ELGA PURELAB Ultra ULXXXIOM2 MK2 Water Purifier Purification System Lab

HACH LANGE LT 200 DCO heating block Model: LTG082.01.23002 LT200 Temperature: 37 to 150°C per 1°C Ti (more)me: 0-480 mins Heating: from 20°C to 150°C in 10 minutes Stability: +/-1°C Dimensions HxWxD: 145x250x310 mm Power supply: 220 V - 50/60 Hz - 600 VA Safety: maximum insulation, transparent protective cover locks, audible signal at end of program For 30 Ø13mm tubes Equipment tested at 120°C

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Retsch Model: 25ml grinding bowl stainless steel P/N: 02.462.0119 Key features:  - Wit (more)h cover.  - The approximate composition is 84.5% Fe, 13% Cr.  - The approximate density is 7700 kg/m3.  - Can contain a sample volume of 4 to 10 ml  - The maximum particle size in the container is 6 mm  - The recommended ball charge for the container is one piece, 20 mm; or two pieces, 12 mm   Scope of delivery:   - Stainless steel grinding bowl 25ml - Stainless steel lid The grinding bowl is in very good condition and has been 100% function tested.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Thermo Scientific Matrix Hydra II Automated Liquid Handling System was removed from a universit (more)y lab where it was surplus to requirements. The system is in good cosmetic condition with marks from use. All modules power up. We had a service engineer inspect and test this system after setting up and connecting all the electronic connectors but not the pipes. The 1-channel nanofill mechanism was stuck so they took it apart and lubricated it. It's now working fine and can be controlled by the PC. The matrix stage is working fine and can be controlled by the PC but the dispenser is not working. The Hydra pump Module: They have changed the two fan guards with better ones and cleaned the fan. Now they are looking better. This module is working fine and communicates with the PC as normal. We can run test protocols but from time to time we got some error messages. I think that because the fact we have not used any liquid and the system sends feedback when the liquid passed through some parts. The system is made up of the following; 1 x Matrix Hydra IICat no. 109610 1 x Matrix 2 Position Stage 1 x Apogent Discoveries Matix Hydro Pump ModuleThe unit powers on with all 3 Fills working. 1 x Matrix P1 Control Box 1 x Innovadyne 1-Channel NanofillThe unit powers up. 1 x Grant Instruments Type MS1The unit powers up. Dell Laptop with Microsoft MouseModel - PP04XHydra II-Plus-One Control Software Version 3.1.3 InstalledThe unit powers up and the software runs. Software Discs:Matrix Hydra II-Plus-One Control Software Version 3.1.3Matrix Hydra II-Plus-One Control Software Version 3.1.2SuperLogics LE Software Suite Rev 2.92 x Socket Installation discs Various tubing and accessoriesOperating instructions

Thermo Fisher Model Safe 2020 1.5 Class 2 Biological Safety Cabinet Lab This item was removed from a (more) university lab where it was surplus to requirements. The unit powers on and the fan, airflow, UV, white light, and window up/down function properly. It is in good cosmetic condition with some minor marks from use. Safe Working area 78 x 150cm Includes:-Manual-Stand for unit

A&D Weighing Galaxy HR-100AZ Analytical Balance, 102 g, 0.1 mg Capacity 102 g Readability 0.1 m (more)g Repeatability 0.1 mg Features - Compact Super Hybrid Sensor (C-SHS) enables space saving with fast 2 sec stabilization - One-touch Cal allows any user to perform internal calibration in seconds - HR-AZ Series products come equipped with internal calibration, ensuring precision and ease of use to meet diverse application and budgetary needs. - Rugged, shatterproof breeze break with anti-static plastic provide safety for challenging applications where product & user safety is a concern - Rotary-Radius doors take up no extra room in fume hoods/glove box and increase safety by avoiding operation mishaps - The breeze break detaches in an instant, even with heavy gloves, making it easy to clean and safe to top-load - Simple user navigation makes this ideal entry level balance from lab to industrial weighing environments - Front mounted illuminated spirit bubble makes for an easy leveling experience to ensure the best performance - Removable breeze break allows effortless cleaning of SS pan, spill ring, base floor - Breeze break top pivots left or right to allow easy access for tall flasks and beakers The A&D Weighing Galaxy HR-100AZ Analytical Balance, 102 g, 0.1 mg, combines compact design with exceptional precision, suitable for a variety of lab and industrial environments. This model features the innovative Compact Super Hybrid Sensor (C-SHS), which not only saves space but also ensures rapid results with a 2-second stabilization time. Internal calibration is streamlined through a one-touch feature, making it easy for any user to execute, enhancing operational efficiency and ensuring reliable readings. Safety and convenience are at the forefront of the HR-100AZ's design. It includes a rugged, shatterproof breeze break with an anti-static coating to prevent contamination in sensitive work environments, such as pharmaceutical and food industries. The balance's doors are designed to rotate within their radius, requiring no additional space, which makes it ideal for use in tight spaces like glove boxes and fume hoods. Additionally, its breeze break can be quickly detached, even with gloves on, simplifying the cleaning process and ensuring the balance is safe for top-loading operations. The HR-100AZ supports a wide range of measurement units and offers features like statistical calculation, percentage analysis, and piece counting, catering to diverse analytical needs. A front-mounted illuminated spirit level ensures proper setup for optimal accuracy, and the large, backlit display enhances visibility under any lab conditions. All models in this series come equipped with features designed to enhance usability and accuracy, including rotary doors that save space and facilitate easy access. This analytical balance is designed for long-term reliability and simplicity, backed by a 5-year warranty, ensuring trustworthy performance for years to come. INCLUDED: The A&D Weighing Galaxy HR-100AZ Analytical Balance, 102 g, 0.1 mg includes: - Large Breeze Break w/ Antistatic Coating - Weighing Pan - Pan Support - Breeze Break Ring - Dust Plate - AC Adapter Plug - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Yamato SM-201 Sterilizer with Dryer 20L, 115V Operating Temperature Sterilization 105°C to 123°C Op (more)erating Temperature Drying 150 to 180°C Internal Capacity 20L Features - Automatic operations from sterilization to drying carried out with an interactive key input system - Quick sample drying capability makes samples ready to use right after sterilization - Drying temperature can be set according to sample material, quantity, etc. - Timer range from 1~999 hours - Drain bottle water level can be quickly confirmed on the front panel level indicator - Drain valve located in front for easy access - Absence of protrusions in sterilization chamber makes insertion & removal of baskets, and other items quick and easy - Self-diagnostic functions make operation safer and error recovery quicker - Condensation collector neutralizes high temperature exhaust steam safely High performance, fully automatic 20L standard steam sterilization from start to finish with high pressure steam sterilization and drying steps. Automatic operations from sterilization to drying carried out with an interactive key input system. Quick sample drying capability makes samples ready to use right after sterilization. Drying temperature can be set according to sample material, quantity, etc. Timer range from 1~999 hours. Drain bottle water level can be quickly confirmed on the front panel level indicator. Drain valve located in front for easy access. Absence of protrusions in sterilization chamber makes insertion & removal of baskets, and other items quick and easy. Self-diagnostic functions make operation safer and error recovery quicker. Condensation collector neutralizes high temperature exhaust steam safely. Sterilizing temp. range 105 to 123°C. Drying temp range 150 to 180°C. INCLUDED: The Yamato SM-201 Sterilizer with Dryer 20L, 115V includes: - 2 pcs. stainless steel mesh basket - Drain board, drain bottle, condensation collection container with magnetic bracket - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Made of fabric, protects device housing against dust, dirt, etc.

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.