Thermo Fisher Model Safe 2020 1.5 Class 2 Biological Safety Cabinet Lab

This Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E  Series 6 was removed from a (more) university lab where it was surplus to requirements. The item powers on with blowers and both Light & UV working. The blower will only work when the sash is at the correct working height. This is marked on the side of the unit. When it is dropped fully the blower switches off as it should. When it is raised above the mark the windows alarm goes off as it should, until the sash is dropped back to the correct working height. The unit starts up as it should and shows 'low' airflow initially until it builds up to the correct flow. It then raises above the correct flow and the 'HI' alarm sounds. We spoke to a service engineer and they suggested that it will just require calibrating upon installation. It will need commissioning upon installation anyway. The lab reported that the filter has been removed. Inside dimensions - D57.5 W118 H72cm

Cytiva Xuri Cell Expansion System W25 Lab This system was removed from a university lab where it was (more) surplus to requirement. All units are in good cosmetic condition and powered up, we are unable to test the system further at our facility. The PC has no software but is included as it may have relevant hardware. This system comprises the following: Cytiva XuriTM Cell Expansion System W25 base unitCytiva Xuri Cell Expansion W25 PumpCytiva Xuri Cell Expansion W25 CBCU Dell Vostro PC, LG Flatron L1915S Monitor

Selecta PREBATEM TFT refrigerated incubator. Digital. 36 L capacity. Temperature range from 5 ºC to  (more)60 ºC. Stability ±0.1°C, homogeneity ±0.3ºC. Forced ventilation. Microprocessor control. Two shelves. RS 232 output. Safety thermostat. Dimensions (W*H*D): external 650*600*490 mm; internal 400*300*300 mm. 54 kg. User manual. The Selecta PREBATEM TFT refrigerated oven for adjustable temperatures from 5°C to 60°C is used in thermal treatments of samples for drying, curing, cultivation or conservation at constant temperature. It is suitable for applications in biotechnology, bacteriology, plasma fractions, biology, enzymatic test, metrology, cosmetics, water analysis, among others.

Slanted electrical front window Plugged holes in side windows Double socket UV light with magnetic f (more)astening Air flow: 0.45 m/s Recirculation air volume: 965 m3/h Exhaust air volume: 383 m3/h Total air volume: 1348 m3/h Dimensions (WxDxH): 1280 x 840 x 1380 mm Internal dimensions (WxDxH): 1190 x 600 x 665 mm Support frame height: 800 mm Weight: 281 kg

Type CA/REVS6 Prefilter 40 168cm DIN 12950 T Downflow filter: 18P6+ Exhaust filter: 7P6+ Counter: 78 (more)943.72h 129 x 83 x 222cm Outside Dim: 1480 x 1900 x 860 mm Internal Dim: 690 x 1800 x 600 mm Frame height: 755 mm The sterile air flow in the cabinet keeps the material free from contamination and pollution (product protection); the downflow also provides reasonable protection against cross-contamination during the experiment. Due to the intake of air from the laboratory room, a protective air curtain is created at the front of the cabinet (personal protection).

Front aperture (work mode)(HxL): 165 x 1800 mm Front aperture maximum height: 350 mm Dimensions (LxD (more)xH): 1943 x 844 x 1552 mm Interior dimensons (LxDxH): 1800 x 605 x 725 mm Work area(LxD): 1719 x 440 mm Weight: 315 kg

Binder CO2 Incubator CB 160 Lab This item was removed from a university where it was surplus to requ (more)irement. The system has been professionally serviced and is in full working order. A report is available on request. Requires CO2 connection fitted. It is in great cosmetic condition. 2 x Shelf (60x60cm)

The AK-5/100 STENT automatic balance for stents operates with the readability of d = 0.1 μg. The  (more)device features a special working mode which makes it possible to analyse the change in sample mass during the technological process. Automatic Operation Automation of the weighing cycle, thanks to the elimination of an error being a result of the human factor, is a guarantee of measurement repeatability and accuracy impossible to be obtained in the case of manual weighing. Stent Container Automatic balance for stents, the AK-5/100 STENT, enables users to create identical test conditions for the entire stent series. With use of the stent container, the user can weight a series of 5 stents maximum, one by one, thus the necessity to place one stent on the pan each time is avoided. Accessories for Stent Weighing Weighing pan of custom design allows convenient weighing of 40 mm stents with a diameter of even 20 mm. A special applicator facilitates stent loading. Spacious Chamber and Ease of Operation In the weighing chamber there are perfect conditions necessary to enable highly precise weighing. The spacious chamber makes loading of the weighing pan with stents comfortable and uncomplicated. Measurement of Ambient Conditions in the Weighing Chamber The automatic balance for stent weighing, AK-5/100 STENT, is equipped with a high-class thermo-hygro-barometer allowing to test ambient conditions in real time with the accuracy of: ± 1 hPa (pressure) / ± 1.8% (humidity) / ± 0.1 °C (temperature).

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.

