Benchmark BSWPCR1 Block, PCR plate 96 x 0.2ml, skirted or non-skirted For 1-block dry bath only

This listing is for a Qiagen Qiagility PCR Prep System.The unit is in full working condition and is  (more)ready for immediate release.The Qiagen QIAgility Automated PCR Prep System provides users with a fully automated PCR setup, responsive software, and increased productivity. This compact, bench-top liquid handling robot eliminates the need for manual pipetting steps, with high precision and reproducibility. The Qiagen QIAgility uses Qiagen PCR kits and step-by-step guided software to automatically calculate all mixes and worktable set up so you won’t need to program pipetting steps. This PCR prep system uses a single-channel pipetting head with dynamic liquid level sensing and supports almost any kind of thermal cycler and lab ware.HEPA filter: Preinstalled dual-cartridge 3M Air-Mate HEPA (High-Efficiency Particulate Air) filter system provides positive pressure clean air within the closed hood.Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips.Pipetting head: Single-channelPrecision: CV <1%, 5–200 µl (dry-well transfer) CV <5%, 2–5 µl (wet-well transfer) CV <10%, 1 µlTable capacity:6 x SBS positions (127.76 x 85.48 mm) for adaptors and Tip Rack Holders 1 x Master Mix Block 1 x Reagent BlockTip disposal:All used tips ejected externally — no waste accumulation on the worktableTip volume:1–200 µlUV lamp Preinstalled UV lamp for worktable decontaminationDeck Dimensions 19.5×14”Dimensions 21x25x18″Electrical 100–240 V AC, 250 VA, 50–60 HzWeight 90.2 lbEnvironmental Tolerances Operating temperature, 15–30 °C (59–86°F), Operating humidity: 40–70%

This Applied Biosystems Veriti 96 Well Thermal Cycler was removed from a university lab where it was (more) surplus to requirements. This item powers on and is in good cosmetic condition with very minor surface damage. It has been tested with a digital thermometer (not included). It is in good working order. Block type: 96 well

QIAgility Automated PCR setup in all formats Pre-optimized experiment setup Standardized results and (more) increased productivity Elimination of manual pipetting steps The QIAgility is a compact benchtop instrument that enables rapid, high-precision setup of PCR experiments with ready-to-use software for ease and convenience. The software provides step-by-step guidance for worktable setup and automatic calculation of all mixes, eliminating the need to program pipetting steps. Just select the kit and cycler, define your targets and start the run.

The Thermo Scientific PikoReal 24 cycler is ideal for starting real-time PCR for low sample throughp (more)ut (24-well format). The PikoReal software offers simple and intuitive cycler operation and allows easy online control from your computer. The cycler has 5 detection channels, which detect hydrolysis (5’Nuclease / TaqMan) probes either as single color or multiplex samples. Thermal block The PikoReal qPCR system is controlled by PikoReal software, which allows remote monitoring of any qPCR experiment online from your own computer. Alternatively, you can save the qPCR protocol on a USB stick and load to the PikoReal instrument for stand-alone use. PikoReal software include modules for absolute and relative quantification, melting curve analysis, allelic discrimination and High Resolution Melting (HRM). Advanced algorithms provide effortless data normalization without the need for an external reference dye.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Reactor system for melts in a frame, with the following components: Oil bath (Lauda PJ12) Jacketed S (more)tainless steel flow reactor (64 ml, 200°C, 200 bar) Heated 2 L storage vessel 2 melt pumps: Pump cylinder volume is 200ml. Pumps are equipped with pressure transducers to measure a pressure unto 200 bar. All the parts are of stainless steel made.

