Process controls

Twinbird Corporation SC-UE15R FPSC Module UE15 with Heat Absorption Ring This item was removed from  (more)a university lab where it was surplus to requirements. It is in good cosmetic condition but has not been powered on, as it requires wiring into a power supply. Specifications:- Model: SC-UE15R - Serial No.: 3 5Z16

Eurotherm Process Automation System with TCS Tactician T1000 & Components This was removed from (more) a university lab where it was surplus to requirements. The unit is in reasonable cosmetic condition though the access panel of the switchboard has snapped all its hinges. These will need replacing to secure the unit. We were unable to power the unit or the TCS Tactician T1000 Controller It was not tested further. The cabinet is filled with electrical components.

B.O.B Stevenson Type 7736 MN 40500 Centrifugal Fume Extraction Fan This item was removed from a univ (more)ersity where it was surplus to requirement. It is in good cosmetic condition, we are unable to test it further at our facility.

This Thermometric 2277 Thermal Activity Monitor (TAM) System was removed from a university lab where (more) it was surplus to requirements. The unit powers up but it was not tested further. There is a light flashing "pump failure". We are unsure if this is a fault, or if it is due to the parameters in which it was tested. It is in reasonably good cosmetic condition with some marks from use. It comes with two covers for the control panel.

WEG CFW -11 Venture Inverter Control Box Lab This item was removed from a university where it was su (more)rplus to requirement. It is in good cosmetic condition, we are unable to power it on or test it further at our facility. The key is not included but can be opened with a standard control cabinet key. Includes manual. The unit has no cable so is sold for spares/repairs

Panlab Harvard Apparatus Load Cell Coupler LE 111 & Shocker LE 100-26 These units were removed  (more)from a university lab where they were surplus to requirements. Both units power up but have not been tested further. They are in good cosmetic condition with minor marks.   Included are; Panlab Harvard Apparatus Load Cell Coupler LE 111Model: Load Cell Coupler LE 111Serial#: 775509 Panlab Harvard Apparatus Shocker LE 100-26Model: Shocker LE 100-26Serial#: 775609

PendoTECH PressureMAT PMAT3 Lab This item was removed from a university where it was surplus to requ (more)irement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

ITEM-35764

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LCNP15Serial No. 01162Manufactured 30.05.14Output 1303Kw/hr With Autoflame Combustion Management SystemPart Nos. 2 x MM10005, Serial Nos. 12272, 12302 Siemens Ignition Transformer Type ZE 23/8.5 Dungs LGW 50 A4 pressure switch WEG W22 7.5hp 415 volt fan motor 2.0" gas inlet pipe

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LCNP15Serial No. 01160Manufactured 30.05.14Output 1303Kw/hr With Autoflame Combustion Management SystemPart Nos. 2 x MM10005, Serial Nos. 12294, 12331 Siemens Ignition Transformer Type ZE 23/8.5 Dungs LGW 50 A4 pressure switch WEG W22 7.5hp 415 volt fan motor Caldaia A Condensazione high limit cut-off control 2.0" gas inlet pipe

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LCNP15Serial No. 01159Manufactured 30.05.14Output 1303Kw/hr With Autoflame Combustion Management SystemPart Nos. 2 x MM10005, Serial Nos. 12303, 12290 Siemens Ignition Transformer Type ZE 23/8.5 Dungs LGW 50 A4 pressure switch WEG W22 7.5hp 415 volt fan motor Caldaia A Condensazione high limit cut-off control 2.0" gas inlet pipe No testing carried out.

