Thermo Scientific LTQ Orbitrap XL Hybrid Ion Mass Spec & Neslab ThermoFlex 900

Finnigan Mat Circuit Boards P/N 2036700 S- 2036720 S- These were removed from a Thermo Finnigan MAT  (more)system. Included are; 4x Finnigan Mat Circuit boards Part no's. •2036700 S- •2036720 S-

This Varian MS System was removed from a university lab where it was surplus to requirements. The sy (more)stem is made up of; Varian IT Mass SpectrometerModel - 210-MSPowers on The lab informed us that the MS is faulty. It has a faulty transfer line heater. It is in reasonable cosmetic condition with marks from use. The grills on the fans have rusted, but the lab informed us that the rust was purely cosmetic and had nothing to do with the fault. The system is sold for spares/repairs.

Waters Micromass Q-Tof micro Mass Spectrometer This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up but has not been tested further. We have been advised that it will require flushing out before it can be used. It is in good cosmetic condition with minor marks.

Thermo Elemental X Series ICP-MS Mass Spectrometer w/ Software & Accessories This was removed fr (more)om a university lab where it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. We are told it was working when it was last used in 2020. It is in good cosmetic condition with minor marks. Included with it are; Original software on CD-ROM X Series PlasmaLab 2.6 ICP-MS softwareSeveral manuals, safety, performance and maintenance schedule, pre-installation and operationNew and used spare skimmer and sampler conesSpare electron multipliernew and used spare printed circuit boardsVarious tubing and connectorsPacket of various Thermo O ringsMany other unidentified small parts in sealed packaging

Thermo Finnigan LCQ Advantage Mass Spectrometer Surveyor LC-MS System This was removed from a univer (more)sity lab where it was surplus to requirements. The lab confirmed that everything was in working order prior to removal. We have powered up everything but were unable to test further at our facility. All the units are in good cosmetic condition with minor marks. Included are; 1 x Thermo Finnigan LCQ Advantage Mass Spectrometer SystemSerial No. LAD00300 1 x Surveyor PDA DetectorPart No. SRVYR-PDA5Serial No. 56866 1 x Surveyor AutosamplerPart No. SRVYR-ASSerial No. 77269 1 x Surveyor MS PumpPart No. SRVYR-LPUMPSerial No. 62615 1 x Edwards 28 Vacuum PumpModel E2M28Serial No. 170517841 Supplied with:1 x Xcalibur LCQ Advantage Revision 1.3.1 x Xcalibur LCQ Advantage/DecaXP Revision 1.3 SP1.1 x Xcalibur Core Data System Software Revision 1.3.1 x Thermo MSQ 2.0 SP2 Instrument Control.1 x Thermo Xcalibur 2.1 W/Foundation 1.0.2 Rev.B.1 x Thermo Xcalibur LC Devices 2.4.0.2 x Thermo Xcalibur LC Devices 2.3.0 Software.1 x Thermo TSQ Series 2.1.1.1 x Thermo SurveyorPlus Manual Set.1 x Thermo Part No. 23043457 Start cable Integrator/Gtrace.1 x Thermo Part No. 23038071 Recorder Cable L=1900mm.1 x Emerson Industrial Automation Leroy-Somer Engine;2 x Spark Generators;1 x PULNIX 20mm CCD Camera;5 x Cables;3 x Spacer 7.7x3.2;1 x Spacer 6.3x3.2;2 x ThermoFisher Scientific Tubing Fused SI 150Ux390U;2 x Storer: TFS;1 x ThermoFisher Scientific Insulator Heater APCI;1 x O-Ring;1 x Plunger.

Freeze dryers pilot-scale BK-FD20/30 Series. Models: standard (BK-FD20S and BK-FD30S), with stopper (more)ing (BK-FD20T, and BK-FD30T). Temperature min. trap of cold -80ºC. Temperature trays adjustable from -50ºC to +70ºC. Precongelación and drying in the same space. Vacuum < 0.1 mBar. Ability to trap cold 13.5 L. Ability to capture water 6.5 kg/24h. Total capacity of liquid 4.5 L (BK-FD20x) or 7-L (BK-FD30x). Dimensions: trap cold 240x300 mm (diameter/height); camera freeze-drying 470x485x420 mm; trays 305x405x17 mm Trays heated by silicone oil. Touch-screen LCD. Register of historic data a month. USB for data export. Includes vacuum pump 22m3/h. The price shown is for the model BK-FD20S. For other models consult the drop-down.

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

A programmable laboratory oven with multiparametric microprocessor with the possibility of memorizin (more)g 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 300°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable OVEN STF-NR FALC

Busch Maulburg LS 80 L2 Motor Pump This item was removed from a university lab where it was surplus (more) to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Eppendorf 2 x 50ml Adapters, Cat. # 5804785002 The Eppendorf 2 x 50ml Adapters, Cat. # 5804785002 ar (more)e for use with the Eppendorf S-4-72 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 2 x 50ml conical skirted bottom tubes each with the maximum tube dimensions (Diameter x Height) of 31mm x 120mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 2 x 50ml Adapters, Cat. # 5804785002 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 2 x 50ml Adapters, Cat. # 5804785002 SpecificationsBottom ShapeFlatRotor CompatibilityEppendorf S-4-72 Swing Bucket Rotor

Adam Equipment SAB 514I Solis Analytical Balance, 510g, 0.0001g Capacity 510g Readability 0.0001g R (more)epeatability 0.0002g Features - High-resolution graphic display is amply sized for clear visibility - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Large, grade 304 stainless steel pan allows swift cleaning - RS-232 interface provides speedy connection to computers and printers - External calibration allows for verification and adjustment with weights ("I" models feature internal automatic calibration) - Selectable digital filtering helps minimize effects of vibration and disturbances - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Multilingual display permits use in various regions - Check weighing with audible alarm - Parts counting with preset sample sizes - Security slot for optional lock and cable to help prevent theft The Adam Equipment Solis Analytical and Semi-Micro Balances are ideal for research and quality assurance labs, science education, precision counting, production, and manufacturing applications needing precision results. Users can readily view the comprehensive data on the amply sized graphic display. A multilingual display capability permits use of the balance in various regions, while recognizable icons help the weighing process flow smoothly. Formulation is simplified, as Solis stores up to 99 ingredients. The Solis keypad is simple to use, with easy-to-read buttons and helpful navigation arrows for uncomplicated operation. Solis models offer capacities from 120g to 510g and readabilities from 0.01mg/ 0.1mg to 0.0001g. The Solis Analytical and Semi-Micro Balances provide an outstanding solution for a variety of lab applications. INCLUDED: The Adam Equipment SAB 514I Solis Analytical Balance, 510g, 0.0001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty