Mixed Job Lot of Laboratory Equipment - Waters, Schott, Extreme Networks, Roche

This listing is for a KNF Laboport N 840.3 FT.18 Diaphragm Vacuum Pump.The unit is in full working c (more)ondition and is ready for immediate release.Chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.100% oil-free displacement, so media cannot be contaminated by transfer, evacuation or compressionHigh resistance to vapours and condensatesChemically resistant, suitable for use with very aggressive and corrosive gases and vapoursMaintenance-free, environmentally friendly; the pumps use no water and so produce no contaminated waste waterApplication: Fluid aspiration, degassing, gel drying, rotary evaporation, centrifugal concentration, distillation.Includes diaphragm with patented tension optimisation, which allows the pump size to be smaller and extends the service life of the diaphragm. All parts that come into contact with the media are comprised of chemically resistant fluorinated plastics.

This Thermo Scientific LTQ Orbitrap XL Hybrid Ion Mass Spectrometer was removed from a university la (more)b where it was surplus to requirements. The system powers up and is in excellent cosmetic condition. It was confirmed by the lab that it was working when last used in December 2022, though it is out of service. Included in the system are; 1 x Thermo Scientific LTQ Orbitrap XL.1 x Thermo Scientific LTQ XL.1 x Thermo Scientific Neslab ThermoFlex 900.1 x Edwards 28 Vacuum Pump.1 x Edwards 30 Vacuum Pump.1 x Orbitrap Extractive Operations Training Course Manual.1 x LTQ Orbitrap Biotech Operations Training Course Manual.1 x Thermo Scientific LTQ Manual.1 x Thermo Scientific LTQ Orbitrap XL Hardware Manual.2 x Thermo Scientific LTQ Orbitrap XL 2.5.5 Software.1 x Thermo Scientific LTQ 2.6.0 SP1 Instrument Control.1 x Thermo Scientific Xcalibur 2.0.7 SP1.1 x JAI CV-A55 IR Camera & housing.

This Bio-Rad PDS-1000/He Biolistic Particle Delivery System was removed from a university lab where  (more)it was surplus to requirements. The system powers up but we were unable to test this further at our facility. It is in good cosmetic condition with marks from use throughout. Also included are the following:1x Circle Seal Control Solenoid3000 PSI 1x Busch PumpModel: KB 0010 D 100S/N: 01017631 1x Bio Rad PDS Voltage Converter1x USA Power Cable1x Australia/China Power Cable

Chemical resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, base plate and two separ (more)ator bottles on the suction and pressure side. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive/corrosive gases and vapours. Technical features Flow rate (max.): 20 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5°C and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Filtration Degassing Vacuum oven Centrifugal concentration Qualitative characteristics Ideal for extremely aggressive / corrosive gases and vapors High compatibility with steam and condensate Integrated gas ballast valve Integrated control of the rotation speed 3-color status display for running / stand-by / error Compact, silent and reliable Chemically resistant compound vacuum system diaphragm vacuum pump, base plate and two separating bottles on the suction and pressure sides Modular; expandable 100% oil-free transfer - then pure transfer, evacuation and compression of gases High compatibility with steam and condensate Ecological Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

The N 820.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products.  The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications.  When the humid gases are sucked in, condensation may form in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow rate (max.) 20 l / min Final vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Fluid temperature allowed at 5-40°C FFPM valve material PTFE coated diaphragm material Pump head material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Max pumping speed 50/60 Hz: 1.9/2.2 m³/h Ultimate total pressure (absolute): 100 mbar Volume collect (more)ing bottle: 4 L Dimensions (DxWxH): 420 x 300 x 500 mm Weight: 11 kg