Micromeritics Gemini w/ Flow Prep 60 These items were removed from a university lab where they were  (more)surplus to requirements. Both power up but have not been tested further. They are both in good cosmetic condition, with minor marks from use. All items included; 1x Micromeritics Flow Prep 60:Model FlowPrep 060 LB 1x Micromeritics Gemini:ModelGemini 1x Micromeritics Gemini Remote:Model 2360 1x Micromeritics Memory CardModel Gemini 2360

Armfield PCT Process Control Teaching System Lab This system was removed from a university where it  (more)was surplus to requirement. All units are in good cosmetic condition and power on independently, it has not been tested as a full system. The lab confirmed it was in full working order prior to removal. Included are; -Armfield PCT-9 Process System (Powers on)Fair cosmetic condition -Armfield Pressure Control AccessoryFair cosmetic condition -Armfield PCT 13 Temperature control module (not powering on)Poor cosmetic condition -Armfield Process Controller (Powers on)Fair cosmetic condition

This listing is for 1 of 2 BugLab BE2100 Biomass Sensor.The unit is in full working condition and is (more) ready for immediate release.The BugLab BE2100 Biomass Sensor is an advanced, non-invasive sensor designed for real-time, in-situ monitoring of biomass concentration in bioreactors and fermenters. It is widely used in biopharmaceutical, biotechnology, and industrial fermentation applications to track microbial growth, providing valuable data for optimizing production processes.Key Features:Non-invasive: The BE2100 is designed to be used externally, which allows for real-time monitoring without the need to extract samples or disrupt the process.Real-time Biomass Monitoring: Provides continuous data on biomass concentration, enabling users to make on-the-fly adjustments to optimize growth conditions.Compatible with Bioreactors and Fermenters: Can be easily integrated into most existing fermentation systems, making it a versatile tool for various bioprocesses.Optical Density Measurement: Measures the optical density of the culture, correlating the light scattering properties of cells in the growth medium with biomass concentration.User-Friendly Interface: The sensor provides instant feedback on the biomass concentration, helping operators monitor growth phases more accurately.Advantages:Sterility Maintained: Non-invasive design ensures that the process remains sterile, as there is no need to open or sample the bioreactor or fermenter.Accurate & Reliable: High precision measurements offer real-time insights into the biomass concentration, improving process efficiency.Low Maintenance: The external, non-contact design requires minimal maintenance, reducing operational downtime.Cost-effective: By providing real-time monitoring, the sensor can help avoid unnecessary batch failures, improving overall productivity and reducing costs.

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

Dansensor Ametek Check Point 3 O2 Mocon Dansensor Portable gas analyzer for quality control of your  (more)packaging under protective atmosphere (MAP) With needle Brand AMETEK MOCON Model: CheckPoint 3 O2 Year of manufacture: 2017 With accessories Sampling volume: 5ml Sampling time: 7s

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

LABORATORY INCUBATORS ILW SMART POL-EKO ILW - POWERFUL, FOR MICROBIOLOGICAL TESTS ILW incubators are (more) perfect for the stable and safe incubation of samples, in any working environment. They maintain a constant temperature from 0°C to 70°C (It's necessary to purchase automatic defrosting function, ILW PLUS, for all units operating at set point <=5°C to prevent icing). The version capable of reaching -10 °C is available as an option, while with the SMART PRO version you can expand the heating range up to +100 °C. More! Large touch display, alarms, lock, easy to clean stainless steel interiors will make the use of these incubators a breeze. Thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Available in the special models FOT (SMART version) and FIT (SMART PRO version) FOCUS: Photoperiodic (FOT) and phytotron (FIT) systems allow day/night simulation. While the FOT option allows you to turn the light on and off from the display thanks to a program, with the FIT option you can also control the intensity of the light. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. ILW SMART SERIES POL-EKO offers 5 models of refrigerated incubators with capacities from 56 to 749 litres. The ILW series are only available in the forced air version. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Internal glass door 4 - Shelf 5 - Condenser housing 6 - Solid external door 7 - Temperature sensor 8 - Ventilation 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 12 - Handle with lock 1 - Main switch 2 - Adjustable feet 3 - LAN port 4 - Fuse 5 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the FIT system (phytotron) for the ILW SMART PRO models. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - Automatic defrost function - Version up to -10°C - Reinforced version - Interior light - Photoperiodic system - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door