‘Isopad‘ 12-fold heating mantle, type KEU/50ML-12

BAGS FOR THE TRANSPORT OF BLOOD PRODUCTS, TEST TUBES AND DRUGS MT 4 passive container manufactured b (more)y B Medical Systems. The special transport containers of B Medical Systems are made of polyethylene, by rotational molding and have an extraordinarily robust, almost indestructible casing, as demonstrated by numerous drop tests - Extremely light - Corrosion-resistant material for easier and safer handling of the instrument - Structure without corners and joints, which allows easy and thorough cleaning with conventional disinfectants - The clips can be sealed or padlocked to prevent unauthorized opening during transport - The polyurethane foam injected into the double walls of these transport containers is CFC and HCFC free, ensuring excellent insulation and protection even in long transport times and hot climates Insulation: 23-27 mm Storage capacity (gross volume of bags): 4 (450 ml) / 6 (270 ml) Cooling system: Passive External / internal material: polyethylene Inner container material: Polystyrene COLD LIFE (duration of passive refrigeration) at 32°C outdoors: up to 46 h at 43°C outdoors: up to 32.5 h Compliant with ADR, RID, IMDG, ICAO-TI, IATA-DGR, Class IIa medical device according to MDD 93/42 / EEC

AREC 10 Digital was designed for laboratory applications where a comfortable and large work surface  (more)is required, which here reaches 26x26 cm in size, the largest among the Velp series. The plate offers high resistance to acids, bases and solvents, while the technopolymer structure of the stirrer is designed to prevent accidental spills of liquids from reaching the electronic components, ensuring easy and quick cleaning. This translates into product safety and durability even in the most demanding laboratories; further protected by a 3-year warranty (subject to online registration). The heating uses the latest technologies available and ensures a uniform temperature across the entire plate and exceptional transfer efficiency. Same quality for agitation: SpeedServo™ technology and brushless motor offer precise and powerful agitation even when viscosity varies. In short, why we offer you AREC 10 Digital: - Easy to use and highly resistant to chemicals - Precise setting of temperature and agitation - Accepts volumes up to 25 liters / 30 kg - Possibility of precise thermoregulation of the fluid with Pt100/Pt1000 and VTF probes - Designed for durability and guaranteed for 3 years The powerful brushless motor of the AREC 10 Digital ensures stable and reliable stirring. The patented SpeedServo™ technology ensures constant speed even with variations in fluid viscosity. The always precise stirring speed, from chemical reactions to sample preparation, adjustable from 100 to 1500 rpm, it is ideal for any laboratory need. With a stirring capacity of up to 25 liters (H2O) (or 30 kg of liquid), the AREC 10 Digital stands out for its robustness and superior performance. Arec 10 reaches the remarkable temperature of +550°C in complete safety and control. Extremely precise, you can increase the temperature by +1.0°C. By connecting the external PT100 or PT1000 sensors you can directly thermoregulate the sample up to 350°C with an accuracy of ±1.0°C. Using VTF Digital instead you can control the temperature with a precision of ±0.5°C (up to a maximum of 300°C). In this regard, Arec 10 is available with different accessory packages. You will find all the combinations at the bottom. Safety during rescaling: - 'Hot surface' alarm when temperature exceeds 50°C, even when inactive. - Overtemperature alarm above 570°C 1 - Aluminum heating plate with ceramic coating 2 - Main switch 3 - Knob for stirring setting 4 - Knob for temperature setting 5 - Display

Speed range: 100 – 1400 rpm Max. stirring capacity (H₂O): 20 L Plate dimensions: Ø 145 mm Dimensions (more) (WxDxH): 173 x 277 x 94 mm Weight: 2.6kg

Precision of WLC balances Fast, accurate and repeatable weight determination. Energy-efficient elect (more)ronics and display, combined with an internal rechargeable battery, are the perfect duo to allow you to work without access to mains power. Precision not just in the name When we designed this balance, we took care of the smallest details &ndash; both those you can&rsquo;t see, hidden in the solid housing, and those you can touch. This balance is the result of a combination of our experience and true precision. The power of steel The use of stainless steel for the pan guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power The internal rechargeable battery combined with the energy-saving display and electronics allow many hours of operation without mains power. Time counts The balance is equipped with a real-time clock that provides accurate time measurement in a way that is independent of external power supply. There is potential Printer, computer, flash drive or additional display &ndash; you can easily connect them thanks to the fact that the balance is equipped with interfaces: 2 x RS232, USB type A and USB type B. Optionally, the balance can be equipped with 4 IN and 4 OUT. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Good ALIBI The ALIBI memory used in the terminal allows for safe storage of weighing records without the possibility of unauthorized interference. A single measurement remains in the ALIBI memory up to a preset limit number of days of storage, counting from the date it was taken. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.