Water purification equipment

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

This Barnstead NANOpure Diamond Water Purification System D11931  was removed from a university (more) lab where it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in reasonably good cosmetic condition with minor marks from use.

Elga PureLab Option with DV35 Reservoir This item was removed from a university where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This Amorgard ScrubKart Mobile Hand Wash Station was removed from a university lab where it was surp (more)lus to requirements. We were assured by the site that it is in good working order. The unit powers up but we did not test it further. It is in good cosmetic condition with some marks from use. Included with it are 4 x 10L Liquid Containers. 2 for clean water, and 2 for wastewater. Dimensions:L 65cm x W 75cm x H 1456cm

Purite Select Purification System L300150 with Storage Tank This was removed from a university lab w (more)here it was surplus to requirements. The system powers up and pressurises but was not tested further. It is in reasonable cosmetic condition with marks from use. Both filters, Pretreat 8 and Puripac PP8 expired 15/02/23 100L Storage Tank

SG Ultra Clear TUF UV Ultrapure Water System With Permeate Tank This system was removed from a unive (more)rsity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The lab confirmed it was not in working order but were unable to confirm the fault. It is sold for spares/repairs Included with the system is the following: - Permeate Tank - Cartridge Polisher - P/N- TR-2051 - DI Cartridge - P/N- TR-2050 - Carbon Pre-Filter - P/N- TR-2057 - Carbon Pre-Filter (expired) - P/N- TR-2057 - DI Cartridge (expired) - P/N- TR-2050 - User Manual

ELGA PURELAB Ultra ULXXXIOM2 MK2 Water Purifier Purification System This item was removed from a uni (more)versity where it was surplus to requirement. It is in good cosmetic condition and powers on, the previous client has stated it was in working order prior to removal. Also included are the following: 2 x Elga LabPure S1 Cartridges

ELGA PURELAB Ultra ULXXXIOM2 MK2 Water Purifier Purification System This item was removed from a uni (more)versity where it was surplus to requirement. It is in good cosmetic condition and powers on, the previous client has stated it was in working order prior to removal. Also included are the following: 2 x Elga LabPure S1 Cartridges

ELGA PURELAB Ultra IO MK2 Water Purifier Purification System This item was removed from a university (more) where it was surplus to requirement. It is in good cosmetic condition and powers on, the previous client has stated it was in working order prior to removal. Also included are the following: 2 x Elga LabPure S1 Cartridges

This item has just arrived in our stock. Please enquire for further details.

*Dimensions not added* BMM Weston Steam Generator Model 2616 w/ Lubron Osmostar 250 Water Purifier L (more)ab This system was removed from a university where it was surplus to requirement. Testing on these units is not possible due to the original hard-wiring of the steam generator and the presence of residual water in the filters and pipes. The steam generator will require re-wiring before use. Unfortunately, the copper pipes were cut during removal, rather than being properly disconnected, therefore, will require substantial recommissioning work to get the system up and running again. This system comprises the following: BMM Weston Steam GeneratorModel 2616Serial No. DH14744Two 30KW heating elements123-litre boiler capacity168˚C design temperature6.6 bar operating pressure Lubron Water Technologies Reverse Osmosis SystemModel Osmostar 250Serial No. 10022407Year 2010250 litres per hour, 30 bar working pressure Lubron Softstar Water SoftenerSerial No. 10012208Year 2010

This Evoqua Ultra Clear UV UF Water Purification System was removed from a university lab where it w (more)as surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in reasonably good cosmetic condition with minor marks from use. Operation hours since last service - 703UV Lamp hours - 703

J. Bibby Water Still Model W14S This was removed from a university lab where it was surplus to requi (more)rements. The unit powers up and is in good cosmetic condition with minor marks. Serial No. W14S 85/1168

This Purite Select BIO40/BP/IT Water Purification System was removed from a university lab where it  (more)was surplus to requirements. The unit is in reasonable cosmetic condition but has some marks from use. It powers up and the screen is clear. It will likely need servicing before it is used again. The UV lamp hours are at 6000. The forecast change date is 14/12/23. Filter replacement was due 22/01/21. DI pack replacement was due 22/01/21. It has not been tested further.

