Sterilizer 75

Tuttnauer vertical laboratory autoclaves are top loading autoclaves. ELV models have an advanced mic (more)roprocessor control panel and chamber made of 316L stainless steel. Tuttnauer laboratory autoclaves have been designed to provide high quality repeatable performance and accountability for a wide range of applications used in modern laboratories. Vertical lab autoclaves are designed for your convenience and ease of use when vertically loading the autoclave. Chamber Dimensions (ØxD): 280 x 460 mm Chamber Volume: 31 L External Dimensions (WxHxD): 540 x 980 x 440 mm For programs see images

This Small-Steam-Sterilizer provides sterilization of wrapped or unwrapped surgical and dental instr (more)uments at 134°C as well as sterilization of thermolabile sensitive to heat materials at 121°C. It is designed for use at on-site locations. Permissible operation overpressure: 3 bar Working Pressure: 1,1/2,2 bar Permissible operating temperature: 138°C Working Temperature: 121/134°C Capacity of sterilization chamber: 19,5 L Acoustic power level: <85 dB(A) Dimensions (HxWxD): 440 x 500 x 700 mm Chamber dimensions (⌀xD): 250 x 380 mm Weight: 45 kg

Electro-mechanical lid lock system Dual interlock mechanism Air removal time setting Effective capac (more)ity: 50 L Chamber size (Ø x H): 300 x 710 mm Operation mode: 4 modes (LIQUID with warming, LIQUID without warming, SOLID, DISSOLUTION), one memory for each mode Temperature setting range sterilization: 105°C – 126°C (Variable) Temperature setting range dissolution: 60°C – 100°C (Variable) Temperature setting range warming: 45°C – 60°C (Variable) Time setting range sterilization: 1 min – 250 min, Remaining time is displayed Time setting range dissolution: 1 min – 60 min, Remaining time is displayed Time setting range warming: 20 h (fixed) Time setting range auto-start timer: Program autoclave to start 1 min to 1 week later Exhaust setting: 4 levels from 0 to 3 (Variable), In SOLID mode, it is fixed to level 3 (forced cooling) Exhaust setting: 0% – 100%, Valve opening degree setting for LIQUID mode Maximum working pressure: 0.26 MPa Thermometer: 5°C – 137°C Pressure gauge: 0 MPa – 0.4 MPa Alarms, error display: Low water heating, Temperature sensor wire disconnection, Over-temperature, Over-cool, Over-pressure, Abnormality in lid opening / closing lever lock Dimensions (WxDxH): 547 x 532 x 1045 mm Weight: 57 kg

The autoclave of the brand PBI type Stematic III is designed for the sterilization of materials resi (more)stant to high temperatures and high pressure steam, such as instruments made of glass, ceramic, metal or rubber. Furthermore, this autoclave is ideal for the sterilization of various media and reagents. Working pressure up to 134°C (max. working pressure 2.1 bar) Content: 21 L External dimensions (DxHxW): 455 x 885 x 460 cm Inner dimensions (øxH): 250 x 430 mm Timer defective, this has no further influence on the operation of the autoclave. Programs do not stop after a set time, but can be stopped manually.

With extra fast and efficient drying cycles, the EA autoclaves significantly increase your productiv (more)ity. This model has the added benefit of a high efficiency air pump which allows closed door active drying. The EA is built for improved sterilization with the ability to dry packs and pouches. Chamber volume: 23 L Tray dimensions (WxHxD): 168 x 20 x 414 mm Dimensions (WxHxD): 508 x 362 x 550 mm Weight: 36 kg

PRECISION REFRIGERATOR FOR PHARMACIES manufactured by B Medical System SECURITY AND PEACE OF MIND -  (more)Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in accordance with FDA 21 CFR Part 11) and long-term archiving in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene structure injected with polyurethane foam that provides strong thermal insulation - 4-layer PMMA organic glass door offering maximum insulation, combined with weight reduction to reduce door closing efforts - Automatic internal LED lighting for lower energy consumption - Monobloc structure made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Easy access to parameters on a 7' touchscreen with temperature display - NFC card/password protected door lock mechanism - USB port and SD card slot for easy data export - Antibacterial coating for easy hygiene control - Silent - Low heat emission - Modular internal equipment - Easy access to lower drawers - Stainless steel and other high quality materials for durability PREMIUM Technology: New B Medical Systems 7" touchscreen display integrated into the door handle with pre-installed connection enabling unique monitoring capabilities; simplified door lock mechanism, with a large, heavy-duty handle; access/lock the opening using an NFC card; USB port and SD card slot. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

Gilson MiniPuls 3 peristaltic pump Technical characteristics Voltage: 220-240V, 50/60Hz Power: 45VA  (more)Speed: 0-48 revolutions 8 channels Standard flow rate: 0.3 µL/min – 30 mL/min at maximum pressure 0.5 MPa Pump head speed: adjustable 0 to 48 rpm with increments 0.01 rpm to 9.99 rpm and increments 0.1 rpm to 10 rpm Standard model pipe diameter: 0.25–4 mm (ID) External dimensions (L) x (D) x (H): 15 x 17.5 x 29.5 cm