Thermo Scientific 75003181 Swing Bucket Rotor, TX-400 The Thermo Scientific 75003181 Swing Bucket Ro (more)tor, TX-400, is a high-performance centrifuge rotor designed for use with several Thermo Scientific centrifuges, including the Sorvall Legend X1, Sorvall ST 16, Multifuge X1, Megafuge 16, and SL 16. With a maximum capacity of 4 x 400ml, this rotor allows for efficient processing of high volumes of samples. The swing bucket design allows for easy loading and unloading of samples, and the rotor's compatibility with multiple centrifuges makes it a versatile solution for laboratories with a range of centrifuge models. With a maximum speed of 5,000 RPM and a maximum RCF of 4,696 x g, the Thermo Scientific 75003181 Swing Bucket Rotor, TX-400, is capable of medium-speed separations, making it ideal for a wide range of applications, including molecular biology, biochemistry, and clinical research. Please Note: Adapters are NOT INCLUDED with these buckets, please inquire. INCLUDED: The Thermo Scientific 75003181 Swing Bucket Rotor, TX-400 includes: - 75003181 TX-400 Swing Bucket Rotor - Set of 4 x 75003655 Buckets - Full 1 Year Parts and Labor Warranty Thermo Scientific 75003181 Swing Bucket Rotor, TX-400 SpecificationsMaximum Speed5,000 RPMMaximum RCF4,696 x gMaximum Capacity4 x 400mlMaximum Radius16.8 cmCentrifuge CompatibilityThermo Scientific Sorvall Legend X1, Sorvall ST 16, Multifuge X1, Megafuge 16 & SL 16 Centrifuges

Gilson Pipetman Neo 12x20 Multichannel PipetteFeatures - Redesigned tip ejector and ejection springs (more) reduces tip ejection forces - Unique clip ejector fits securely into the body of the pipette to avoid slipping over time - PVDF handle limits the transfer of heat from hand to the pipette and is resistant to aggressive chemicals - Stainless steel tip ejector resists corrosion and offers a smooth tip ejection stroke - Color-coded push-button for ease of identification - Unique tip holder allows for a secure fit of most brands of tip - Models P2N and P10N incorporate dual position tip ejectors, allowing the use of D10 (short) and DL10 (long) Quick and user-friendly maintenance allows for less downtime and longer product lifetime With pipettes ranging from 0.2µL up to 10mL, the Gilson Neo line has you covered Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Neo offers uncontested durability and reliability. PIPETMAN Neo is performance and precision exemplified. It provides all the benefits that built the reputation of the legendary PIPETMAN Classic, with the added bonus of increased comfort. Easy to use, you will especially appreciate the smoothness of the piston stroke. With uncontested reliability and durability, PIPETMAN Neo is the economical solution to years of pipetting comfort. PIPETMAN Neo is the new comfortable generation of the PIPETMAN Classic that minimizes required pipetting forces for smooth and easy daily use. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman Neo 12x20 Multichannel Pipette includes: - Operator's Guide - 1 Year Manufacturer Warranty Gilson Pipetman Neo 12x20 Multichannel Pipette SpecificationsModel12x20Cat # F14402Volume (ul)21020Max. Permissible Systemic Error (ul)± 0.10± 0.20± 0.40Max. Permissible Random Error (ul)≤ 0.08≤ 0.10≤ 0.20Comparison of ModelsSpecificationsGilson Pipetman Neo 8x20Gilson Pipetman Neo 12x20Gilson Pipetman Neo P8x200Gilson Pipetman Neo 12x200Volume (ul)22202010101001002020200200Max. Permissible Systemic Error (ul)± 0.10± 0.10± 0.50± 0.50± 0.20± 0.20± 1.00± 1.00± 0.40± 0.40± 2.00± 2.00Max. Permissible Random Error (ul)≤ 0.08≤ 0.08≤ 0.25≤ 0.25≤ 0.10≤ 0.10≤ 0.40≤ 0.40≤ 0.20≤ 0.20≤ 0.60≤ 0.60.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

The cryostat 500 OM is a highly efficient microtome for a cutting temperature range down to -40°C. D (more)esigned as an upright standing unit with an opn-top working area, the instrument allows convenient and ergonomic handling in standing and sitting position. Cooling of chamber (at 20°C ambient temp): 20°C down to -40°C NB: Cooling of specimen: Disabled Section thickness range: 0.5 – 90 µm Resolution: 0.5 – 2 µm: 0.5 µm 2 – 10 µm: 1 µm 10 – 20 µm: 2 µm 20 – 50 µm: 5 µm 50 – 90 µm: 10 µm Trimming thickness range: 5 – 300 µm Resolution: 5 – 10 µm: 5 µm 10 – 100 µm: 10 µm 100 – 300 µm: 100 µm Specimen retraction during return travel: 40 µm Horizontal feed range: 28 mm Vertical specimen stroke: 64 mm Coarse feed: 800 µm/s Dimensions (WxHxD): 840 x 1120 x 780 mm Weight: 180 kg