TripleRed Alto-UF-R Water Purification System Lab This system was removed from a university lab, whe (more)re it was surplus to requirements. Both devices power up and communicate, but we are unable to them further at our facility. This system is in good overall cosmetic condition. A password is required to operate the system, which is available on request.

Elga PureLab Flex Model-PF2XXXXM1 Lab This item was removed from a university where it was surplus t (more)o requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Avidity Alto Water Purification System Lab This system was removed from a university lab, where it w (more)as surplus to requirements. Both devices power up and communicate, but we are unable to them further at our facility. This system is in good overall cosmetic condition. A password is required to operate the system, which is available on request.

ELGA PURELAB Ultra GE Genetic MK2 Water Purifier Purification System This was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. Max Pressure inlet - 0.7/10Max Pressure Working - 5.5/80 Comes with : 2 X ELGA Labpure S1 - Part No. LC1822 X ELGA Sanitisation Block - Part No. LA6981 X UV Filter1 X ELGA Ultrafiltration Cartridge - Part No. LC151

This listing is for a Hanna Conmet 1 Pocket Portable Conductivity Tester. The unit is in full worki (more)ng condition and is ready for immediate release. Hanna Conmet 1 Pocket Portable Conductivity Tester Experience precision on-the-go with the Hanna Conmet 1 Pocket Portable Conductivity Tester, your compact solution for measuring water conductivity with ease! Key Features: Measurement Range: Accurately measures conductivity from 0 to 1999 µS/cm with a resolution of 1 µS/cm. Reliable Accuracy: Ensures dependable results with an accuracy of ±2% Full Scale. Automatic Calibration: Simplifies the calibration process with automatic adjustments at 1413 µS/cm. Temperature Compensation: Features automatic temperature compensation from 0 to 60°C (32 to 140°F), with a coefficient of 2%/°C, ensuring accurate readings in varying conditions. Long Battery Life: Powered by 2 x 1.5V batteries, it boasts approximately 200 hours of usage, complemented by an auto-off feature after 5 minutes of inactivity. Compact Design: Measures 180 x 50 x 25 mm and weighs only 50 grams, making it highly portable. Ideal Applications: Water Quality Testing: Perfect for assessing the conductivity of drinking water, water conditioning, and reverse osmosis systems. Field and Laboratory Use: Its lightweight and compact design make it suitable for both fieldwork and lab environments, allowing for versatile application.

This listing is for a Elga Purelab Option Water Purification System with 40l Tank. The unit is in f (more)ull working condition and is ready for immediate release. Optimize your laboratory's water quality with the Elga Purelab Option Water Purification System, designed to deliver high-quality Type 2 water for various laboratory applications. Key Features: Type 2 Water Purification System: Perfect for general laboratory use and feeding Type 1 water purification systems, ensuring you have reliable water quality for various experiments. 40L Storage Tank: Equipped with a spacious 40L tank, providing ample storage for your purified water needs, minimizing the need for frequent refills. Advanced UV Treatment: Features a dual-wavelength UV lamp (185/254 nm) that facilitates photo-oxidation of feed water, significantly reducing Total Organic Carbon (TOC) levels to less than 30 parts per billion (ppb)—ideal for sensitive applications. High-Quality Deionization: Utilizes a deionization cartridge to achieve resistivity levels ranging from 1 to 10 megohm.cm, ensuring high purity water suitable for critical lab tasks. Built-in Boost Pump: The integrated boost pump facilitates the recirculation of treated water, enhancing the system's efficiency and maintaining water quality over time. Compact and User-Friendly Design: Designed for ease of use, the system’s compact footprint makes it suitable for various lab setups without compromising space. Specifications: Water Flow Rate: Capable of delivering up to 7.5 liters per hour (LPH), ensuring a steady supply of purified water for your laboratory requirements. Resistivity Levels: Achieves resistivity ranging from 1 to 10 megohm-cm, providing high-quality water suitable for sensitive analytical applications. TOC Reduction Performance: Effectively reduces TOC levels to less than 30 ppb, critical for applications requiring ultra-pure water. UV Lamp Specifications: The dual-wavelength UV lamp (185/254 nm) not only assists in TOC reduction but also helps in the disinfection of water, enhancing its overall quality.

ELGA Purelab LA620 DV 35 Water Purification Unit Lab This item was removed from a university where i (more)t was surplus to requirement. It is in good cosmetic condition and powers on. We are unable to conduct further testing at our facility. Includes: - 1 x ELGA Sanitisation Block - LA567 - 1 x DI Cartridge Pack - 1 x ELGA Pretreatment Cartridge Part No. - LC140 Features: - Max Pressure inlet - 0.07/1 - Max Pressure Working - 0.07/1 - Serial No. - 620L2323233 - Version - PURELAB Option-S v21.01.

Triple Red euRO 40 Reverse Osmosis System This system was removed from a university where it was sur (more)plus to requirements. The system is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility. Included: - euRO Storage Tank 80L with Booster Pump - Avidity Carbon Pre-Filter - P/N: TR-2057 - Install Date: 9/8/22 Specifications: - Model: euRO 40 Reverse Osmosis System - Serial No.: 1023236-01

Triple Red Duo Organic 60 Ultra Pure Water Purification System This item was removed from a universi (more)ty where it was surplus to requirements. The item is in good cosmetic condition and powers on. However, we were unable to perform further testing at our facilities. Please note: The power supply is not included. Testing was carried out using a power supply from another unit. Included Components: - Avidity Carbon Pre-Filter - P/N: TR-2057 - Install Date: 26/7/23 - Avidity Cartridge Pack - P/N: TR-2050 - Install Date: 26/7/23 - Avidity Cartridge Polisher - P/N: TR-2051 - Install Date: 26/7/23 Specifications: - Model: Organic 60 Ultra Pure Water Purification System - Serial No.: Not provided

This was removed from a university lab where it was surplus to requirements. We were unable to test  (more)the unit as it was not supplied with the PSU Max Pressure: 1.5/22 Inlet.bar/psi: 1.5/22 Working.Elga LC197 - Biofilter fitted - Expiry Date 2020-02.Purelab Flex Purification Pack LC208 fitted - Batch No. G34/17 Use By: 16/01/20.

Avidity Alto Water Purification System Lab This system was removed from a university lab, where it w (more)as surplus to requirements. Both devices power up and communicate, but we are unable to them further at our facility. This system is in good overall cosmetic condition. A password is required to operate the system, which is available on request.

Elga UHQ-PACKA Replacement Purification Pack for PURELAB UHQ Systems This was removed from a univers (more)ity lab where it was surplus to requirements. The unit is brand new an unused. The box contains the following; Organic Adsorption Cartridge x2Part#: UHQ-1 Ion Exchange Cartridge x2Part# UHQ-2

Avidity Alto Water Purification System Lab This system was removed from a university lab, where it w (more)as surplus to requirements. Both devices power up and communicate, but we are unable to them further at our facility. This system is in good overall cosmetic condition. A password is required to operate the system, which is available on request.

Rephile NuZar U24 water purification system. Type I and RO water from tap water directly. Two ergono (more)mic dispensers with 2.4″ color touch screen with adjustment of dispensing rate (up to 2 L/min), manual and volumetric dispensing. Automatic cleaning cycles for the reverse osmosis membrane (Cl2 and pH cleaning). Self-maintenance functions for maximum efficiency and lifetime of the reverse osmosis membrane. Stable reverse osmosis permeability over a wide temperature range. Automatic data backup up to 2 years. Easy data transfer via multiple interfaces, such as LAN, USB, etc. Intuitive display: water quality with temperature compensation, volumetric dispensing and flow rate. 10 L quality HDPE storage tank integrated into the system, optionally expandable. Ultrapure Water (Type I) applications: HPLC mobile phase preparation, preparation of reagent blank solutions, sample diluent for GC, HPLC, ICP-MS or other analytical techniques, preparation of buffers and culture media for cell culture, and preparation of molecular biology reagents, etc. RO water applications: washing machine for glassware cleaning, feed water for laboratory animals, feed water for humidifiers, autoclaves, etc., water supply for ultrapure water systems, and hydroponics.