiency of the production line! Our clients, the factory owners, were the ones who told us about their problems and needs. Our answer is simple: the E2R System. This software is designed to make your work easier. The E2R System consists of six independent modules: 1. E2R Weighing, 2. E2R Weighing Records, 3. E2R Formulations, 4. E2R PGC, 5. E2R Checkweigher, 6. E2R Moisture Analyzer. Choose the best module for your company. Need more information? With the E2R Weighing Records module, you can: record measurements at your weighing workstations in a safe and continuous manner; buffer the weighings on the scales and transmit them to the computer; work with external software for stockpiling, billing, accounting, and ERP systems; work with RADWAG weighing systems; automatically synchronize the time of weighing workstations; transfer databases from the computer to the scales; monitor the current status of the scales in the system; select products for production lines; archive weighings and functions for deleting archived weighings; exchange data with external systems; use friendly and flexible reporting mechanisms, such as: - generating data from a set period of time, - data browsing using the filtering option, - reporting individual weighings, - determining the name and image of report headers, - creating reports on production process statistics, - generating detailed and summary reports with selected information; create weighing graphs for products, scale, platform, operator, customer, batch and lot; export weighings to files: PDF, HTML, MHT, RTF, XLS, XLSX, CSV, TXT and more; customize the permission levels for different users of the system; customize the graphical interface, reports and graphs; select the language of each of the system components; work over Ethernet and Wi-Fi.