Bioit eLine Picus Charging Stand Ladeständer Karussell 4 Pipettes Pipetten

Print resolution: 203 dots/inch, 8 dots/mm or 300 dots/inch, 12 dots/mm Dot size (WxL): 203 dpi – 0. (more)125 x 0.125 mm, 300 dpi – 0.084 x 0.099 mm Maximum print width: 203 dpi – 104 mm, 300 dpi – 106 mm Bar code modulus: 203 dpi – 5 mil to 50 mil, 300 dpi – 3.3 mil to 33 mil Programmable constant print speeds: 51, 76, 102, 127 and 152 mm/s Media label length: Minimum (tear off) – 17.8 mm, Minimum (peel off) – 12.7 mm, Maximum – 991 mm Media label width: Minimum – 19 mm, Maximum – 114 mm Media total thickness (including liner, if any): Minimum – 0.076 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm, 25 mm core – 152 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 109 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m, 3:1 media to ribbon roll ratio – 450 m Ribbon core inside diameter: 25.4 mm Dimensions (HxWxD): 295 x 272 x 477 mm Weight: 12.4 kg

The HX7.4P C is a brand new design comprised of the advanced PUE HX7 indicator, made of stainless st (more)eel, and a powder coated 4-load-cell pallet construction. It is intended for weighing of Euro pallets as well as any transport pallets of 800 × 1200 mm dimensions. The scale enables loading the weighing pan using a forklift. The indicator thanks to its distinguishing features such as a colour 7” graphic display, and a diode bar graph which signals the current load mass referred to the scale range or the declared min and max thresholds, significantly simplifies the operation. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Scilogex D2012 Personal Mini-Centrifuge The D2012 Micro-Centrifuge is a compact and powerful high-sp (more)eed centrifuge used in physical and chemistry analysis, biochemistry, cellular and molecular biology, clinical Labs and blood donation centers, and is ideal for high-end research applications such as: sedimentation of cells and viruses, separation of sub-cellular organelles, and isolation of macromolecules such as DNA, RNA, proteins or lipids. Supplied with a 12 position 1.5/2.0ml micro-tube rotor. Click Here to View Product Video

KNF IP65 FEM 1.02 FT.18S Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit mo (more)st laboratory liquid metering and dosing needs. The FEM 1.02 ST.18S version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue.INCLUDED: The KNF IP65 FEM 1.02 FT.18S Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HG-80 Floor-Standing Autoclave with Automatic Lid, 85L, 208/220/240V Chamber Volume (more) 76L Sterilization Temperature Range 105ºC to 135ºC Chamber Dimensions 14.3 x 28.7 in(36.4 x 73.0 cm) Features - Automatic Lid Opening and Closing Button replaces a foot pedal. - Safety Interlock senses pressure and temperature and prevents lid from opening during a cycle, when the chamber is pressurized, and when the high temperature can cause boil over. - Programmable Auto-Start for running a cycle from 1 to 99 hours later and time for air removal before sterilization. - Large (15 liters) / Efficient Steam Condenser ensures no steam exhausts into the lab. The HG-113 and HG-133 incorporate a radiator for this. - Over-Flow Lamp indicates that the drain bottle is full and ready to be emptied. - Built-in Cooling Fan for faster post-sterilization cooling and shorter completion time. - Selectable Rate of steam venting after sterilization. - Twelve Programs Cycles can be stored. - Large Control and Display Panel improves functionality and shows the progress of the sterilization cycle. The Hirayama HICLAVE HG-80 is an advanced 85L floor-standing autoclave designed for efficient and safe sterilization. It features an automatic lid opening button to replace the conventional foot pedal and an automatic lid closing button for convenience. Its safety interlock prevents the lid from opening during cycles, ensuring safety when the chamber is pressurized or at high temperatures. The programmable auto-start can delay the start of a cycle by 1 to 99 hours. A large and efficient 15-liter steam condenser prevents steam from exhausting into the lab, complemented by a built-in cooling fan for rapid post-sterilization cooling. Users can select the rate of steam venting post-sterilization and program the air removal time before sterilization begins. Up to twelve program cycles can be stored for easy recall.The HG-80 boasts a large control and display panel, enhancing functionality and cycle progress visibility. Specifications include a chamber size of 76 liters (14.3" x 28.7"), a temperature range of 105°C to 135°C, a sterilization timer from 1 to 300 minutes, and an agar warming range maintainable from 45°C to 60°C for up to 24 hours to prevent coagulation. Additional features include a programmable air removal timer, selectable steam venting rates, and customizable temperature settings for lid interlock release for increased safety and flexibility. The unit is equipped with comprehensive safety features, including a circuit breaker with GFCI, low-water power cut-off, over-temp power cut-off, over-pressure power cut-off, safety valve, and a sensor for improper lid closing. The autoclave comes with a 15-liter water tank for the steam condenser and a 2-liter drain water bottle. It operates on 208/220/240V, 50/60 Hz, single-phase power, with a consumption of 3.8 kW, and ships at a weight of 255 lb (116 kg).INCLUDED: The Hirayama HICLAVE HG-80 Floor-Standing Autoclave with Automatic Lid, 85L, 208/220/240V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty