Wave Biotech Bioreactor System SPS Rack 400.010 20SPS 50SPS

Dansensor Ametek Check Point 3 O2 Mocon Dansensor Portable gas analyzer for quality control of your  (more)packaging under protective atmosphere (MAP) With needle Brand AMETEK MOCON Model: CheckPoint 3 O2 Year of manufacture: 2017 With accessories Sampling volume: 5ml Sampling time: 7s

Safety and resistance for your laboratory OHS advance is designed to guarantee the highest safety st (more)andards. - The durable watertight housing and IP 54 protection rating ensure durability even in the most aggressive environments. - Built-in safety alarms for overload, over temperature and over current will maintain performance over time by stopping agitation - The safe operation of the start and stop knob and the lock key prevent unintentional starts and changes in working conditions. - The built-in vibration sensor with different sensitivity levels will stop the operation and inform you to make sure your OHS is stable and properly fixed. Continuous operation guaranteed and supported by a 3 year extended warranty. First-class performance OHS 200 Advance is the ideal solution for demanding applications operating with viscosities up to 100,000 mPa. The electronically controlled brushless motor of the OHS 200 Advance agitates up to 100 l (H2O) with a maximum torque of 200 Ncm and guarantees maximum durability. SpeedServoTM torque compensation technology maintains constant speed by automatically adapting to changes in viscosity. Set the OHS 100 Advance electronic speed control from 30 to 1300 rpm. Constant Torque at Any Speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional rod stirrer and VELP OHS Series rod stirrers. The torque remains constant at any speed, even at maximum. Having a constant torque is a very important parameter for the reproducibility of the analyzes. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod fall into the liquid? SmartChuck ™ technology makes this activity quick and easy with the use of one hand and without special accessories. Two simple movements allow you to unlock the protection ring and remove or replace the stirring rod. In the event that the protection ring is opened during the analysis, the instrument stops shaking, showing a safety message on the display. Intuitive and precise control panel The intuitive 3.5” OHS Advance TFT display will guide you to precisely set your working conditions and achieve reproducible results. Show key information at a glance. Real-time information on viscosity variation with a resolution of 1 Ncm. Interact with OHS Advance from the real-time graph showing speed, torque and temperature of your test. The OHS Advance works without surveillance thanks to the timer that can be set from 1min to 99.59h. Ideal operating methods can be defined and programmed for demanding tasks where ramps and interval operations are required. Temperature under control OHS Advance is supplied with a Pt100 temperature probe included in the package. Constantly monitor the temperature of your reaction and set the meter to slow down or stop activity if the temperature reaches a defined value. This is important when you want to prevent exothermic reactions from interfering with your analysis! THE BENEFITS OF OHS ADVANCE CONNECTIVITY The OHS Advance is the only rod stirrer to offer the ability to control and monitor processes via Wi-Fi connection to VELP Ermes and via USB. The VELP Ermes cloud platform allows you to control the OHS Advance from PC, smartphone and tablet through a simple and intuitive web interface. With this platform designed by VELP it is possible to activate the shaking, set a timer, set a method (among those saved on the device), download and share reports with a click. For applications in the pharmaceutical, biotechnology and life science sectors, VELP Ermes can manage OHS Advance localized in clean rooms or other controlled environments, without the need for lengthy safety procedures. With the OHS / CotrollerSoftTM software, VELP offers the possibility to all laboratories that cannot benefit from cloud services, a valid alternative with USB connectivity. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS ADVANCE MODELS A - LCD display B - Display keys C - Stirring speed kond D - Lock key E - Main switch F - Smart Chuck

Labotect C200 CO2 incubator for in vitro fertilisation (IVF). Capacity 200 litres. Temperature range (more). 27ºC - 47ºC. Stability / uniformity ±0.1 °C /  0.3 °C. Door camera and heated. Range CO2 0 - 10%. Sensor CO2 inflarrojo double beam. Minimal contamination. Active sterile humidity. Glass door, internal subdivided in 6 sections. Shelves adjustable. Over-temperature alarm 32-47 °C. Includes outer container to supply humidity, sterile. Manual. Specifications 230V , 50/60 Hz Device with medical acceptance Interior made of polished stainless steel Intelligent system of temperature control for the inner drying of the chamber. CO2 Sensor -Sensor inflarrojo dual beam -Accurate measurement -Recovery time very short -Long-term stability Direct heating. -Distribution of the homogeneous temperature in the interior -Recovery time very short Diagnostic system -Acoustic alarm and optical -Monitoring of the door -Remote alarm

Are you overwhelmed by the number of production processes? What about having them all under control? (more) To be able to analyse and correct them in real time? After all, it is the key to increasing the efficiency of the production line! Our clients, the factory owners, were the ones who told us about their problems and needs. Our answer is simple: the E2R System. This software is designed to make your work easier. The E2R System consists of six independent modules: 1. E2R Weighing, 2. E2R Weighing Records, 3. E2R Formulations, 4. E2R PGC, 5. E2R Checkweigher, 6. E2R Moisture Analyzer. Choose the best module for your company. Need more information? With the E2R PGC module, you can: safely and continuously record measurements and controls at the weighing workstations; buffer the weighings and controls on the scales and transmit them to the computer; carry out product controls in grams and millilitres; carry out destructive and non-destructive controls; automate the control process; control operator errors; support dual-platform scales; carry out two controls at one weighing workstation; synchronise time of the weighing workstations; transfer the “Products”, “Operators” and “Schedules” databases from the computer to the scales; schedule a cyclic product control on the selected scales; set a reminder to take a measurement in an ongoing control with the possibility of using a signalling option; check correctness and determine tare thanks to the average tare module; determine the average tare before each control or at the set interval; record weighings and controls taken from the scales into the computer; monitor the status of scales and controls in the system; disable the measurement recording for tare outside the tolerance range; disable the recording of the net mass measurement outside the tolerance range; exchange data with external systems; use friendly and flexible reporting mechanisms, such as: - generating information on measurements and archived controls from a particular time interval, - data browsing using filtering option, - a summary of selected weighing-related information, - reporting of individual weighings, - determining headers of individual weighing reports, - generating weighing statistics reports, - changing the batch quantity in the control to meet the statutory ranges criteria, - changing the batch number in the control, - adding individual comments to the control report. - export control and weighing reports to files: PDF, HTML, MHT, RTF, XLS, XLSX, CSV, TXT and more; customize the permission levels for different users of the system; customize the graphical interface, reports and graphs; work with external software for stockpiling, billing, accounting, and ERP systems; work with RADWAG weighing systems; select the language of each of the system components; work almost anywhere over Ethernet and Wi-Fi.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The professional weighing workstation is intended for microbalances and analytical balances. It is e (more)quipped with two lockers for a computer and an emergency UPS power supply or a power strip. The workstation also has a sliding shelf for a keyboard and a mouse. It additionally features ventilation openings and a base for a monitor. The separated anti-vibration part provides protection against vibration, and the feet feature rubber tips to facilitate table levelling on uneven floors. The structure of the workstation is made of steel, the top of stone, and the working part of MDF.

Tuttnauer 2340M AutoclaveFeatures - Automatic shut off at the end of both the sterilization and dry (more) cycles. - A long life electro polished Stainless Steel chamber and door. - Double safety locking device prevents door from opening while chamber is pressurized. - Drain valve is located on the front, allowing for quick and easy draining of water reservoir. - Dual safety thermostat to protect against overheating. - International certifications. - 1 year parts and labor warranty. 10 year chamber warranty With the operator in mind, the colorful control panel is both intuitive and easy to use. Control panel includes a pressure gauge, timer, thermostat, and function selector. Tuttnauer manual autoclaves will compliment any healthcare facility and satisfy all of your sterilization needs. With a small foot print of only 545 x 510 x 365mm this autoclave is both efficient and compact. The internal chamber has a volume of 5 gallons (19 liters) and can fit three stainless steel trays. The long-life elecro polished chamber and door are made to last. The Tuttnauer 2340M Autoclave is designed to compliment any healthcare facility. The bright new easy-to-use panel was designed with the operator in mind. The 2340M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. Standard unwrapped cycle Hot start: 13 min., Cold Start 27 min. Cycle times are approximate and may vary depending on instrument loads. INCLUDED: The Tuttnauer 2340M Autoclave includes: - 3 Stainless Steel Trays - Tray Holder - Base Plate - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty

Julabo DYNEO DD-310F Refrigerated Circulator with Analog Output and Natural Refrigerant (R290), 115V (more)/60Hz Refrigerant R290 Working Temperature Range -30°C - 200°C Cooling Capacity 300W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - Class III (FL) according to DIN 12876-1 DYNEO™ DD-310F refrigerated/heating circulator with an operating range of -30…+200 °C and ±0.01 °C stability. Suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB-B connection for external PC control and USB-A for data-logging. Additional communication options include an RS232 port or an analog module interface, for voltage or current control. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tank (3-4L) with integrated drain port. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 0.3kW cooling power at 20 °C with 20W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-310F Refrigerated Circulator with Analog Output and Natural Refrigerant (R290), 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA R 1345 Propeller 4 - Bladed Stirrer Standard stirring element. For drawing the material to be m (more)ixed from the bottom to the top. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds.Stirrer Ø: 100 mmShaft Ø: 8 mmShaft length: 540 mm INCLUDED: The IKA R 1345 Propeller 4 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

Eppendorf 15 x 7ml Adapters, Cat. # 022638246 New in box Eppendorf 15 x 4-7ml adapters (Cat. # 02263 (more)8246) for rectangular 250ml buckets for the Eppendorf 5810 and 5810R centrifuges. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 15 x 7ml Adapters, Cat. # 022638246 includes: - Full 6 Month Parts and Labor Warranty