Applikon Biotechnology EZ-Control Z310110010 Bioreactor System This was removed from a laboratory w (more)here it was surplus to requirements. Included are; Applikon Biotechnology EZ-Control Bioreactor SystemCat no. Z310110010SN - P18662/39Unit dimensions - L41 W37 H72cmThe unit powers on and boots up. Parts:-Applikon Type P100eCat no. Z510000010SN - P323750/22 Applikon Water Console Applikon 7L Glas Biorector Vessel with Heat jacket Trolley Dimensions - L108 W61 H144cmBottom Shelves - 70 x 59cm Consumables/Accessories:-Applikon 20L Appliflex Reusable pH & DO Sensors Cat no. Z650002040Applikon 10L Appliflex Reusable pH & DO Sensors Cat no. Z650001040Box of 2 x AppliSens Sensor ProbesBox of 1 x AppliSens Sensor ProbeMembrane Kit Z110000426Ethernet cableVarious metal partsApplikon Slotted Blindstopper M18 X 1.52 x Applikon Air Inlet Pipe+Porous Sparger 7LApplikon Ribbed Blindstopper M30X1Applikon Assembly Holder M10Ass holder 6mm tube M18x1.5Various probe cablesApplikon Licence file EZ Control + Manuals Dongle Z310110010Heat Jacket - Powers on and heats up

Packard Cobra II Gamma Counter Model D5010 System Lab This system was removed from a university lab, (more) where it was surplus to requirements. All included units are in good cosmetic condition and powered on. The system is fully functional, and the PC powered on successfully. The software and syringe runners are operational, though the system requests a printer connection. Overall, the system is ready for use and in working order. Also included are the following; 1x Dell Monitor MM/N: E773sS/N: MY-OY1352-47603-4B4-B7T3 9x Syringe type tubes 1x Keyboard PS2 1x Bag of plastic tips 3x Plastic tip holders 5x Plastic lids 2x VGA type cables 2x Power leads 1x Power lead adaptor 2x Metal hook fixtures 2x 2 amp fuses 1x 15 amp fuse 1x Length of plastic tubing 1x bag of of metal hook fixtures 2x Thin wired VGA type connectors 6x Pipe connectors 1x Box of thin glass tubes (x5) 2x Boxes of assorted fixtures and fittings 1x Force Sensor (capteur de force)M/N: ELJ-S045C-35GS/N: R04074 1x Floppy Disc Cobra II Backup

Ohaus ISLDMPHDG Incubating Shaker The Ohaus ISLDMPHDG Incubating Light Duty Shaker is designed to in (more)cubate samples from 5° ambient to 65° C depending on the model and are optimized for shaking microplates, deep-well plates, or micro-tubes. The ISLDMPHDG has an 8 lb (3.6 kg) capacity while the Incubating Microplate Shaker can hold up to four standard or deep well plates. Incubating-Cooling Mini Shaker is designed to hold two microplates or two optional modular tube blocks. The ISLDMPHDG features LED displays with touchpad controls. The variable speed microprocessor control provides consistent, uniform shaking action. The microprocessor will display the last setpoint and will restart if power is interrupted. Triple eccentric drive with permanently lubricated ball bearings and maintenance-free brushless DC motor provides reliable service and continuous duty operation. Units slowly increase speed to desired setpoint to avoid splashing. Digital models feature overload protection. Audible and visual signals activate when the system detects obstruction or tray overload. The Ohaus ISLDMPHDG Incubating Shaker is brand-new . Includes: Power Cord Operator's Guide Manufacturer's Documentation Full 2 Year Parts and Labor Warranty Ohaus ISLDMPHDG Incubating Shaker SpecificationsTemperature RangeAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°CSpeed Range100 to 1200 rpmSpeed Accuracy± 2%Timer1 second to 160 hoursOrbit3 mm (0.12")Maximum Weight Capacity4 microplates or 2 micro-tube racksTray MaterialAluminumTray Dimensions (L x W)11 x 7.75" (27.9 x 19.7 cm)Overall Dimensions (L x W x H)17 x 11 x 7.75" (43.2 x 27.9 x 19.7 cm)Ship Weight30 lbs (13.6 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(4) { background-color: #fffacd; }

F2 Mass Standard - knob weights, service case. Nominal value - 250 kg.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW