Facilities & equipment

The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetti (more)ng system, and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin-column kits.  The QIAcube is preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids, and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded free of charge. In addition, customized protocols tailored to meet your specific application demands can also be requested.  The QIAcube is highly suitable for academic research laboratories as well as pharmaceutical, biotechnology, and biomedical research laboratories performing applications, such as: Sequencing/sequencing analysis Gene expression analysis Genotyping Proteomics Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Humidity: Relative humidity of 10-75% (noncondensing) Instrument dimensions: 650 x 620 x 570 mm Operating temperature: 18 – 28°C Pipetting system: Syringe size 1 ml, pipetting range 5-900 µl Samples per run: 1–12 samples per run Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range of room temperature to 70°C, ramp-up time of <5 min from room temperature to 55°C (± 3°C) Software: QIAGEN protocols are preinstalled on the QIAcube or can be downloaded at www.qiagen.com/MyQIAcube Weight: 70.5 kg

The Model 400 Hybridization oven is a high precision rotating convection oven for Northern blot and  (more)Southern blot hybridizations and other applications.

19′ inch

The G1-LN-800 is a gas generator intended for the continuous production of nitrogen with over 99.999 (more)% purity, that is often required in a variety of life science applications. This model offers a very quiet and user friendly (plug and play) operation and comes equipped with a built-in compressor unit that is completely oil-free. It is also highly economical as it offers very high production up times without the need for any additional supply options and is available with the extensive aftermarket support. This unit is capable of accommodating flows of up to 800 ml/min and can safely operate at temperatures from 5 to 45 °C. Dimensions (h x w x d): 560mm x 400mm x 700mm 230V / 50-60Hz

Pipette tips 100 μL with filter GILSON DF100ST Diamond, sterile, rack of 96 pieces. You can also eas (more)ily order PIPETTES and/or PIPE HOLDERS  . Volume: 10 – 100 µL Rack of 96 pieces Color code: Yellow Length: 51 mm High quality PP Sterile With filter

Temperature range: -16°C/-18°C/-20°C/-22°C/-26°C Dimensions (WxDxH): 59 x 58 x 1850 mm

Pharmatest PTWS310 dissolutietester

The epMotion 5075 is supplied with 3 dispensing tools which are inserted automatically. These dispen (more)sing tools and their appropriate pipette tips can be used to dispense quantities of liquid in the volume range from 1 µL to 1000 µL. The liquid is samples from the source tube in pipette tips, transported and deposited in the destination tube. On request, an optical sensor automatically checks the correct selection and positionning of tubes, available supplies and the position of pipette tips in the rack, as well as liquid level in some tubes. With the aid of predifined commands, you can create and edit simple or complex dispensing operations yourself and combine these into methods. In the process, you specify in the software, among other things, the source location and destination location as well as the desired dispensing or transport parttern. Equipped with following dispensing tools: TS 50 – volume range 1µL to 50 µL TS 300 – volume range 20 µL to 300 µl TS 1000 – volume range 40 µL to 1000 µL Including PC with software

Interscience GC 8000 TOP

Scope: Flexibility: Efficiency

This CellASIC System delivers breakthrough control for live cell analysis experiments by combining t (more)he highest precision controls, maximum functionality, and simplified user operation. What you’ve always imagined can now be reality, using the CellASIC ONIX System to design dynamic cell biology experiments. The applications listed below are just a few of the exciting experiments you can perform with unprecedented precision: Cell response over time Interrogating 3D cell culture Chemotaxis/migration Drug dose/response Neural stem cell analysis Host-Pathogen interactions Hypoxic conditions to mimic tumor environments Bacteria single cell analysis Yeast single cell analysis This platform consists of: EV262 CellASIC ONIX Microfluidic System MIC230 CellASIC ONIX Microincubator Controller GM230 CellASIC ONIX Tri-Gas Mixer F84-HE3 CellASIC ONIX Manifolds

Heating Block 100–300ml Suitable for flasks with a point. New, never used. From surplus stock. Wa (more)rranty: 1 month

Hotplate made of ceramic glass which offers excellent chemical resistance. Heating temperature range (more): 50 – 500°C Heat control: Turning knob Set temperature resolution: ±10 K Volume max.: 5 l Heating rate heating plate: 2.5 K/min Set-up plate material: ceramic Set-up plate dimensions: 100 x 100 mm Dimensions (WxHxD): 150 x 105 x 260 mm Weight: 2.44 kg

2 aluminum heating blocks (20 places with a diameter of 15 mm)

Pipette tips 1000 μL GILSON D1000ST Diamond, sterile, rack of 96 pieces. You can also  easily order  (more)PIPETTES and/or PIPE HOLDERS . Volume: 100 – 1000 µL Rack of 96 pieces Color code: Blue Length: 66 mm High quality PP Sterile

Filter Pipette tips 30 L GILSON DF30ST Diamond Tipack, sterile, rack of 96 pieces. You can also easi (more)ly order PIPETTES and/or PIPE HOLDERS  . Volume: 2 – 30 µL Rack of 96 pieces Color code: Yellow Length: 51 mm High quality PP Sterile With filter

Pipette tips 5 mL GILSON D5000 Diamond Tips TIPACK, rack of 50 pieces. You can also easily order PIP (more)ETTES and/or PIPE HOLDERS  . Volume: 500 – 5000 µL Rack of 50 pieces Color code: Purple Length: 104 mm High quality PP Non-Sterile

12-channel pipette 10-100 µL eppendorf Research plus, variable volume. You can also easily order the (more) corresponding PIPE POINTS . Volume: 10 – 100 µL Adjustable volume Color code: Yellow

Temperature range: Ambient + 5°C to 70°C Temperature accuracy: 0.1°C Capacity: 108 L Dimensions (WxH (more)xD): 710 x 760 x 550 mm Internal dimensions (WxHxD): 560 x 480 x 400 mm Weight: 50 kg

The ASP2000 is a precision micro-stepping, high torque drive “workhorse” liquid handler Autosampler  (more)that delivers robust performance for fast and accurate sample preparation and direct injection into UV and HPLC systems. The ASP2000 is suitable for a wide variety of applications with the ability to pierce multiple septa with very high accuracy and repeatability. It also has the ability to inject into tiny injection ports. This unique, near-perfect design of hardware and software performs sample processing tasks effortlessly with seamless integration with the IDIS data management system configurations. Including a Icalis DXi-50 pump and a Icalis RS8 remote serial controller.

230V, 50 Hz, 0.5A